Question about Cars & Trucks
I was driving the car the other day and all of a sudden the cluctch gave way with no sign what so ever it was in second gear when it went and i couldnt change gear from there it just stuck. could this be the slave cylinder or is it the clutch? either way what am i looking at for replacements? and how hard of a job is it?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
work it back and forth with your hand and you will get pedal after a while then bleed like you would brakes get help so one can pump and the other can bleed
Posted on May 24, 2009
Slave cylinder should be on the left side of the bellhousing (follow the line from the clutch master if necessary) If you don't see fluid but you have lost some, also check where the rod from the pedal goes through the firewall to the master...they often leak there and will not drip on the ground.
Posted on May 30, 2009
sounds like you have a air pocket or you fail to engage the slave cylinder push rod If you disconnected the slave cylinder from the hose proceed to bleed out the slave cylinder if you didn't take you slave cylinder and whit out disconnecting the hose and make sure the push rod is against the clutch push arm.
Posted on Jun 13, 2009
You will have to replace the rubber and the piston like mechanism to get this done. If you found an assembly replacement for the entire clutch slave, the better. The leaks may be caused by faulty rubber or valve on the piston but this can be caused by the linings of the cylinder becoming rough due to wear and tear.
Posted on Aug 20, 2009
these are notorius for clutch bleeding problems, there is no good answer other than to keep pumping that pedal, eventually it will bleed out
Posted on Dec 06, 2009
Tips for a great answer:
Feb 17, 2016 | Ford Cars & Trucks
Aug 14, 2015 | 2001 Toyota Camry
Dec 22, 2013 | 2000 Jeep Wrangler
Dec 12, 2013 | Cars & Trucks
Dec 02, 2017 | 1996 Honda Accord
Jan 10, 2010 | 1989 Jeep Wrangler
Aug 28, 2009 | 1997 Chevrolet Cavalier
Jul 10, 2009 | 1996 Nissan Maxima
44 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: