Question about 2002 Land Rover Freelander

Open Question

I have a 2002 Land Rover Freelander and got these codes: p0341, p1160,p1470, p0455, p0102. what do that mean?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Landyman
  • 89 Answers

SOURCE: HOW TO CHANGE THE TIMING BELT ON A 2002 LAND ROVER FREELANDER

Engine ?

Posted on Nov 16, 2008

  • 1 Answer

SOURCE: land rover freelander 2002

i believe a special jig neccarry to align the cams. Associated parts and jig purchased as a kit possible. very expensive as jig alone is in $900 range. Just google to find i

Posted on Jan 09, 2009

bakulvy
  • 1 Answer

SOURCE: Fuel Filter in Freelander (replacing)

The fuel filter is located below the electrics box, half way between the battery and the bulkhead on the passenger side, under the bonnet. It is very difficult to see how it all fits, but it has a central screw which holds the plastic filter housing/mounting in place. Find this screw (which is a small self tapper) and be prepared to loose it, or use a magnetic screw driver. Then lift the plastic housing up and away, (towards the engine) be ready with loads of rags to catch the diesel fuel when you disconnect the pipes. There is an earth wire attached to the housing also. (anti interference, I think) It is quite a fiddle getting it back again, as it has two locating lugs on the back of the plastic housing/mounting.

Posted on May 07, 2009

  • 15 Answers

SOURCE: Radio Code Unlock?

If it's the original radio, then the landrover dealer will sort it, via the database. reg number, and vin number usually required. But check in the info wallet that should have come with your car, it's usually stored in there, on a security card.

Posted on Jul 07, 2009

noranda21
  • 1547 Answers

SOURCE: Problem with the 2004 Land Rover FreeLander How

Tools you will need:
1. Panel removal tool
2. Philips screw driver
3. 1/4 Ratchet with extension and 8 mm socket.
4. grease to lube new regulator. The first thing, is to remove the door panel:
1. Remove 2 screws securing hand rail to door.
2. Remove screw securing door handle escutcheon to door and remove the escutcheon.
3. Remove 4 screws securing pocket to door.
4. Carefully release 10 clips securing trim casing to door. (Best to use a door panel removal tool, the plastic clips break very easy)
5. Disconnect multi-plug from upper door speaker. Do the same for lower speaker
6. Remove trim panel from door.
7. Remove the plastic vapor barrier , care full not to destroy. (You may have to cut around some things such as the hand rail brackets.)
At this point you will be able to see the regulator and motor through the small holes in the door. At this stage a small flash light is very handy
to see such things as the power connector for the window motor.

1. Loosen the two bolts in the slotted holes, shown above.
2. Remove the remaining 4 bolts securing regulator assembly to door.
3. Lower glass and loosen the 2 bolts securing door glass to regulator. Then slide the channel bar forward to remove.
4. Disconnect the power from the window motor.
5. lift the window and secure in the up position ( I used Duct tape).
6. Collapse all the arms and maneuver the old regulator out the center hole in door. Assembly is basically the reverse of the removal procedures:
1. take the two screws that you partially removed out of the old regulator and install them partially install them into the new regulator.
2. Work the new regulator through the center hole.
3. Connect the power to the regulator motor.
4. Lower the window glass, take the channel that secures the glass to the regulator, insert it over the tow bolts that were loosened in step 2 above
5. Raise the window and secure.
6. Insert the 2 bolts on regulator through the keyed holes in the door and finger tighten.
7. line up the rest of the bolt holes and install the remaining two bolts in both the regulator and then tighten two bolts in step 6 above
8. install the two in the bottom channel.
9. Now is a good time to test..........
Then all that is left to install the hook up the speaker(s) and mount the door panel.
1. Position trim panel close to the door and connect door speaker(s) multi-plug(s).
2. Secure door panel to door with clips.
3. insert escutcheon to door handle and secure with screw.
4. Secure hand rail to door with two screws.noranda21_0.jpg
5. Fit pocket to door and secure with four screws."

Posted on Dec 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset timing marks after replacing a broken timing belt?


Land Rover Freelander 2002-2005 KV6 Timming belt and ...

? 4:31
https://www.youtube.com/watch?v=sz_oe9tIFH4
Jul 3, 2011 - Uploaded by Jaime Depaula
Land Rover Freelander 2002-2005 KV6 Timming belt andreplacing valves - Video 2 ... shops in North Eastern USA for bent valves and timing belt change? .... Land Rover 200tdiTiming Belt -From Broken Belt to Retiming the ...

ROVER K Series Cambelt Change Video - YouTube

? 10:52
https://www.youtube.com/watch?v=1Qn8ljQKZxA
May 4, 2012 - Uploaded by metalworker007
How to change a rover K series cam belt .. by Technozen of ...soy espa?ol porfavor quiero saber timing marks de MG ROVER 25 petrol 1795cc engen .... Hi, Have a Land Rover Freelander1999 petrol serie K, that dont start, ...

Freelander 1.8i timing belt - Land Rover Technical Archive - LR4x4 ...

forums.lr4x4.com > ... > Tech Archive > Land Rover Technical Archive

Nov 20, 2006 - 1 post - ‎1 author
The following is instructions for replacing the timing (or camshaft) belt on the 1.8i petrol engine, as fitted to a Freelander. This is the K-series ... With the timing set, thecam sprocket marks should look like this. Posted Image

How to Replace timing belt on Land Rover Freelander 2.5 ...




Dec 10, 2015 | 2002 Land Rover Freelander

1 Answer

I have a 2002 Land Rover Freelander that is stuck in Park. The stop light switch has been replaced with an autozone part, but it still does not work. The break lights are also not working.


This might help you. Otherwise, just find a mechanic you trust and have him or her check the brake light bulbs. It could also be fuse problems. Check the diagram for your lights or check your manual. http://forums.edmunds.com/discussion/5166/land-rover/freelander/freelander-transmission-problems

For your fuse box diagram:
http://carwiringdiagram.net/2002-land-rover-freelander-fuse-box-diagram/

May 31, 2015 | 2002 Land Rover Freelander

1 Answer

I hav a land rover freeland wifh 4 DTC code P1160,P1472, P1477, P1471 what do they mean Help DANNY3761@GMAIL.COM


all these codes have got to do with the in take man variable intake butterfly electrical fault also got variable induction

Apr 14, 2014 | Land Rover Freelander Cars & Trucks

1 Answer

UPPER AND LOWER SUSPENSION BALL-JOINT


Need reliable Land Rover Freelander parts? ... The Land Rover Freelander was introduced to the market as a premium ... Land Rover Replacement Antenna ... www.carpartswholesale.com/cpw/land_rover~freelander~parts.html www.carpartswholesale.com/cpw/land_rover~freelander~parts.html
I have just gone into this site. They seem to have everything you could possibley need for yr Land rover - hope your are successful

Jan 30, 2012 | 2002 Land Rover Freelander

1 Answer

How can i find a security code of 2000 land rover freelander for audio system?


How can i disable the security code of 2000 landrover freelander

Dec 09, 2010 | 2002 Land Rover Freelander

1 Answer

1470 and 1775 keeps coming up on the dtc. what do that mean?


hi.. Code P1470, Variable Intake manifold Bank 2 valve always closed. " Engine".
Code P1775 , TCM Toeque down request to ECM has failed. " Transmission

I hope this help on your question...
Thank you for use fixya...

Oct 16, 2010 | 2004 Land Rover FreeLander

Not finding what you are looking for?
2002 Land Rover Freelander Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...