Question about Mercury Mountaineer

Open Question

How to remove fan clutch from water pump 2002 mercury mountaineer

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 11 Answers

SOURCE: Remove Fan clutch from water pump? Left or right hand threads?

left

Posted on Jun 19, 2008

Ad
  • 46 Answers

SOURCE: water pump replacement

Get a wrench that fits on the fan clutch. Most auto part stores will have a fan clutch removal tool.

It works the best if you put the wrench onto the fan clutch and then hit it with a hammer in the dirction to take the clutch off. Sometimes it might take multiple tries to break the clutch loose.

Posted on Aug 29, 2008

  • 599 Answers

SOURCE: Water Pump Replacement

it is pressed onto water pump..will not come off when you remove fan clutch

Posted on Dec 05, 2008

  • 83 Answers

SOURCE: 2002 Yukon water pump replacement

try hitting clutch fan nut three times with bar and hammer and use adjustable wench to turn other wise you will need two tools can borrow from dealer of a parts shop one to wold water pump pully other to turn clutch nut.

Posted on Jan 03, 2009

emissionwiz
  • 76070 Answers

SOURCE: 2002 mercury mountaineer 4.0 starter relay location

The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
The starter relay is in position #56 of that box.

Posted on Mar 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove water pump on 2002 mercury mountaineer


You have to start with removing battery neg cable then start pulling fan shroud and fan clutch and then most of the time the radiator has to come out and anything else in front of the water pump. Dont forget to drain radiator into something big enough to hold all the fluid. The thermostat should be replace at the same time

Dec 04, 2015 | Mercury Cars & Trucks

1 Answer

Remove fan from water pump


You need to loosen the fan shroud and then remove the blade from the fan clutch.

Mar 29, 2014 | 2003 Mercury Mountaineer

1 Answer

My water pump is blown in my 2002 mercury mountaineer. Where is the water pump located? And is the engine sideways?


No the engine is not sideways.
The water pump is behind the fan and pulley in the middle.

Aug 27, 2013 | Cars & Trucks

1 Answer

Take the fan off the water pump


remove the 4 bolts holding the fan to the water pump it will come off

Sep 02, 2012 | 1997 Mercury Mountaineer

1 Answer

I have a 2002 Mercury Mountaineer v8 and I want to know why when I am on the interstate at 60 mph or higher, my truck starts to roar.


Does it "roar" all the time? It could be the fan clutch engaging and the radiator fan spinning at full speed. Watch the temp gauge and the RPM's when it does this..the RPM's should stay the same and the temp gauge should go down. I would also check your coolant level as low coolant cause the engine to run hotter and at highway speed the water will circulate faster making the fan clutch engage due to the extra heat.

Jul 12, 2011 | 2002 Mercury Mountaineer

1 Answer

Replacing water pump, how doers the fan come off the pump shaft. It looks like it's screwed on with a large hex nut but how can I loosen it without the shaft turning. Frustrated


The fan clutch is threaded onto the water pump. They make a tool to hold the pulley from turning so you can turn the large hex part of the clutch. You can probably rent one for free from a parts store like autozone or the like. Keep in mind some clutches are left hand threads also keeping the belt on the pulley also helps the pulley from spinning also.
3f8a89a.jpg

Aug 14, 2010 | 1998 Mercury Mountaineer

1 Answer

2002 mercury moutaineer leaking water from a bag on the top of the engine


If you have a water leak in the front of the engine and drips pr the crankcase is almost certain to be the water pump. Thanks

May 10, 2010 | 2002 Mercury Mountaineer

1 Answer

Is it necessary to remove the thermostat housing in order to replace a water pump bypass hose? Mechanic advises that my 2000 Mountaineer's small by-pass hose is leaking. In order to replace it, either the...


in the upper radiator hose to the engine side of an elbow with 2 screws in there is the thermostat and water pump need to remove the fan belt clucht with the fan off the bottom hose that goes from the radiator to the pump to remove the screws remove the pump the pump clean the surface and install the new pump

Aug 07, 2009 | 2000 Mercury Mountaineer

2 Answers

1998 Mercury Mountaineer Plastic Fan


yes this sounds correct but if you want to get a diagram and step by step instructions try "autozone.com"

Mar 08, 2009 | 1998 Mercury Mountaineer

1 Answer

How to remove the fan from an 04 mountaineer


This has a thread on fan clutch that you will need a spanner wrench for.

Dec 13, 2008 | 2004 Mercury Mountaineer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

fordexpert

Level 3 Expert

5520 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...