Question about 2001 GMC Yukon XL

Open Question

How to remove transmission pan on a 2003 yukon xl

Wanting to replace the transmission filter and gasket, however I cannot remove the transmission pan because of the exhaust crossover. Is there a work around without having to remove the crossover

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: replace factory radio on 2002 yukon xl

all you gotta do is carfully pry the dash panel off (prying from the far left end is easiest) completely remove panel. then there are 2 clips that hold the factory sterio in place. push on the both clips while pulling the radio out. simply disconnect the wiring harness from the back of the radio. using an adapter avaliable at your local radio shop (scosche p/n gm02, mdarb and gm1483b) wiring harness, dash install kit, and antenna adapter. then simply match the colors on the new radio's harness to the adapter harness, crimping each connection with a "but plug". then simply follow the instructions included with the dash install kit to assemble the kit.connect the antenna adapter to radio, plug in all cables. test to see if everything works properly before the final install. install sterio into dash install kit, re installing kit where origional radio was. then simply put the panel back in its place by firmly pushing on it untill it snaps into place. then enjoy your new radio!

Posted on Jan 04, 2009

Ad
MrScary66613
  • 1990 Answers

SOURCE: Oil Pan Gasket Replacement - How to - GMC Yukon 2000

No big job Really. Just locate your Drain Plug for the Oil. Thepan is right there, Remove the Bolts around the Pan and Remove. You will lose all of your oil so, Have something there to catch it all. Clean it all around the Edges of the Block where the Pan mounts with Degreaser and Make sure that you Scrape the Old Gasket off of Both the Block and the Pan. Run a Thin Bead of Blue ATV Silicone around the Pan Edge, Lay the Gasket on top of this Silicone. Put another Thin line on top of the Gasket and Reinstall. This Silicone is High Temp Silicone and will Seal Very Well. Make sure to put oil Back in the Motor! Please Rate my Response, I need all the Help That I can Get! Thanks!

Posted on Jan 27, 2009

  • 416 Answers

SOURCE: how to remove spare tire on 2003 yukon XL

you need a tool that goes in a slot in the rear bunper

Posted on Jan 17, 2010

  • 1 Answer

SOURCE: How do I remove and replace the power side mirror

2003 GMC Yukon - My power mirrors stopped working.... all fuses have been checked and they are all good. Any ideas? These are the power folding mirrors. The function that allows you to fold them in for car washes etc still works.... they just will not adjust when you change drivers, or when you try to adjust them with the controls. Any ideas would be appreciated!

Posted on Mar 19, 2010

  • 2841 Answers

SOURCE: where to locate cabin air and heat filter for 2003

It does not have one. Starting in 2003 the cabin filter was no longer installed on your vehicle.

Posted on Jun 10, 2010

Testimonial: "THANK YOU cLAY FOR INFORMATION. GAIL"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

'03 Yukon Denali XL. Rpms go up to 3K at around


when you had the transmission filter and gasket changed. do you know if they back flushed the fluild. there is 5 to 7 shift soleniods in the transmission. when garages back flush transmission it causes the solenoids to close. are there any codes. sounds like your 1st and 2nd shift solenoid is stuck closed

Nov 28, 2012 | Cars & Trucks

1 Answer

How mutch should it cost to replace a right front pinion seal,transfer case seal(front and rear),water pump and a transmission pan gasket


You're going to have to shop around. Labor rates & parts prices vary from shop to shop and is dependent on who they choice to use for a parts supplier.

Mar 18, 2011 | 2003 GMC Yukon XL

1 Answer

I have a 2003 yukon Problem with the GMC Yukon XL


What size engine ? 4.3 L vortex P0300 random misfire code is usually associated with vacuum leaks , but could also be low fuel pressure , plugged fuel filter , fuel pump problem , clogged injectors etc... doing fuel pressure an flow testing would confirm or eliminate that as a problem . Fuel injector balance testing would confirm or eliminate clogged injectors .

Mar 24, 2017 | 2003 GMC Yukon XL

1 Answer

2003 Toy Tacoma transmission pan have a gasket


There is a gasket supplied when you buy the transmission filter for all transmissions that your vehicle would have came with. You don't want to be using that stuff on a transmission pan, as a replacement for a gasket. I would wonder if the filter was changed?

Mar 13, 2010 | 2003 Toyota Tacoma

1 Answer

Cant find transmission flter on my car to replace it


you have to remove the transmission fluid pan-it is not an external filter
first remove the transmission drain plug and then remove the pan-you can then remove the filter and transmission pan gasket

Feb 18, 2010 | 2003 Mitsubishi Outlander

2 Answers

Does my 2003 mitsubishi galant have a transmission filter if so where is it located


All automatic transmissions have a filter, which is located inside the transmission pan. To replace filter, you will need to remove the transmission pan. Before replacing pan be sure to remove any old gasket that may still be present on pan and the mount on transmission. Refill with proper type and amount of fluid...DO NOT OVERFILL

Feb 15, 2010 | 2003 Mitsubishi Galant

1 Answer

Where is the 2003 kia optima transmission filter at on the car


in the transmission pan, you have to remove the transmission pan to get to it. don't worry when you buy the transmission filter it should come with a trans pan gasket. hope this helps and god bless.

Feb 03, 2010 | 2003 Kia Optima

1 Answer

How do I replace the oil pan gasket on a 2001 GMC Yukon XL?


Changing the oil pan gasket on a GMC Yukon XL is realtively simple, but does require removal of the exhaust pipe. You will need a new oil pan gasket and a new exhaust pipe flange gasket.
Put the car on ramps or jacks to access the undercarriage.
Remove the exhaust pipe by removing the 3 nuts holding the exhaust pipe flange to the exhaust manifold. These nuts often rust and prior application of penetrating oil may be required to remove them without damage. Once the pipe is unbolted, work the exhaust system loose from the hanging brackets. In most cases the entire system does not have to be removed since there is enough room to remove the pan with only the front hangers removed.
Drain the oil from the engine
Remove the 10 mm bolts holding the pan to the block.
Remove the old gasket material and scrape any remaining gasket from the block and pan.
Install the new gasket. Forma-Gasket or a similar product may be used in small quantities to "glue" the new gasket in place and prevent shifting while the pan is reattached to the block.
Reinsall the 10 mm bolts in a cross pattern to ensure the gasket is compressed evenly. Do not overtighten the bolts.
Replace the pipe to flange gasket between the exhaust pipe and the exhaust manifold with a new part.
Reattach the exhuast pipe to the hangers.
Install the 3 bolts connecting the pipe flange to the exhaust manifold.
Fill the engine with oil.

Sep 15, 2009 | 2001 GMC Yukon

2 Answers

2003 Dodge Stratus


no drain plug, no car or truck has had a drain plug for decades, reason? they want the filter changed with the fluid, so they make you pull the trans pan to drain the fluid, one very messy job.

Feb 12, 2009 | 2003 Dodge Stratus

3 Answers

Oil Pan Gasket Replacement - How to - GMC Yukon 2000


No big job Really. Just locate your Drain Plug for the Oil. Thepan is right there, Remove the Bolts around the Pan and Remove. You will lose all of your oil so, Have something there to catch it all. Clean it all around the Edges of the Block where the Pan mounts with Degreaser and Make sure that you Scrape the Old Gasket off of Both the Block and the Pan. Run a Thin Bead of Blue ATV Silicone around the Pan Edge, Lay the Gasket on top of this Silicone. Put another Thin line on top of the Gasket and Reinstall. This Silicone is High Temp Silicone and will Seal Very Well. Make sure to put oil Back in the Motor! Please Rate my Response, I need all the Help That I can Get! Thanks!

Jan 27, 2009 | 2000 GMC Yukon

Not finding what you are looking for?
2001 GMC Yukon XL Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...