Question about Peugeot 505

Open Question

206 1.4 petrol alternator belt replacement

Drive Belt replacement

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
c17hydro
  • 2984 Answers

SOURCE: mazda 626 ( 1997, 2.0 petrol ) alternator belt diagram

Dumb question, but, did you happen to the diagram on the underside of the hood, the strut tower towards sides of the motor or on the radiator support.

Posted on Mar 13, 2009

Ad
  • 1 Answer

SOURCE: 1998 chevy cavalier Alternator Drive Belt diagram

Check out this link... better than a diagram, a photo.

http://www.automotiveforums.com/vbulletin/showthread.php?t=309192

note: on my screen this guy's "purple" circle looks more like a light blue, maybe lavender.

Posted on Jun 27, 2009

  • 1 Answer

SOURCE: alternator drive belt squealing

yeh, mine did the same thing with a hydralic belt. it was the bearings. mazda capellas use a lot of 6202 bearings which, luckily, are fairly cheap, and are commonly used in pool pumps. so you can find them at pool pump repair stores. although pool pumps use 6202 2RSR bearings. these are just the water proof type, but are excactly the same size and can be used.
to test if it is a bearing problem, remove the belt and try to twist the individual wheels by hand, you should be able to turn the 2 smaller ones.
from memory the alternator belt is in a fairly in accessable postition so the belt is going to be hard to put back on.try other things first, like wiping the inner side of the belt with a dry cloth to remove moisture.
worst case senario is your alternator has, or is starting to, seize up and you need to replace it.

Posted on Jul 11, 2009

jebild
  • 178 Answers

SOURCE: need diagram on alternator belt replacement on a

If the same as my '94 cyl then you tighten the belt by loosening the bolt that the alternator pivots on and the bolt that tightens the alternator to it's adjustment bracket. For my truck this is neither fun nor easy. The a/c and power steering belts having idler pulleys with adjustments on them making them MUCH easier to deal with.

Posted on Jun 03, 2010

Danniboi
  • 1098 Answers

SOURCE: timing belt diagrams for the peugeot 206

Hi
you are better off looking here http://www.honestjohn.co.uk for europen cars, ask o there as I found it to be quite useful for this type of question.

Regards
Dan

Posted on Jul 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why alternator belt making noise specially when engine is cold?(on 206 1.4)


noisy alternator belts generally indicate out of tension limits or old and cracked and in need of replacement. Inspect the belt and check for cracks ,frayed edges and loose. As the belt heats up it tends to grip better but the problems will still, be there.

Oct 31, 2014 | Peugeot 206 Cars & Trucks

1 Answer

How to replace alternator belt for 1991 geo prizm


replace alternator belt.you need to loosen alternator upper and lower belt then push alternator forward to slip off drive belt.if you have the prizim GSI. you need to raise and support the vechicle safely.remove the power steering and air conditioning drive belts.then loosen the lower mounting bolt and nut from the alternator bracket.then remove the alternator drive belt.

Dec 28, 2012 | 1990 Geo Prizm

2 Answers

85 chevy celebrity. replaced alternator. that one squealed 2. got another. still hear a squeel. does not squeel when belt is off.


ALTERNATOR BELT NEED ADJUSTING AND REPLACING IT GLAZED. WHEN DRIVE BELT GET GLAZED SHINY CAUSE IT TO SLIP AND SQUEAL.REPLACE ALTERNATOR DRIVE BELT. AND ADJUST IT DRIVE BELT TENSION BY TIGHTEN THE UNTIL YOU CAN PRESS DOWN ON THE BELT IN THE LONGEST RUN. YOU NEED TO PRESS DOWN BELT AND GET A 1/4 TO 1/2 INCH DEFLECTION IN BELT.THE BELT CANT BE TOO TIGHT WHERE WHEN YOU PRESS DOWN AT IT WONT GIVE IN NONE TOO TIGHT, WILL CAUSE PREMATURE ALTERNATOR BEARING FAILURE IF DRIVE BELT TOO TIGHT.

Apr 18, 2011 | Chevrolet Celebrity Cars & Trucks

3 Answers

Trying to change water pump..where is location..1999 trooper


behind timing cover, i believe it run by the timing belt. do timing belt when replacing waterpump, kind of a big job.

Oct 05, 2009 | 1999 Isuzu Trooper

2 Answers

Peugeot 206 GTi (Engine Squeeking Noise)


IF THIS IS NOT A SURPENTINE BELT,TRY THE P/S BELT TO SEE IF ITS LOOSE

Aug 20, 2009 | Peugeot 405 Cars & Trucks

1 Answer

How do I change the alternator in my vw polo p reg 97 1.4 petrol car.


7f88f79.gif
Alternator belt routing — all except VR6, with power steering, no A/C


  1. Disconnect the negative battery cable.
  2. Disconnect the wiring from the alternator. If necessary, mark the wires with tape or other means to ensure they are connected properly upon installation.
  3. Loosen the belt tension, and remove the drive belt from the alternator. On VR6 (AAA) engines only, remove the belt tensioner from the cylinder head.
  4. Remove the alternator adjustment bolt, followed by the pivot bolts.
  5. Carefully lift the alternator from the bracket. To install:
  6. Hold the alternator in position on the mounting bracket, and install the pivot bolt. On later engines with automatic belt tensioners, install the upper mounting bolt.
  7. Install (but do not tighten) the alternator adjustment bolt (earlier models only).
  8. Place the alternator drive belt on the pulley.
  9. Adjust belt tension and tighten the mounting and adjustment bolts as necessary.
  10. Connect the wiring to the alternator. If tape was used to identify the wires, make sure it is removed once the wires are connected.
  11. Connect the negative battery cable.

Jul 15, 2009 | 1997 Volkswagen Jetta

2 Answers

Peugeot 206 2001 GTI


Check the alternator belt for proper tension. Also check alternator voltage output. If output is low the rest of the systems can fail.

Jul 05, 2008 | Peugeot 405 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

mike hayward

Level 2 Expert

279 Answers

lloyd cole

Level 2 Expert

250 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...