Question about 1995 Chevrolet Tahoe
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Firing order is 1-6-5-4-3-2 cyls. # 1-3-5 on drivers side front to back and cyls. # 2-4-6 passenger side front to back.
Posted on Nov 30, 2008
The firing order is 1-8-4-3-6-5-7-2.
The distributor rotates in a clockwise direction. The engine must be on the compression stroke on the #1 cylinder. Line up the timing marks. Remove the cap and the rotor should be pointing to approximately the 5 o'clock position.
Posted on Mar 06, 2009
Remove the valve cover on the driver's side and turn the engine over by hand until you see the intake open on #1 cylinder. and then close followed by the exhaust valve starting to open. #1 is front driver's side.Back up a little and set the crank timimg mark on 0 on the degree marker. That should be TDC. Put the rotor button on the distributor and set it roughly at the 3 o'clock position and put it in. As it meshes with the cam gear it will turn and once fully seated should be at 5 o'clock. that is the position of #1 plug wire. If it's not at 5 o'clock pull it out and turn the rotor button slightly to catch a new tooth and reinsert. DO NOT force the distributor into position. Wiggle and push,turn the rotor slightly and it will go into place. Patience is the key here and make sure it is fully seated on the intake. Once it is in place the firing order is1-8-4-3-6-5-7-2 and the distributor runs clockwise. Odd cylinder's are on the driver's side and even on the passenger's.
You may have to adjust the distributor a little one way or the other to get the engine to fire. That's normal. Once you get it running you can set the timing with your light. If you have no light then advance the distributor until it start's to sputter and do the same in ******. Then set your timing in the middle of that space, that will get you close. Hope this helps.
Posted on Oct 06, 2009
Testimonial: "you are a life saver thanks for the information"
Depends on what thermostat you put in. Stock is a 190*. Which will usally run about 200-210. That's where most all small blocks are happy.
Posted on Nov 09, 2009
Tips for a great answer:
Jan 06, 2016 | GMC Cars & Trucks
Feb 02, 2015 | Cars & Trucks
Feb 27, 2013 | 1998 Chevrolet Tahoe
Mar 06, 2011 | Pontiac Firebird Cars & Trucks
Aug 30, 2010 | Chevrolet Tahoe Cars & Trucks
Jan 17, 2010 | 1999 Chevrolet Tahoe
Feb 18, 2009 | 1995 Chevrolet Silverado 2500
Jul 29, 2008 | 1992 Chevrolet K1500
277 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: