Question about Cars & Trucks

Open Question

2006 avalanche the stabilitrak light comes on and grinding noise on take off every time but all goes normal within 20 feet or so

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 1998 Jimmy Grinding noise

Just had the same problem left front wheel bearing was gone in mine hope this helps should get it looked at rite away front wheel will seize and cause a lot of other damage

Posted on Mar 17, 2009

Ad
  • 1 Answer

SOURCE: service stabilitrak comes on when its cold

I have a 1999 intrepid hat stalls out when i am driving mostly when driving slow would that be a crank position sensor?If not what could it be

Posted on Dec 07, 2009

  • 212 Answers

SOURCE: why does stabilitrak light come on saying service

It's telling you your stabilitrak system is not functioning properly. Sensors in system are failing and setting service light. You need a GM dealer to diagnose system.

Posted on Feb 06, 2010

  • 226 Answers

SOURCE: I have a chevorlet trailblazer 2008. Every so

sounds like a bad speed sensor somewhere. Have the dealer look 2008 should be under warranty

Posted on Feb 25, 2010

bluebirdmate
  • 1190 Answers

SOURCE: The stabilitrak light comes on my 2006 Trailblazer

Hello: To determine the cause for the light coming on, you will have to have the system codes read to determine, then diagnose the condition so you can repair it.

Posted on Jan 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Traction control problem


Grinding noises when making turns in front wheel drive cars usually is constant velocity joints.

Mar 04, 2016 | Cars & Trucks

1 Answer

What is making my stabilitrak light staying on


StabiliTrak service light - Chevy TrailBlazer, TrailBlazer SS and ...

forums.trailvoy.com > ... > 02-09 General Tech Q&A > General

Dec 24, 2009 - 11 posts - ‎7 authors
However, the StabiliTrak system seems to be working, as in my area ... If you have OnStar push the button when the Service Stabilitrak light is on have them run a diagnostic. ... 2007 Chevy TrailBlazer LS .... Choose your make. Service Stabilitrak light comes on
11 posts
Mar 31, 2011
Service Stabilitrak
11 posts
Mar 27, 2011
very strange thing happend/ traction control light ...
8 posts
Sep 2, 2010
Abs and traction control light
11 posts
Sep 20, 2009
More results from forums.trailvoy.com

Feb 09, 2016 | 2007 Chevrolet Trailblazer 4.2

1 Answer

What does it mean when stabilitrak and abs light comes on. Once this happen a few minutes later when I brake it makes a grinding noise.


Same as with ALL vehicle problems---
when you have a check engine light on

You stop using it
Check for OBD Codes
Diagnose your codes
Component test-- to find a problem
Make the repair

With or without codes-- you can Google
ABS Braking Systems,Trac Control & many other
abs add-ons-- to learn about them

What about reading your owners manual !!

Fail to see how using a vehicle with
brakes grinding, would be safe

Brakes have to come apart once a year
when you have no problems

Aug 13, 2014 | Cars & Trucks

1 Answer

Noise coming from front end and ABS/Stabilitrak errors


sounds like your abs ring on the axle has come loose

Dec 04, 2012 | 2009 GMC Sierra 1500

4 Answers

My service stabletrack keeps come on how to fix that


Hi there:

Your vehicle is equipped with StabiliTrak, which combines antilock brake, traction and stability control systems and helps the driver maintain directional control of the vehicle in most driving conditions.
Traction control activates when the controller senses wheel spin. StabiliTrak will selectively apply the brakes and reduce engine torque to help regain traction.


Stability control activates when the controller senses a discrepancy between your intended path and the direction the vehicle is travelling. StabiliTrak selectively applies braking pressure at any one of the vehicle's brakes to help guide the vehicle in the direction which you are steering.


When you first start your vehicle and begin to drive away, the system performs several diagnostic checks to insure there are no problems. You may hear or feel the system working. This is normal and does not mean there is a problem with your vehicle. If driving conditions delay system initialization, the STABILITRAK NOT READY message may be displayed. If this is the case, your vehicle does not need servicing.


When the StabiliTrak system is both on and actively controlling the stability of the vehicle, the StabiliTrak light will blink for the duration of the event.


You may also feel or hear the system working. This is normal.
StabiliTrak will turn off automatically if a problem is detected in the system. The StabiliTrak light will come on and SERVICE STABILITRAK will be displayed on the DIC. For vehicles without a DIC, the StabiliTrak light and the StabiliTrak service light will both come on. If the SERVICE STABILITRAK message (or StabiliTrak service light) does not clear itself after restarting the vehicle, you should see your dealer for service.


Hope this helps.

Jun 03, 2012 | 2006 Chevrolet Blazer

1 Answer

2003 Avalanche drivers door window has grinding noise and wont go up, does the regulator need replaced or what?


Yes, it sounds like the regulator is at fault. The grinding noise sounds like a stripped gear. You will have to pull the inner door panel off to investigate.

May 26, 2012 | 2003 Chevrolet Avalanche

1 Answer

THis morning I noticed 2 triangles, car inside with swiggly lines but the left side triangle had a spanner next to it outside. I drove for about 20 miles, stopped to purchase something then when I...


{: ) The two triangles you saw is for the StabilTtrak system,, sometimes called the traction control indicator. When you see a spanner beside it, it means the system needs servicing.
StabiliTrak will turn off automatically if a problem is detected in the system. For vehicles without a DIC, the StabiliTrak light and the StabiliTrak service light will both come on. If the StabiliTrak service light does not clear itself after restarting the vehicle, you should see your dealer for service.

Feb 23, 2011 | 2006 Chevrolet Trailblazer

1 Answer

I have a wrench with a car swerving light up every once in awhile but I have no idea what it means and I have no idea what stabilitrak is


{: ) A car swerving light on the instrument cluster is the StabiTrak indicator, sometimes called the traction control indicator. A wrench beside it tells it requires servicing.

Your vehicle is equipped with StabiliTrak, which combines antilock brake, traction and stability control systems and helps the driver maintain directional control of the vehicle in most driving conditions.
Traction control activates when the controller senses wheel spin. StabiliTrak will selectively apply the brakes and reduce engine torque to help regain traction.
Stability control activates when the controller senses a discrepancy between your intended path and the direction the vehicle is travelling. StabiliTrak selectively applies braking pressure at any one of the vehicle's brakes to help guide the vehicle in the direction which you are steering.
When you first start your vehicle and begin to drive away, the system performs several diagnostic checks to insure there are no problems. You may hear or feel the system working. This is normal and does not mean there is a problem with your vehicle. If driving conditions delay system initialization, the STABILITRAK NOT READY message may be displayed. If this is the case, your vehicle does not need servicing.
When the StabiliTrak system is both on and actively controlling the stability of the vehicle, the StabiliTrak light will blink for the duration of the event.
You may also feel or hear the system working. This is normal.
StabiliTrak will turn off automatically if a problem is detected in the system. The StabiliTrak light will come on and SERVICE STABILITRAK will be displayed on the DIC. For vehicles without a DIC, the StabiliTrak light and the StabiliTrak service light will both come on. If the SERVICE STABILITRAK message (or StabiliTrak service light) does not clear itself after restarting the vehicle, you should see your dealer for service.

Jan 25, 2011 | 2006 Chevrolet Trailblazer

2 Answers

2006 Chevy Trailblazer LS, dashboard lights, need a key of warning lights, one is a wrench with a car next to it and a squiggly line underneath, the other one looks like a car skidding in a triangle.


Change Engine Oil Light = wrench with a car next to it
StabiliTrak® Service Light =
car skidding in a triangle.
This light will come on if a problem is detected in the StabiliTrak® system

Sep 06, 2009 | 2006 Chevrolet Trailblazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...