Question about 2010 Jeep Patriot

Open Question

Front turn signal bulb replace jeep patriot - 2010 Jeep Patriot

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: how to change bulbs on front and rear turn signals

open the hatch there should be two screws that hold on the lense, twist the bulb holders and remove

Posted on Sep 18, 2008

  • 475 Answers

SOURCE: Replace front turn signal bulb on a 1998 Jeep Grand Cherokee

first remave the headlamp and then remove the marker lamp assy.

Posted on Oct 31, 2008

  • 15 Answers

SOURCE: Can't figure out how to change the bulb for turn signal on Jeep

I just changed both bulbs in my 1998 Grand Cherokee. These solutions made it possible, but i will offer some clarification and photos. First of all, all 4 screws are torx T20 as emoesmoe mentions, none are phillips. there are two bulbs that blink: the larger amber bulb is the turn signal light--dealer was cheaper than autozone and only had to purchase one bulb; the other bulb is called a side marker and it also blinks with a turn but stays on with the headlights. see photos that go along with the first two solutions. the first photo shows step one the first screw to take out. second and third photo are step two removing the second screw. the last photo shows the exposed screws to the turn signal housing after the uper light houseing has been removed:

Posted on Mar 12, 2009

  • 36 Answers

SOURCE: How do you change the 2007 Jeep Patriot turn

You might have to remove the headlamp assy to get to it.

Posted on Jul 07, 2009

  • 6826 Answers

SOURCE: 1989 jeep cherokee pioneer. Right hand side turn

The turn signal switch is bad,replace it to repair the problem.

Posted on Jul 05, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Pop off front lens jeep 2009 patriot

You guys are all very close but check this, on the Patriot you can't take the lens or housing out from the front. It has to be removed from the back. And in saying that, you don't have to remove the housing at all. The steps are as follows, #1) Remove the inner fender well cover. It's the black plastic covering that hides all the wiring and the engine compartment. There are 7 push screw retainers to remove and 3 philips screws. #2) Once the cover is removed, all you need do is reach your hand in behind the turn signal and twist the bulb and it's socket to the left to remove from the housing. #3) Now that you have the light and socket out, you are just left with pulling out the red clip on the socket and pinching the black tab while you pull out the bulb. It's just that simple. Now if your housing is cracked or blemished and you have to completely remove it, then you will need to remove 3 torx bit screws that attach it to the front fender. They go in from the back of the housing. And yes, they are T20's. I don't necessarily call this dismantling the whole front end. But it's not a 5 mins job either.

Jun 28, 2013 | 2009 Jeep Patriot

1 Answer

When i turn on the right turn signal lamp on my 2007 jeep patriot the left signal lamp also comes on so it looks like the emergency/hazard lamps are on. doesn't happen every time and only for about a...

You will need to replace the turn signal switch, this involves removing the covers from the steering wheel column and disarmiong the Airbag system.

Feb 06, 2012 | 2007 Jeep Patriot Sport

2 Answers

What is the part number for a replacement bulb for a 1997 Jeep Grand Cherokee front turn signal? Front, not side!

The part # for your 1997 grand cherokee front turn signal bulb not the side is 3057, good day

Apr 14, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

When failed trun signal bulb, Jeep turning signal is fastly blinking. I changed rear turn signal bulb with LED bulb, but turn signal blinking speed doesn't go to normal, At first couple of seconds it is...

Try replacing with the same bulb type as was failed. Flasher unit isusually reliant on resistence from the bulbs to what speed that side will flash at when powered.Some of these led type have less resistence and that equates to a faster flash speed.That is why when one bulb blows that side will flash faster or may even stay on without flashing.You could even swap the led to the other side( to confirm.Check with the bulb retailer to whether they have those bulbs with a higher rated resistence in led.If this vehicle has leds as standard,you may need to get the correct type from dealer. Hope this helps or get back with findings if it still has fault after replacing bulb.

Mar 29, 2011 | 2009 Jeep Patriot

2 Answers

2008 Jeep Patriot Fuse Replacement

If it is just the left side the bulb is probably blown. fuses will take out both sides

Jun 14, 2010 | 2008 Jeep Liberty

1 Answer

Replace front turn signal bulb on a 1998 Jeep Grand Cherokee

first remave the headlamp and then remove the marker lamp assy.

Oct 30, 2008 | 1998 Jeep Cherokee

Not finding what you are looking for?
2010 Jeep Patriot Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides