Question about 2004 Chevrolet Impala

Open Question

How to reset the service engine light on 2000 ford expedition

I've done all the services but dont know how to reset the service engine light

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 341 Answers

SOURCE: engine reset light on 2003 gmc envoy

The service engine light you refer to is telling you you have a problem with the computerrized engine control of the car.When the light comes the computer stores a numerical code that can be retrieved with a scan tool or code reader.If you are not experienced with diagnostics you need to take the car to a mechanic,because sometimes a code can fool you and you can change a good part.An example of this would be reading a code that the oxygen sensor is reading a lean condition setting the light on. but the real issue is a bad fuel pump not supplying enough fuel to the engine. On the code alone you would be inclined to change the sensor when it was not the problem.

Posted on Nov 26, 2008

  • 599 Answers

SOURCE: Service Engine Soon light

coolant temp sensor is on water outlet housing ..another on radiator for temp.... get a good code check and advise me/us..good luck

Posted on Dec 12, 2008

468 Chevelle
  • 81 Answers

SOURCE: Service engine code indicates EGR valve.

You could have a restriction in the egr ports. remove the valve. Plug the holes, start engine. 1 hole will be blowing out exhaust, the other will have large vacuum.

Posted on Mar 28, 2009

  • 7353 Answers

SOURCE: po452 trouble code changed sensor engine light

you may have to drive it several days for the light to go off, or have the codes cleared. personally I would just drive it. if the computer tests it, and it passes the test, it will go off on its own.

Posted on Sep 21, 2009

emissionwiz
  • 75797 Answers

SOURCE: reset 2003 trailblazer service engine light

is this the check engine yellow light?

Posted on Sep 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Recently had an oil change done. service engine light needs to be reset, don't know how to do it


You can try to disconnect your battery for about 5 minutes and that will usually reset the computer.

Sep 20, 2012 | 1999 Ford Taurus

2 Answers

What's your problem?2004 ford expedition service engine soon light


I assume you resolved the issues by now

Check lights have been on all vehicles for 31 years,
so you shouldn't be asking about them

Does not matter what light comes on your dash

The procedure is always the same
Check for codes
Diagnose & repair code related issues first

Aug 18, 2012 | 2004 Ford Expedition

1 Answer

I've been having a problem with my 2000


No.dont diconnect the negative or positive battery at all The alternator only produces 2 volts above battery voltage so a total of 14 volts. If you dont have a volt meter get a small screw driver be careful doing this if you can safely access the back of the alternator (without shorting anything out)in the midddle of the alternator will be magnetic. That will tell you its charging or better yet get a compass and put it at the battery positive terminal and it will swing that tell you its charging. You disconnect the negative the whole car shuts off you disconnect the positive the car stay running but produces high voltage and can damage the alternator itself

Mar 02, 2012 | 2000 Ford Expedition

1 Answer

My 2000 Ford Expedition XLT's check engine light


I'm probably not going to be able to give you a proper diagnosis without knowing which codes are setting the check engine light. There are about 300 problems that can set the light. Most common thing for your vehicle with not running bad is what they call the DPFE (differential pressure feedback) sensor. It's basically a vacuum/pressure monitor for the EGR system and they get stopped up or corrode as they have exhaust gases running through them and are made from aluminum or plastic. If you post code numbers (go to advance or autozone and they will read them for free) and I can give you a better idea of what the problem is.

Jun 19, 2011 | 2000 Ford Expedition

1 Answer

My 2000 ford expedition service engine light came on and the engine shut off and would not start


OK, you need to scan the computer for the codes stored on the computer. Then, try to determine what is wrong from the code(s).

Good luck to you.

Jun 29, 2010 | 2000 Ford Expedition

1 Answer

Diagram of spark plug


Check this for 4.6 or 5.4 sizes engine...

2004 Ford Expedition 4.6 liter V-8 VIN "W"

f4f4c2b.gif


2004 Ford Expedition 5.4 liter SOHC V-8 VIN "L"

a5901ea.gif

Hope this help (remember comment and rated this).

May 05, 2010 | 2004 Ford Expedition

1 Answer

How do you reset the service light on ford expedition


you need a scanner to reset service engine light but it will come back on until you fix the problem

Jan 21, 2010 | 1998 Ford Expedition

1 Answer

Hello i have 2000 ford expdition with srv engine light


i do agree with wrighton but you need to find out why the light is on so take to auto zone and they will put it on the tested for free cause i had that problem once on a 2000 ford expdition and it was the boot on the number 1 cylinder and it happen after i had done the tuneup.

Jan 17, 2009 | 2000 Ford Expedition

1 Answer

I have a 2000 ford expedition the problem i have is that in the morning when the truck is started the RPM gage is bouncing around. once i drive the truck and get to a traffic light and have foot on the...


first of all if you have over 60,000 miles the car is asking you for a tuneup but take it to auto zone and they will put it on the tested for free so you know what you are dealing with.

Jan 17, 2009 | 2000 Ford Expedition

1 Answer

Service engine light


Hello, Not being a Ford man myself but have reset many service interval lights, Try holding down either trip meter button or odometer reset whilst turning on the ignition. You may need to hold it down for 10/20 seconds. If unsure do what I've done in the past hold down all buttons on speedo face.
Good Luck and Happy New Year to you and your family!
Paul 'W'

Dec 31, 2008 | 2000 Ford Escort

Not finding what you are looking for?
2004 Chevrolet Impala Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...