Question about 1999 Chevrolet Silverado 1500
I was driving and the truck just died when turning on put new pump in and nothing the relay is good and all the fuses are good and the grounds are good
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Could be as simple as your fuel filter...after the truck starts..can you keep it runing by gunning the motor?
If you can feather the accelerator to keep the motor runing, I'd start at the filter, and then check the fuel pump
Posted on Dec 31, 2008
Chevy Trucks, Blazers, S10 pickup and the like will vapor lock ecspecially the 2000 models. Do not tighten the gas cap past 1 click. There is a tube that runs from the top of the tank down and this gets hot and collapses or burns in half. We just bought a reinforced rubber tube cut it to lengh and use it instead of part and it's worked grat for 2 years so far.
Posted on Feb 01, 2009
I assume the fuel pump fuse is good?
The only time voltage will be sent to the fuel pump will be the first 2 to 3 seconds if the starter is not engaged. You will want to crank the engine over and check for voltage on the load side of the relay, circuit #30 at the relay.
Let me know after you check.
Posted on Feb 23, 2009
Tips for a great answer:
Feb 05, 2015 | Cars & Trucks
May 14, 2014 | 1999 Chevrolet K1500
Apr 13, 2017 | 2005 Chevrolet Express
Oct 06, 2011 | Cars & Trucks
May 22, 2011 | 1999 Chevrolet Lumina
Oct 11, 2010 | 1987 Chevrolet S-10 Pickup
May 12, 2010 | 1989 Chevrolet Celebrity
Nov 23, 2009 | 1999 Chevrolet Silverado 1500
Jun 09, 2009 | 1992 GMC Sierra K1500
Feb 22, 2009 | 1992 Chevrolet Suburban
79 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: