a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, Easy way to get over this is run a cable from working fog light to none working fog light this should then work. Only other way must be the left fog light is not earthed properly run earth wire to the vehicles body. Please give feedback at firstname.lastname@example.org Thanks, Malcolm Campbell.
There is a recall on headlights for 2005 MINIS, but I also know that the front fog light issue is prevalent, so DOT (888) 327-4236 SHOULD BE NOTIFIED AND MINI USA at: 1 866-MINI USA. Are you asking how to replace the fog light? There are also manuals available for each car with detailed guides on maintenance so you can learn your own vehicle and do it yourself, or safeguard yourself from being overcharged by mechanics. I hope this helps somewhat for you!
Look here. A few people have had this issue and also have it relate to further issues. They are working towards a recall.
Your fog lights should not work with high beam... they should work with the low beams. they are connected wrong, which probably drew too much current through the light switch burning out the contact points for the parking lights in the switch
Start by Fixing the fog light connections to work with low beams. Appears to me this was not factory installed. Aftermarket kit maybe! Then see if your parking lights work. If parking lights don't work still and everything else works, replace the light switch $50 at the dealer. The switch works the fog lamps when you pull out the knob to turn on the fog lamps when the lights are turned on. When the fogs are on you will see a little amber light to let you know your fogs are on. When you switch to high beam the fog lamps go off. Again if its not working that way, then is wired wrong. Needless to say, there should be connectors in the harness of the lights for the fog lamps. Use those if possible with the kit that you can get at the dealer, or you can splice the connector with those blue splicing clips sold at the auto part store. Make sure ground is ground when splicing and water proof the connection sith silicone and tape.