TB42 FLYWHEEL TORQUE SETTING - Maxima Nissan Cars & Trucks

The torque specifications for the flywheel on a Nissan Tiida 1.5 litre can vary depending on the exact model and engine type. I would recommend consulting the factory service manual for your specific vehicle to find the correct torque specifications.

However, as a general guide, the flywheel bolt should be tightened to a torque specification of around 50-60 ft-lbs (67.9-81 Nm) using a torque wrench. It is important to check the service manual for the specific torque for your flywheel and make sure the bolts are tightened in the correct sequence and pattern.

Question edited for clarity, add MAKER!
Question moved to maker category.

BMW Flywheel Bolts = 100Nm or 74 ft-lbs of torque.
Sep 3, 2020

How To Replace The Clutch, Flywheel, & Rear Main Seal On ...

https://blog.fcpeuro.com > how-to-replace-the-clutch-flyw...

E90 N46 320i flywheel bolt tension? - BIMMERPOST.com

https://www.e90post.com > forums > showthread
Jun 23, 2017 - Note bolts needs to be replaced with new. Bentley manual says originals are stretching bolts, and replacement ones will be self locking type.
Torque setting confusion (DMF/clutch/gearbox) - Bimmerpost
Jul 30, 2018
Torque specs for flywheel? - BMW 3-Series (E90 E92) Forum
Jan 1, 2015
Clutch Job - BMW 3-Series (E90 E92) Forum - Bimmerpost
Jul 7, 2018
Torque Specs Thread - BMW 3-Series (E90 E92) Forum
Sep 3, 2017
More results from www.e90post.com

Flywheel torque specs? - E46 Fanatics Forum

https://www.e46fanatics.com > ... > E46 > E46 General
Jan 30, 2022 - 105Nm per tis. 77.4 lb/ft. Daily driver build thread. Like.
Approximate Head bolt torque
Oct 16, 2013
DIY: Yet another Torque Guide (YATG)
May 20, 2020
HELP - Flywheel Install Torque Spec
Jun 26, 2010
Flywheel Torque Specs
May 20, 2017
More results from www.e46fanatics.com

Well here is a video of the TD42: https://youtu.be/aSN5V3uDD7c
I couldn't find much of any information on the TB42, but when i looked up the parts for it like the camshaft and cam gear- the parts didn't seem to cross over to a TD42. So i believe that there is a strong possibility that they are different. If you have a TB42, maybe you could compare that to the video and see if you see any differences.

there are 2 sets of torque specs for flywheel bolts as there are 2 different fly wheels in use with different bolts for each
go google and type in--torque specifications for nissan navara flywheel bolts and fins a site relevant to you application
it could be 61-69 ft/lbs a or 90 ft lbs depending on the flywheel and the vehicle 2wd or 4wd

go google and type in - torque settings for (your engine as you haven't given that infomation) and there will be pages of details
There is no flywheel for an automatic. What you have is a flex plate as the torque converter acts as a flywheel

does anyone know the specs for vw transporter t4 2.0l ACC petrol flywheel torque and clutch pressure plate. thanks.

VW Transporter 2.5 TDI-PD, (made year: 2003 ... 2007), engine code: AXD, 130 HP / 3500 rpm.
Important note: use new bolts!
Flywheel/driveplate torque setting: 60 Nm + 90 degrees.
Clutch to flywheel torque setting: 22 Nm.

cyl head torqes.1st stage 29 nm. 2 nd stage 57-67 nm. 3rd stage slacken off 360 cegrees, 4th stage 29 nm. 5th stage 64-74 nm. intake and exhaust valve clearance .38 mm hot setting. hope it goes ok.

Check with your local auto parts store. Or buy a repair manual