Question about 2011 Buick Enclave

Open Question

Throttle position sensor 2008 buick enclave - 2011 Buick Enclave

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 3113 Answers

SOURCE: 95 buick starts for a few seconds then dies I have

Anti theift system problem?

Posted on Apr 08, 2009

  • 45 Answers

SOURCE: how to install throttle position sensor 94 buick

locate the throttle body and on the side match your new T.P.S sensor, its usually held on by 2 screws, torx kind, so you might have to buy that screw driver since it is not common. remove and disconnect the old one and install. if its adjustable you need to set it, with a voltmeter. if its not just make sure it engages and slides in fine.

Posted on Aug 04, 2009

  • 110 Answers


you must remove front bumper cover

Posted on May 10, 2010

  • 10 Answers

SOURCE: Key stuck in buick enclave in acc position.

if acc is the one before the starter then no as you have to turn the key in order to start sorry! but if it is lighting the dash up with battery and engine lights then u can short the rear of the ignition barrel by taking off the cowling {around ignition} then there should be wires soldered to the back of what we call the black [or white] box. once youve charged the battery you can cross the back wires using a screw driver, when you hear it turn over you can determine which is the live feed and cross with starter wire. failing this the best i can advise is removing cowling and taking black{or white} box off the back of the ignition barrel end and then you will be able to drive it until you get a new ignition barrel hope that helps

Posted on Jun 11, 2010

  • 1152 Answers

SOURCE: where is the battery in a 2008 buick enclave?

it may be under the back seat,,buick notorious with that..

Posted on Jan 20, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2012 Buick Enclave, dash reads Traction control off, service stabilitrak. Engine power reduced... why????

Engine power reduced... is the main problem ,this turned off Traction control off, service stabilitrak. Your vehicle has electronic throttle control , The Gas pedal has sensors inside which are connected by electrical circuits to the PCM - engine computer ,the PCM use's these inputs to control the throttle plate by use of a 12 volt DC motor . Plus there are position sensors on the throttle body for feed back to the PCM. When one of these signals is off The PCM will put the system into reduced power mode . This will also set DTC'S - diagnostic trouble codes . Your best bet , take it to a qualified repair shop.

Jul 12, 2017 | Buick Cars & Trucks

1 Answer

How do I change the output transmission speed sensor on a 2008 Buick Enclave?

Well.. first you might want to put the vehicle on jack stands... because that unit is on the bell housing of the transmission. And it's probably going to be up against the fire wall side of the vehicle...

Aug 29, 2016 | 2008 Buick Enclave

1 Answer

I have a code P0221,2009 Enclave looking for a good place to start.

code p0221 refers to throttle position sensorB/accelerator pedal position (APP) sensor B--range /performance problem====causes accelerator cable adjustment ( broken)--TP/APP sensor
It also refers tp throttle position switch B/ accelerator pedal position (APP) switch B-range/ performance problem===same cause as before.

Dec 10, 2014 | 2009 Buick Enclave

1 Answer

Fuel pressure regulator on a 2008 buick enclave

  • The regulator is usually mounted on the fuel rail in multiport EFI (Electronic Fuel Injector) applications, or the throttle body assembly in throttle body injection (TBI) applications.
    • Some fuel injector types require pressure regulator replacement as an assembly. There are repair kits available for other types
  • Sep 10, 2014 | 2008 Buick Enclave

    1 Answer

    Buick Enclave will occasionally at a stop rev up to between 2000-4000 rpm

    Three possible reasons for this are
    1. You have a vacuum leak
    2. The throttle position sensor (TPS) has gone bad
    3. The idle air control valve is bad or blocked up.

    May 01, 2014 | 2012 Buick Enclave Base 4dr SUV 3.6L V6...

    2 Answers

    2008 buick enclave passage door panel removal

    passege door removal on ur Buick Enclave can be tricker than it seems. i would suggest to consult a dealer.

    Apr 18, 2011 | 2008 Buick Enclave

    2 Answers

    How do i change the rear turn signal bulb on a 2009 buick enclave?

    Read the owner manual. Note that 2008 & 2009 manuals have incorrect information. Locate 2010 Enclave on internet. It has correct description and bulb number. Bulb is a 7443, NOT a 3157.

    Feb 09, 2011 | 2009 Buick Enclave

    4 Answers

    Where is the battery in a 2008 buick enclave?

    it may be under the back seat,,buick notorious with that..

    Jan 20, 2011 | 2008 Buick Enclave

    1 Answer

    Where is the coolant drain plug on the 2008 buick enclave?

    I could not find one on my Enclave either. I ended up disconnecting the lower rad hose and draining the coolant that way. It worked fine and was easy to do.

    Aug 08, 2009 | 2008 Buick Enclave

    Not finding what you are looking for?
    2011 Buick Enclave Logo

    Related Topics:

    184 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Buick Experts


    Level 3 Expert

    77186 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22265 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6927 Answers

    Are you a Buick Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides