Question about 2002 Toyota Caldina

Open Question

I have a 2002 zt caldina , i disconected the batterie as alarm was playing up and now the car keeps cutting out and low revs

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

t_aforrester
  • 93 Answers

SOURCE: my toyota caldina won't idle

*** could be caused by an air leak in one of hoses that are part of the engine management system. They run everywhere so don't take them all off once but check each one in turn to see if it is cracked or broken.There is also the possibility that you simply need to increase the idle speed adjustment.
Regards

Posted on Feb 20, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 jaguar xj8 when I drive it won't go over 3000rpm


Jaguar wont rev 3000 rpm Questions & Answers - Fixya

www.fixya.com > Forum > Tags > wont rev 3000 rpm
1998 Jaguar XJ8 won't rev over 3000 rpm ... Wont go beyong 3000 Revs s type 2001, wont go beyond 3000 Revs and it' in limp ... Question about 2002 X-Type ... My jaguar xjr8 year 2000 battery went dead started car went for short drive back ...

Jaguar engine cuts 3000 rpm Questions & Answers - Fixya

www.fixya.com > Forum > Tags > engine cuts 3000 rpm
1998 Jaguar XJ8 won't rev over 3000 rpm ... engine cuts out and shudders at 3000 rpm won't accelerateobd code p0332 2002 jaguar x type 3.0 l P0332 - Knock ... Car is boging out in park and will not go over ... driving, don't worry about it.

Rev Won't go up

www.jaguarforum.com/showthread.php?t=14662

Dec 15, 2015 | Jaguar Cars & Trucks

1 Answer

Caldina zt


1az-fse engine p1653 scv fault .how to repair

Mar 31, 2014 | Toyota Corolla Cars & Trucks

1 Answer

My toyota caldina won't idle


*** could be caused by an air leak in one of hoses that are part of the engine management system. They run everywhere so don't take them all off once but check each one in turn to see if it is cracked or broken.There is also the possibility that you simply need to increase the idle speed adjustment.
Regards

Feb 20, 2012 | 2003 Toyota Caldina

1 Answer

My battery meter was reading low and i took the negative off the battery while the car was running and it cut right off


Alternator not putting out enough voltage or is shot, need to load test it to be shure, 'cause some cars don't keep running when you disconect battery and cut out. even if alt. is good.

Mar 02, 2010 | 2001 Mercury Mountaineer

2 Answers

1997 Toyota Caldina GT-T 3S-GTE


Hi there,
As you say the tacho/speedo come "back up to normal" after the incident, I assume that they either stop working or become erratic while the dash lights are misbehaving.
If so, this sounds like a dash wiring electrical problem.
The O/D OFF light is lit by the switch on the shifter (switch also inputs to the ECU). The ENGINE light is driven also from the ECU but the SLIP light is driven from the ABS/VSC computer, although these two computers do communicate.
Best plan of attack would be interrogate the ECU for error codes or ask a Toyota dealer to do so. At least you'll have some clue to any problems that the ECU's may have picked up.
Contact me about checking for ECU error codes if you want to attempt it yourself. Although the Caldina has an OBDC2 connector, as I understand it it's not 100% compliant, so you'll need a Toyota compatible reader. Fortunately teh codes are also output via the CHECK ENGINE light.
If there's no problems there, I'd be pulling the instrument cluster and checking for wiring problems. I'm not sure where in the world you are but most ex- JDM vehicles could have modified with timers, speed-cut or fuel-cut devices that either have been poorly installed or are playing up and causing electrical problems.

Aug 08, 2009 | 1997 Toyota Camry

1 Answer

I just a new battery today I brought it at auto zone and they placed in, so I guy at the store put it on a battery thing and put in new battery and car will not stay on keeps cutting off


needs a new alternator sounds like the way you can check the this is to start the car then disconect the battery if the car dies automaticly then you need a new alternator

Jun 06, 2009 | 2002 Toyota Camry

1 Answer

Alarm and imobiliser on a discovery 300tdi


before you cut or rewire the alarm, when welding the disco although disconecting the battery protects the battery, the imobiliser holds current, this my have gone into system factory setting, so it my be worth getting the imob and key re-conected, this is a cheap job at any Landrover specialist. hope your running smooth soon

Apr 27, 2009 | 1997 Land Rover Discovery

1 Answer

Cannot start engine after alarm sounded.


disconect the battery for about 15 minutes and turn the head lights on after bat is disconected and then turn head lights off reconect bat and this should reset your alarm system.

Apr 21, 2009 | 2002 Toyota Tacoma

Not finding what you are looking for?
2002 Toyota Caldina Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...