Question about 2007 Pontiac Grand Prix
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
as you face the engine the thermostat bell is on the right (drivers side) Follow the radiatoe hose. Remove the two bolts and raise the bell still attatched to the hose. the thermostat is there with the rubber seal. You can gently pry the thermostat out with a screwdriver or something similar. Put in new thermostat be sure it is the same as the old one, and then replace or change the seal (be sure it is the smae size and thickness as the old one as I got the wrong size from Napa) Then replace the bell, and tighten, but not over tighten. I hope this helps!
Posted on Jan 31, 2009
this trans is the 4T65E. It needs a 4th clutch hub. The splines strip off around 120k or more because they weren't hardened from the factory. The new ones have the hardened splines. The trans needs to come out and be partially torn down. I've fixed alot of these. Change the EPC solenoid while you are there. They wear and hang up causing intermittent harsh shifts
You can drive them forever without changing the hub but you'll never have 4th gear
Posted on Apr 02, 2009
It's under the hood, on the driver's side, under a square, black box with a lightning symbol on it. Loosen the flower-shaped screw that holds the lid of the box down, remove the lid, flip it upside down and when you look at the inside of the lid, you'll see a map of all your car's fuses. There's also a fuse diagram on the very end of the dash, but it's accessible only when you open the driver's side door. When you're driving, that end of the dash is blocked by the closed door.
Posted on Jul 01, 2009
P0102 is a MAF SENSOR CODE (MASS AIR FLOW)
i could guess and say replace the MAF sensor
there is an 23 step diagnostic procedure for this code
Posted on Apr 13, 2010
Tips for a great answer:
Jul 07, 2015 | Pontiac Cars & Trucks
Nov 05, 2014 | 2007 Pontiac Grand Prix
Jul 25, 2011 | 1999 Pontiac Grand Am GT
Mar 14, 2011 | 2007 Pontiac Grand Prix GXP Sedan
Mar 01, 2011 | 2004 Pontiac Grand Prix
May 12, 2010 | 1999 Pontiac Grand Prix
Jun 28, 2009 | 2000 Pontiac Grand Am GT
318 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: