Question about 1996 Ford Explorer
Dash light not working
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Start the car
put in " N"
turn the 4X4 switch on
Then put in gear..
What do you see now?
Do the same in reverse when you take out of 4X4
Posted on Jan 19, 2009
the rear one is a single sensor and is located in the top of the rear differential , unplug it and take the retaining bolt out and it pops straight up out of the differential. the front has 1 for each wheel,and is located on the backside of the wheel hub. take the tire off and look on back side of hub it should be the only sensor thare and is anchored with one bolt then just fallow the wire to its disconnect point. this vehicle is known to have problems with the rear sensor so i would replace it first and see if this fixes the problem
Posted on Feb 02, 2009
You might have cut a wire or it could have broken or disconnected. Try tracing the wiring where you hooked up the trailer you may find one broken or disconnected.
Posted on Mar 26, 2009
The headlamp switch will cause the lamps to turn off. The switch heats up and turns the headlamps off. It will cool down and work for about 10 minutes and cut out,
Posted on Oct 08, 2009
Tips for a great answer:
Dec 20, 2015 | 2004 Ford Explorer
Mar 25, 2015 | 1996 Ford Explorer
Jul 19, 2012 | 1996 Ford Explorer
Mar 15, 2011 | 1996 Ford Explorer
Feb 10, 2010 | 1996 Ford Explorer
Jul 04, 2008 | 1996 Ford Explorer
Dec 11, 2016 | 1996 Ford Explorer
84 people viewed this question
Usually answered in minutes!