- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
P1509 Dodge - Leak Detection Pump Switch or Mechanical Fault
P1298 Dodge - Air/Fuel Ratio Lean Under Wide Open Throttle Condition
- Plugged air filter
- Plugged fuel filter
- Defective fuel pump
- Ignition system weak-misfires
- Defective coil
P0118 Dodge - Engine Coolant Temperature Sensor Circuit High
- Low engine coolant level
- Faulty Engine Coolant Temperature (ECT) sensor
- Faulty engine coolant thermostat
- Engine Coolant Temperature (ECT) sensor harness is open or shorted
- Engine Coolant Temperature (ECT) sensor electrical circuit poor connection
P0113 Dodge - Intake Air Temperature Sensor 1 Circuit High
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
P0523 means the Oil pressure voltage to high. Your Oil pressure sensor may need to be replaced.
P1682 means your charging system is to low. Your voltage regulator may be going bad or the whole alternator.
p1693 means a Diagnostic trouble code (DTC) has been detected in the ECM or PCM which is related to the above DTC P0XXX codes.
Good luck and hope this helps. Keep me posted, be glad to help
12 is problem with the battery connection or the battery was disconnected within the last 50 ignition key on cycles 22 is the coolant sensor voltage too high or too low 55 means there are no more fault codes