Question about 2000 Buick LeSabre

Open Question

Lower intake torque specs 2000 buick lesabre 3800

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 14 Answers

SOURCE: how do you remove the

If I Remember Correctly, Those Have A Black Plastic Plenum On Top Of Alluminum Intake. Just Remove All Wiring Hooked To Area Of Consern, Remove Fuel Lines From Fuel Rail, Remove Fuel Rail, Remove All Bolts From Plenum, Drain Coolant, And Remove Intake. Just Remember, It's Not As Hard As It Looks. It's Just Nuts And Bolts. Remove Anything That You See Can Stop You From Removing What You Need. Good Luck

Posted on May 03, 2009

Ad
  • 1 Answer

SOURCE: 2000 buick lesabre 3800 has

I had same problem on 2000 Lesabre blowing cold on passenger and warm on driver. I fixed it by adding more freon even though it had 28 pounds of preasure. Now it works great!

Posted on May 22, 2009

  • 61 Answers

SOURCE: Need the 2000 Buick LeSabre rear wheel Hub nut torque spec.

Those are not nuts, they are bolts. The torque spec for those bolts is 52ft.lbs

Posted on Jul 24, 2009

arauzvictor1
  • 466 Answers

SOURCE: 2000 buick LeSabre 3800 serpentine belt diagram

Ok sent you a diagram of the belt I hope to serve you Thanks and good luck90dd5bb.jpg

Posted on Jan 17, 2010

  • 3 Answers

SOURCE: what are the torque specs for the intake manifold

the torque spec's require you to tightened to 10 ft lbs and then tighten another 30 degress which will give you about 12 to 15 ft lbs of torque. make sure that you start in the middle and work your way out when tightening manifold because it will crack easily.

Posted on May 02, 2010

Testimonial: "Thank You!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What are the torque specs of a 2000 Buick Lesabre front and rear valve cover gaskets?


Valve covers usually don't have a torque spec. Just snug the bolts up and then give it about a quarter turn.

Aug 24, 2017 | Buick Cars & Trucks

2 Answers

Intake manifold torque specs 2000 olds silhoutte 3.4


Follow the link for a complete listing of this engines bolt torque specs. Torque Specs Database

Jan 25, 2017 | 2000 Oldsmobile Silhouette

1 Answer

2001 buick century torque prints for haeds on up


the 3100 specs
Type: Bolt Dim: Length: Head: Hexagon Grade: 37 Ft-Lbs 444 In-Lbs 50.17 N-m Connects: Cylinder Head To Engine Block Years: 1998-2001 Vote Record: Vote Note: 3100 - Head Bolts - 2 Steps: 37FtLbs; +90deg
12 Ft-Lbs 144 In-Lbs 16.27 N-m Connects: Exhaust Manifold To Cylinder Head Years: All Vote Record: Vote Note: 3100 - Exhaust Manifold to Cylinder Head
Type: Bolt Dim: Length: Head: Hexagon Grade: 9.58 Ft-Lbs 115 In-Lbs 13 N-m Connects: Intake Manifold To Cylinder Head Years: All Vote Record: 0/1(0%) Note: 3100 - Lower Bolts - 2 Steps: 5 FtLbs; 9.58 FtLbs Here are the head bolt torques for a 3.8
37 Ft-Lbs 444 In-Lbs 50.17 N-m Connects: Cylinder Head To Engine Block Years: 1999-2005 Vote Record: Vote Note: 3800 II - 2 Steps: 37FtLbs; +120deg
13 Ft-Lbs 156 In-Lbs 17.63 N-m Connects: Exhaust Manifold To Cylinder Head Years: 1999-2005 Vote Record: Vote Note: 3800 II - Exhaust Manifold to Cylinder Head - NOT FRONT 2
7.42 Ft-Lbs 89 In-Lbs 10.06 N-m Connects: Fuel Rail To Intake Manifold Years: All Vote Record: Vote Note: 3800 II - Fuel Rail Mounting Bolts 2.25 Ft-Lbs 27 In-Lbs 3.05 N-m Connects: Idle Air Control Valve To Throttle Body Years: All Vote Record: Vote Note: 3800 II - Idle Air Control Valve to Throttle Body Type: Bolt Dim: Length: Head: Nut Grade: 11 Ft-Lbs 132 In-Lbs 14.92 N-m Connects: Intake Manifold To Cylinder Head Years: All Vote Record: Vote Note: 3800 II - Intake Manifold to Cylinder Head Bolts/Nuts
7.42 Ft-Lbs 89 In-Lbs 10.06 N-m Connects: Intake Manifold Plenum To Intake Manifold Years: All Vote Record: Vote Note: 3800 II - Intake Manifold (Upper) to Lower Manifold Type: Bolt Dim: Length: Head: Hexagon Grade: 14 Ft-Lbs 168 In-Lbs 18.98 N-m Connects: Knock Sensor To Cylinder Head Years: All Vote Record: Vote Note: 3800 II - Knock Sensor

Jul 24, 2016 | 2001 Buick Century

1 Answer

Torque intakechartand sequence


Create an account on autozone.com. They offer repair manuals on their site once you have set up an account with them. It is free and has most Chilton manuals online. That is where I get my tourque specs most of the time. Worked for my 03 regal when I did the lower intake.

May 16, 2013 | 2004 Buick LeSabre

1 Answer

I need the tork spec on 1998 Buick 3800 block for the cylinder head.


hope this helps,

Torque sequence --------- front ' 6 1 3 7 ' of ' ' engine ' 8 4 2 5 ' --------- Step 1: torque bolts in sequence to 37 Ft/Lbs Step 2: torque all bolts in sequence an additional 120 degrees Step 3: torque bolts 1,2,3, & 4 an additional 30 degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.
always torque from center
Tighten each bolt an additional 90° in sequence.


0996b43f8021ae77.jpg

Jun 18, 2011 | 1998 Buick LeSabre

1 Answer

Oil leaks common on 2000 3800 v6 buick regal ls


Intake manifold and oil pan gaskets.

Jan 17, 2010 | 2000 Buick LeSabre

1 Answer

Need the 2000 Buick LeSabre rear wheel Hub nut torque spec.


Those are not nuts, they are bolts. The torque spec for those bolts is 52ft.lbs

Jul 12, 2009 | 2000 Buick LeSabre

1 Answer

Can't find the pcv valve on a 2000 Buick LeSabre.


assume this is a 3800,pcv is on pass side of plastic intake manifold,small plastic locking collar has an arrow on it ,says pcv

Mar 01, 2009 | 2000 Buick LeSabre

Not finding what you are looking for?
2000 Buick LeSabre Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...