Question about 1992 Audi 100

Open Question

1993 audi serpentine belt install - 1992 Audi 100

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

michigan man
  • 3533 Answers

SOURCE: serpentin belt diagram

for the most part there is a diagram under the hood showing you how to install your drive belt but give these website a try www.autozone.com if they have your car listed you be able to get picture as well as diagram showing you how to repair your car here is the other one its www.alldatatadiy.com and i hope i have been able to help you Michigan Man.

Posted on May 16, 2009

co7196
  • 3433 Answers

SOURCE: replace belt serpentine audi a8 2006

relatively easy. just weave the belt over, under and around the pulleys the way its show on the belt patter on the label on the radiator., or make note before pukking off old one. Good luck. Watch the fingers!

Posted on Jun 08, 2009

abauto
  • 353 Answers

SOURCE: serpentine belt diagram for 1996 audi a4 quattro

Ribbed Belt: Service and Repair
Ribbed Belt, Removing and Installing
Ribbed belt, removing and installing
CAUTION: Mark the direction of belt travel before removing, using a crayon or marker. Reinstalling a used belt in the opposite direction
could damage the belt
Note:
There are two different types of ribbed belt, identified as versions A and B.
Ribbed belt versions, identifying, refer to Application and ID
Removing
Old version A
- Remove ribbed belt guard.

4f56130.jpg
- Loosen ribbed belt tensioner using 15 mm wrench and drift 3204.
- Remove ribbed belt.

New version B
52631fe.jpg
- Using 10 mm hex socket wrench, turn downward in direction of arrow to loosen ribbed belt.
Installing
Install in reverse order of removal, noting the following:
- Place ribbed belt over drive pulleys and idler roller first, and onto tensioning roller last.
- Remove drift 3204.
- Install ribbed belt guard.

Posted on Oct 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My audi a5 wont run it starts and cuts out since i fitted a new serpentine belt


How long does it run? Sure you only changed the serpentine belt? The car would actual even run without the serpentine (or also called accessory belt) since the belt only drives fairly non essential components (AC compressor, alternator, fan, power steering pump. etc).

Mar 27, 2016 | 2010 Audi A5

1 Answer

1993 jeep grand cherokee larado serpentine belt install?


look at how belt is wrapped around pulleys&then lift on tension and remove belt

Aug 18, 2012 | 1993 Jeep Grand Cherokee

1 Answer

How to change serpentine belt on 1993 Olds Cutlass Ciera V6 motor


Click on the following direct Link. It has the Serpentine Belt Diagrams that you will need for your specific engine size and options (AC/No AC...etc).

Standard Rules to Removal the Serpentine Belt with a Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating it\moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.

Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1993/make/oldsmobile/model/cutlass_ciera/1993_oldsmobile_cutlass_ciera_drive_belt_routing_diagram.htm

Mar 22, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

1993 Audi 90 2.8L SFI 6cylSERPINTINE BELT ROUTING


Below is a diagram for your serpentine belt. Please post back with a rating and thank you for using Fixya.
Greg

8e3726c.jpg

Sep 03, 2009 | 1995 Audi 90

1 Answer

Serpentin belt diagram


for the most part there is a diagram under the hood showing you how to install your drive belt but give these website a try www.autozone.com if they have your car listed you be able to get picture as well as diagram showing you how to repair your car here is the other one its www.alldatatadiy.com and i hope i have been able to help you Michigan Man.

May 16, 2009 | 2001 Audi A6

1 Answer

Serpentine belt


You can buy the 1993 AUDI 90 CD from Bently Publishing for about $99.  I have it and I've used it.  It has diagrams and instructions.
Erik

Nov 29, 2008 | 1993 Audi 90

1 Answer

Audi timing belt


It's a complicated job, and usually takes about 8 hours to do the full service if you're familiar with the car's mechanicals, you have a good array of tools (air tools help a lot), you're familiar with what you're doing, and with how to disassemble everything (including removing the front of the car - I'm not joking). There's more to the job than just the belt too - you need to replace the timing belt, timing tensioner, water pump, thermostat, serpentine belt, and serpentine tensioner. If your cam seals are leaking (which is also known to happen), you'd need those and plan for a couple more hours as well, due to the care that must be taken not to scratch or score the cam end caps.

Aug 27, 2008 | 1999 Audi A6

2 Answers

Audi A6 How do I replace Serptine Belt?


In response to BiTurboA6 comment, there is a full write-up at http://www.scribd.com/doc/12127197/2001-Audi-A6-Alternator-Replacement-Instructions  

Jul 30, 2008 | 2000 Audi A6

Not finding what you are looking for?
1992 Audi 100 Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14333 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...