Question about 2003 Chevrolet TrailBlazer

1 Answer

Rear Window Wiper isn't working

My rear window wiper isn't working, do you know if there is a fuse that needs to be replaced, and where it is located. My husband cannot find it in the book that was given to us when we bought the car. He said that I have two fuse boxes, but he doesn't know which fuse or fuse box he should be looking at. Any Ideas?

Posted by on

  • snappyjude Jan 11, 2009

    My husband is going to look again - Thanks.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,118 Answers

If you look under cover for fuses it should tell you witch fuse is for what. there will be coresponding numbers. for all electrical components that are fused. under hood or inside car.

Posted on Jan 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear window wiper not working


Fuses are placed behind cover at lower left side of dash board.
Fuse for rear window wiper is no.3

Dec 03, 2012 | 1998 Honda CR-V

1 Answer

Rear window wiper not working


could be a few things so here goes
rear window wiper relay rear window wiper fuse motor or the connections are loose or rusted get these checked first hope this helps ivan

Sep 26, 2012 | Nissan Cars & Trucks

1 Answer

1997 Rear window wiper stopped working and unsure if there is a fuse to check before taking the truck to dealership. Where would the fuse located for rear window wiper?


Yes there will be a fuse and the fuse must be in the main fuse box. The position of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To ease your search the wiper fuse, it should be around 15 to 20 amps.

Feb 06, 2011 | Chevrolet Blazer Cars & Trucks

1 Answer

Is there a seperate fuse for a 2007 toyota rav4 rear window wiper and where is it? The wiper stopped working.


There are three fuse boxes (or fuse blocks) on the '07 RAV4--two in the engine compartment and the other by the driver's left knee. I'm sure there's a fuse for the wiper. Unfortunately it's likely to be on the UNDERSIDE of the interior fuse block. You'll need a mirror to locate the fuses since even if you get your head under there the fuses are too close to see (unless you're incredibly near-sighted).
My rear window wiper has operated intermittently since nearly the day I bought it. The dealer says to replace the motor for $400+. I just live with its craziness. There's probably a short or loose connection, but I haven't found it yet.

Jan 03, 2011 | 2007 Toyota RAV4

1 Answer

Why won't my Windshield wiper on back window stop? I need to know which fuse would operate the back window windshield wiper.


the rear wiper fuse locate at the interior fuse panel, #5 15A, if the fuse is ok, check the circuit braker 4.5 A,

Jul 24, 2010 | 1992 Ford Explorer

2 Answers

Which fuse is for the rear window wiper and rear window defogger on 2003 Toyota 4Runner (V6)?


You Have one fuse for the wipers in the car. Left side of steering wheel and the back cover should list the fuses and location. The other box is located in the engine compartment above the battery. They should list the fuse locations under the compartment covering the fuses. Hope that helps

Jun 14, 2010 | 2003 Toyota 4Runner

1 Answer

Rear window wiper doesn't work.


Check 12 V supply. turn rear wiper switch on and test wiring to the rear wiper motor. If no voltage check fuse. If voltage, replace wiper motor.

Apr 11, 2009 | 1991 Jeep Wrangler

2 Answers

Rear wiper stopped working


my 2004 expedition had same problem, if you take apart the shaft that goes thru the glass it will be full of dirt, clean ,lubricate and reinstall, you may have to replace the O-ring on the shaft. a 20 minute job, very easy fix

Feb 25, 2009 | 2004 Ford Expedition

1 Answer

99 Nissan Quest real wiper runs continually when ignition is on


Principles of Operation
Operation of the windshield wiper and washer is controlled by the front wiper/washer amplifier assembly. The front wiper/washer amplifier input comes from the multifunction switch by means of a voltage divider circuit. A constant voltage is applied to the multifunction switch by the front wiper/washer amplifier. When the multifunction switch is moved into the LO, HI, or intermittent position, the voltage is directed through a series of resistors. This results in various voltages being returned to the module for each switch position. The module then grounds the appropriate circuit, based on the voltage signal received back from the multifunction switch. This causes the wipers to run intermittently, or at the appropriate speed. Voltage is supplied to the wiper motor by the CJB fuse F46 (20A).
When the multifunction switch wash button is depressed, it bypasses all of the resistors returning a full voltage signal to the module. The module then grounds the appropriate circuits to operate the windshield washer pump for as long as the switch is depressed. The windshield wiper speed is dependent on the position of the windshield wiper/washer switch.
Voltage for the windshield washer pump is also provided by CJB fuse F46 (20A).
Operation of the rear wiper and washer is controlled by the rear wiper/washer switch.
Voltage is supplied to the rear window wiper motor by the fuse junction panel fuse F44 (10A).
The rear window wiper motor ground is made or broken by the rear wiper/washer switch. When the rear wiper/washer switch is moved into the WIPER position, it grounds the rear window wiper motor circuit, causing the rear window wiper motor to run once every 10-15 seconds.
Voltage to the rear washer pump motor is also supplied by the CJB fuse F44 (10A). The rear washer pump is directly controlled by the rear wiper/washer switch which makes or breaks the ground for the washer pump motor, depending upon its position.
If the vehicle is equipped with a movable liftgate glass, a liftgate glass switch is utilized to prevent rear window wiper operation when the liftgate glass is open. This same switch also causes the rear window wiper to drop down approximately three inches when the liftgate glass latch is released.
------------------------------------------------------------------------------------------
  • The wipers stay on continuously — rear wiper
  • Circuit.
  • Rear wiper/washer switch.
  • GO to Pinpoint Test L .


---------------------------------------------------------------------------------------------
Measure the resistance between rear wiper/washer switch C288 pin 6, component side and rear wiper/washer switch C288 pin 2, component side.
  • Is the resistance less than 5 ohms with the switch depressed, and greater than 10,000 ohms with it released?
sxv~us~en~file=arrow.gif~gen~ref.gifYes GO to L2 .
sxv~us~en~file=arrow.gif~gen~ref.gifNo INSTALL a new rear wiper/washer switch. TEST the system for normal operation.

Measure the resistance between rear wiper/washer switch C288 pin 6, circuit WB08 (BU/YE), harness side and ground.
  • Is the resistance greater than 10,000 ohms?
sxv~us~en~file=arrow.gif~gen~ref.gifYes INSTALL a new rear wiper /washer switch. TEST the system for normal operation.
sxv~us~en~file=arrow.gif~gen~ref.gifNo REPAIR circuit WB08 (BU/YE). TEST the system for normal operation.

65501dd.gif 7e9d21a.gif

Dec 08, 2008 | 1999 Nissan Quest

Not finding what you are looking for?
2003 Chevrolet TrailBlazer Logo

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...