Question about 2006 Chrysler PT Cruiser
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Take it in & have it scanned, may only be a faulty solenoid or even brake switch may cause code & symptoms. Sooner you get it in, the cheaper it will probably be to repair it
Posted on Sep 08, 2009
my old amns cruiser has the same problem i'm putting it down to loss of turbo pressure as the inlet manifold is leaking when reved
i'll let you know when manifold is replaced if it cures it
Posted on Sep 09, 2009
I had a similar problem with my car. It turned out the O2 sensors were fine and the issue was a leak in the throttle body causing the engine to run lean. If you have an ODB2 scanner you can look at fuel trims, etc and will be able to tell.
Posted on Mar 28, 2010
GET A 3 SPOKE PULLEY EXTRACTOR AND SCREW IN THE BOLT BUT IN THE CRANKSHAFT HOLE PUT A MUCH SMALLER SCEW SO YOU WOUNT MESS THE INSIDE UP
Posted on May 26, 2010
Tips for a great answer:
Jan 27, 2017 | 2001 Chrysler PT Cruiser
Jun 20, 2015 | 2007 Chrysler PT Cruiser Base
Sep 08, 2010 | 2006 Chrysler PT Cruiser
Aug 24, 2010 | 2004 Chrysler PT Cruiser
Sep 28, 2009 | 2002 Chrysler PT Cruiser
Sep 18, 2009 | 2005 Chrysler PT Cruiser
Sep 08, 2009 | 2002 Chrysler PT Cruiser
Mar 01, 2009 | 2006 Chrysler PT Cruiser
Mar 14, 2017 | 2006 Chrysler PT Cruiser
81 people viewed this question
Usually answered in minutes!