Question about 2004 Jeep Wrangler

3 Answers

Fan works on hi only

Heat and ac both work just fan only works on hi

Posted by on

  • Anonymous Jan 27, 2009

    I have a 2004 Rubicon and I have the same problem!

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Rheostat (rotary switch) is faulty. Take it apart, and clean with electrical contact degreaser, or pencil eraser and re-try.

Posted on Jan 11, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

It is the Fan resistor. Pretty easy to replace and not to bad on the pocket.

Posted on Feb 16, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 328 Answers

The blower motor resistor is probably shot. i believe it is under the dash on the passenger side behind the glove box
hope this helps!

Posted on Jan 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ac fan not working, ac is cold but fan won't blow air into cab...


check the fan itself to see if it works. check the heater fuse first! if all is ok, you probably have a bad heater fan resistor. to check blower, please go here on pc for info on blower. .cargurus.com/Cars/Discussion-t16272_ds569146

May 21, 2014 | Cars & Trucks

2 Answers

Hyundai Elantra temperature goes up to HI when air is turned on


There is an electric fan that should come on with the AC and run whenever the AC is on,if it doesn't come on it will heat up very quickly. Sounds like a problem with that radiator mounted fan.
The fan is supposed to come on when the engine gets hot enough also.
If so, the AC should be ok at hiway speeds.But you need the fan to work.

Jul 17, 2013 | Hyundai Motor 2003 Elantra

2 Answers

Heating/ac fan isn`t working on my 2006 trailblazer


Did you check in the fuse box in thje engine compartment?

Dec 06, 2012 | 2006 Chevrolet Trailblazer

1 Answer

Hi, the air conditioning in my '93 dodge shadow isn't working. The blower fan works and the heat works. But no a/c.


Look to make sure both ac fuse and relay are good and have good connection, then start the car and turn ac on any change? if not you probably don't have any Freon due to a leak in the lines attached to your ac.

Jun 30, 2011 | 1993 Dodge Shadow

2 Answers

AC/heating fans don't work


The relay center is under the hood, there should be several with the same #'s switch one that you know is working in place of the fan relay, if fans turn on replace relay. It is faster to turn on ac after switching relays for diagnostics as fan should run as long as ac is on...

Dec 10, 2009 | 2004 Honda Accord

1 Answer

Fan quit on 87 celebrity, heat ac, etc.. fuse ok ????


Hi
Check for bad connection at heater resistor or try tapping heater motor lightly
with ignition switch on and heater switch on. Could be heater switch connection.

Apr 01, 2009 | 1987 Chevrolet Celebrity

1 Answer

Aircon wont switch on when motor is running. Fan not working either.


If your fan is not working, the AC is prevented from coming on. This is a safety so the evaporator (cooling heat exchanger) does not ice over.

Fix the fan problem, and the AC will work.

If the fan does not work at any speeds (lo, med, Hi). Then you have a blown fuse or wire disconnect.

If the fan works on HI only, then your blower resistor is shot. This is a common failure and can be replaced at your dealer or by yourself if you are handy.

Mar 06, 2009 | 2007 Jeep Liberty Sport

1 Answer

Fan for ac/heat does not work in front


It's the blowe motor resistor real common

Nov 03, 2008 | 2006 GMC Envoy Xl

2 Answers

Car problems


Hi,

In my country, most overheating issues on Volkswagen models are resolved by:
  • entirely removing the thermostat (not applicable in cold regions);
  • wiring the fan to switch on once the engine is running (with or without the A/C or heater being turned on);
  • replacing the radiator thermal switch for the fan to a lower temp.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Aug 14, 2008 | 2001 Volkswagen Jetta TDI

Not finding what you are looking for?
2004 Jeep Wrangler Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...