Question about Cars & Trucks

Open Question

My Vermeer LM 35 stop working I replace fuel pump and starter but it's not working

Posted by Anonymous on

2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 8 Answers

SOURCE: Replaced the fuel pump and

I feel, your pain...I have changed everthing I know to change and my 89 f150 6 cylinder just looks at will turn over, even getting fuel coming out the schrader valve thing where the fuel come into the engine. At a loss. If I find the solution, will let you know...if you find it please post and let me know. Good luck!

Posted on Sep 04, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why did gas gauge suddenly stop working?

It says The fuel level sensor is integral with the fuel pump module. Which means you will have to replace the fuel pump,here's how to do. GET 35 GIFT CARD FOR EVERY 100 SPENT ON ONLINE SHIP TO HOME ORDERS Here's another link on relieving the fuel pressure and the start of the job. GET 35 GIFT CARD FOR EVERY 100 SPENT ON ONLINE SHIP TO HOME ORDERS Here's a link to a new pump. Fuel Pump at AutoZone com Best Fuel Pump Products for Cars Trucks SUVS Here's how to drain gas tank. Fuel Pump at AutoZone com Best Fuel Pump Products for Cars Trucks SUVS Here's how to remove gas tank. GET 35 GIFT CARD FOR EVERY 100 SPENT ON ONLINE SHIP TO HOME ORDERS

Jan 22, 2016 | 2004 Cadillac CTS

1 Answer

60 horse Work Master New Holland wont start blead lines but looses fuel to filter seems like hand pump dont work will run if you spray ether then dies when you stop spraying it. Can someone help

Earl You have to be able to bleed all of the air out of the fuel filter and lines for your engine to run. If the fuel is leaking back to the tank there is a problem with the valves in the hand primer pump.You might have to replace the pump. Remove or loosen the bleed screw on the top of the filter and pump out all of the air so there is no more bubbles then loosen the fuel lines at the injectors and turn the engine over with the starter to bleed the lines. Only crank over with the starter for 30 seconds per try and give the starter time to cool down

Oct 31, 2015 | Cars & Trucks

3 Answers

Here's one for the books. 2000 Jaguar S Type 4.0 Sport - no fuel pressure past fuel pump. Checked inertia switch, fuel pump fuses and relay - all good. Installed new fuel filter, fuel pump was shot -...

check if the input side of the fuel pump has a restriction . a perished rubber hose can be a problem , the pump should be able reach a pressure 35 psi + and a flow of a quart every 30 seconds at this pressure.

May 16, 2011 | 2000 Jaguar S-Type

1 Answer

Jumped the fuel pump. to see if it works(it works) fuel flow to the injetors. but the car would not start. sprayed starter fuild into intake, starts, soon as i stop cuts off? XJ12 jag 1994

replace the oil pressure sensor which also has a wire to the circuit to prime the fuel pump upon starting. once the oil pressure is acheived the fuel pump relay takes over

Mar 31, 2011 | Jeep Amc Cars & Trucks

2 Answers

1966 Mustang I6 starting problem

Sounds like the fuel pump, clogged fuel filter, or a stuck needle and seat in the carburator.

May 02, 2010 | 1966 Ford Mustang

2 Answers

I own a 1987 ford 150. Here is my problem I can start it when it's cold, but when she warms up the fuel injectors stop pumping gas and she shuts off. You can tell it's not getting gas.


Thanks for using FixYa. Check that the battery cable connections are clean. Check for 12 volts to starter solenoid with the key in the start position. These things should be checked first then the ignition switch, starter and starter solenoid. Also check the fuel pressure which should be between 28-35 psi. If it’s low check fuel filter or fuel pump and if high then check the fuel pressure regulator. Check the valve on the fuel rail and make sure you aren't getting fuel. To check this let someone to crank the key while you depress the plunger in the middle of the valve with a small screwdriver. If it sprays fuel, pumps are working fine. Also check the pickup coil in the distributor. If it's not fine then it will get fuel to the rail but not the injectors. Please replace whichever has gone bad.

Please do accept the solution if the issue is resolved or else revert for further assistance.


Apr 11, 2010 | 1987 Ford F 150

4 Answers

Car cut off and will not start

Since spraying starting fluid in the car it runs, tells you that the problem is fuel related. You need to check the fuel system step by step completely. It seems you have done some of the checks already, but you don't say weather you checked if you get fuel on both sides of the fuel filter. If you only get fuel on the inlet side and not the outlet, your fuel filter is clogged, so replace it and recheck. If no fuel on either side and you say the fuel pump works check the fuel pump relay. Don't just replace the computer before all checks are made the relay, fuse and grounds, etc. This can be tiresome but can also save alot of money if you check system and don't skip steps you'll find your problem.

Sep 07, 2009 | 1991 Oldsmobile 88

1 Answer

Fuel pump

replace the fuel pump relay. if no help you will most likley need a new fuel pump.

Jan 22, 2009 | 1997 Infiniti.5 J30

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides