Question about Nissan Pathfinder

Open Question

Where is the camshaft position actuator located for a 2003 nissan pathfinder 3.5 litter

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 462 Answers

SOURCE: p0014 engine code

THE CAM SHAFT ACTUATOR IS LOCATED IN THE CYLINDER HEAD ON THE FRONT RIGHT HAND SIDE JUST ABOVE THE POWER STEERING PUMP. AFTER YOU REMOVE THE ACTUATOR CHECK TO SEE IF ANY OF THE SCREENS ARE DAMAGED OR MISSING. IF SO REPLACE THE ACTUATOR. ALSO CHECK THE CRANKSHAFT END PLAY. IT SHOULD BE BETWEEN 0.0044" - 0.0153". if excessive crankshaft end play is causing this concern, it will be obviously out of specification by as much as.050" or more when a pry bar is used to move the crankshaft back and forth. IF THIS IS THE CASE AN ENGINE REPLACEMENT IS RECOMMENDED DUE TO THE AMOUNT OF DEBRIS IN THE ENGINE. IF NO EXCESSIVE CRANKSHAFT MOVEMENT NOTICED REPLACE THE CAM ACTUATOR. IT WILL ALSO BE NECESSARY TO DO AN OIL CHANGE.

Posted on May 23, 2009

Ad
youredone82
  • 426 Answers

SOURCE: where is the Throttle Positioning Sensor located

The throttle positioning sensor is actually mounted to the throttle body on the opposite side of the throttle cable. there are diagrams that show most sensor locations but not 100% of all sensors

Posted on Aug 29, 2009

  • 170 Answers

SOURCE: The camshaft position sensor has

JUST REPLACE IT IN THE SAME POSITION THAT IT CAM FROM

Posted on Sep 01, 2009

dttech
  • 4803 Answers

SOURCE: where is the camshaft positioning sensor located

Your 2004 Nissan Quest is most likely to be equipped with a 3.5L V-6 engine. This engine has 2 Cam (PHASE) sensors. One is located in the back of each cylinder head. You must remove your intake air duct to see them.

Posted on Oct 17, 2009

  • 2 Answers

SOURCE: crankshaft and camshaft sensors location in nissan altima 2003

You are incorrect sir. There is a very good Youtube video showing you exactly where it is that is how I changed mine. The Crankshaft is located behind the engine block below and around from the cam sensor which is easly spotted looking at the engine. The crankshaft is in a difficult spot but once you figure out where it is it's easy...ish hope this helps

Posted on Dec 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0014 Diagnostic code, already replaced camshaft actuator & oil twice


code p0014 - Chevy TrailBlazer, TrailBlazer SS and GMC Envoy Forum

forums.trailvoy.com > ... > OEM Issues

Sep 8, 2007 - 11 posts - ‎8 authors
On my Trailblazer I have a code P0014 . this says Camshaft Position Actuator B ... If the desired and actual cam phase angle error exceeds its ... This diagnostic procedure supports the following DTC: ... replace the camshaft actuator solenoid, change the engine oil and filter, ... 2004 Chevy TrailBlazer LT P0014 - Camshaft Position Actuator Solenoid "Relearn"
11 posts
Dec 11, 2009
cam crank sensor mismatch
11 posts
Jul 4, 2009
More results from forums.trailvoy.com

Tech Code "dtc P0014" 2003 Trailblazer - Chevy S-10/Blazer ...

www.gm-trucks.com/.../72278-tech-code-dtc-p0014-2003-trailblazer/

Dec 31, 2007 - 14 posts - ‎6 authors
Tech Code "dtc P0014" 2003 Trailblazer - posted in Chevy ... it had been serviced before for the same thing in 2003 or 2004! ... replace the camshaft actuator solenoid, change the engine oil and .... The extended war. co. prob. would not be to happy since they already fixed the sensor once or twice already.

Replace a Camshaft Position Actuator Solenoid Valve on a ...

? 8:05
https://www.youtube.com/watch?v=4Dkdd287AKg

Jan 11, 2016 | 2004 GMC Canyon

2 Answers

Where is the camshaft position sensor located at on a 97 nissan pathfinder?


That sensor is an integrated part of distributor, not serviceable, According to my automotive database.

Nov 28, 2015 | 1997 Nissan Pathfinder

1 Answer

Were is the camshaft position is located


Hi Vernon,I looked up the pathfinder with the 4.0 and it didn't show anything,so I looked up the Frontier and it has the same 4.0 as yours,here's a link to where your sensor is,just enlarge to see better. Repair Guides Component Locations 4 0l vq40de V6 Engine AutoZone com

Feb 24, 2014 | 2005 Nissan Pathfinder

1 Answer

Location changing instructions cabin filter 2003 pathfinder


For nissan pathfinder cabin air filter replacing procedure with diagrams:---
Click the link below:---

http://repairhelpcenter.blogspot.com/2012/12/2003-nissan-pathfinder-cabin-air-filter.html


------
These will help.
Thanks.

Dec 17, 2012 | 2003 Nissan Pathfinder

1 Answer

Locate camshaft position sener


It is located beside the front pulley on the camshaft. It may be behind timing covers.

Nov 13, 2012 | 2000 Nissan Pathfinder

1 Answer

2003 vibe will not start


Do you know what Camshaft Actuator System is ?
The standard compression pressure is 1,400 kPa (203 psi).
The camshaft position (CMP) actuator system enables the powertrain control module (PCM) to change camshaft timing while the engine is running. The CMP actuator assembly (5) varies camshaft position in response to directional changes in oil pressure. The CMP actuator solenoid valve controls the oil pressure that is applied to advance or retard the camshaft. Modifying camshaft timing under changing engine demand provides better balance between the following performance concerns:
• Engine power output
• Fuel economy
• Lower tailpipe emissions
The CMP actuator solenoid valve (3) is controlled by the PCM. The crankshaft position (CKP) sensor (4) and the CMP sensor (1) are used to monitor changes in camshaft position. The PCM uses information from the following sensors in order to calculate the desired camshaft position:
• The engine coolant temperature (ECT) sensor
• The mass air flow (MAF) sensor
• The throttle position (TP) sensor
• The vehicle speed sensor (VSS)

This mite be something to look at , Is cam timing advanced or retarded . The ) CMP Actuator Assembly !

Mar 22, 2017 | 2003 Pontiac Vibe

1 Answer

Where is the crankshaft and camshaft sensor located?


Here's some pics of my 2003 Altima Crankshaft Sensor. Often mistaken by the Camshaft Sensor because both are identical sensors. They are each located in different locations. I've seen diagrams with the WRONG labeling. Again, this is so confusing for even a mechanic to understand because both sensors carry the same part number which is rare. http://x.nissanhelp.com/forums/members/digitaldxing-albums-2003-nissan-altima-crankshaft-position-sensor-picture331-2003-nissan-altima-crankshaft-position-sensor.html

Oct 07, 2010 | 2003 Nissan Altima

1 Answer

Where is a sensor for the camshaft position for a nissan pathfinders 6 cil 1997


The camshaft position sensor is located inside the distributor

Feb 19, 2010 | 1997 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

77544 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...