Question about Cars & Trucks

Open Question

How to replace shift solenoid in trans 2006 lexus is250 po761

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 916 Answers

SOURCE: Hello, I own a 93

The transmission is controlled by the Transmission Control Unit (TCU).

Throttle position, rpm, and speed are input parameters to the TCU. The TCU has a default set of shift patterns. These shift patterns change over time based on your specific vehicle setup and driving habbits.

The shift patterns are only slightly affected by driving habbits over many driving cycles. But, changing the relationship between the throttle position and the actual speed being reported by the speed sensor can have an immediate effect on shift patterns.

While your speedo may now be correct, the realtionship between rpm and thottle position has not been corrected. That would take a gear change in the differentials.

The TCU can be reset to an inital learn base line. When this is done, the TCU will instantly learn the dynamics of your setup.

Any shop with an advanced ODB scan tool can reset the the TCU. The dealer or a transmission shop would be preferable.

You really should change your differential gears as opposed to resetting the TCU

This information was posted by ftgiles here

Posted on Jan 06, 2009

  • 1 Answer

SOURCE: Changing the filter on the 2006 Lexus IS250

oil filter wrench
Toyota part #09228-06501 or Oil Filter "F" Cap Wrench (from AutoZone)

Posted on Mar 24, 2009

ebjebs
  • 197 Answers

SOURCE: harsh shifting on a 4t65e trans how to repair

You can the info you need here also a little of any thing you need to know. http://aa1car.com/

Posted on Feb 28, 2010

Testimonial: "Thanks big time help"

dj_relly999
  • 4070 Answers

SOURCE: I replaced the battery in my 2006 Lexus IS250.

Hi! THe power switch on the driver's control may be activated. Try pressing the ON and OFF button of the power window. This may have jammed somehow. HOpe this helps and thank you for using FixYa!

Posted on Oct 12, 2010

  • 40 Answers

SOURCE: lexus rx400h 2006 - won't start "shift to park to start"

Hey Guys, The problem is that the 12V battery is low or dead. Having the battery replaced will fix this issue. (I have the same vehicle, had the same problem, and this was the fix)

Posted on Jan 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Goes into drive and moves no problem, but wont shift through the gears do I need new shift solenoids


if it won't upshift then your trans is shot...if it won't downshift, then you need new shift solenoids

Dec 08, 2015 | Lexus Cars & Trucks

1 Answer

2006 lexus is250 front driver door will not lock or unlock with wirless remote


Can you hear it trying to lock. Is there a clunk from the door or just nothing, in which case the door lock solenoid has probably failed. The door trim needs removing in any case to enable fault finding. Before you do that look at where the door harness passes from the body to the door down by the hinges and pull back the rubber boot. See if any wires are damaged. It maybe there is no supply to the lock.

Mar 30, 2015 | Lexus Cars & Trucks

1 Answer

Indicator lights overdrive not working and the overdrive not shift when selected


Hope it is a solenoid issue or your pulling the trans out
Try a trans shop
The shift solenoid should be accessible removing the tran pan
It is 14 years old so don't get you hopes up for a simple fix

Aug 12, 2013 | 2000 Lexus ES 300

1 Answer

I have a 2006 is250 lexus push button start and it only starts sometimes....radio, lights, nav everything works but it won't crank....takes 3-4 times before it cranks and it doesn't happen eve


The first thing you want to check for is the brake signal,without this signal it will not crank,this is the easy one make sure you get brake light,the second is to have the starter tested by a direct method,this gives the indication of the health of the starter

Mar 22, 2012 | Lexus IS 250 Cars & Trucks

1 Answer

Lexus IS250 trunk will not open


I have on 07 is250 and the power windows and trunk release were not working. There is a trunk/valet button in the glove box that needed depressed in order to make them work again.

Jan 03, 2012 | Lexus 220 SS SIGNATURE SERIES Cars &...

1 Answer

What needs to be done for a PO761 diagonist code reading on a 1996 ford explorer sport 4x4


That's indicative of a shift solenoid issue. The solenoid is located inside the valve body of the transmission. It'll probably need to be replaced.

Mar 26, 2010 | 1996 Ford Explorer

2 Answers

My 2006 Chevy Avalanche's check engine light came on last weekend. We checked the fuses, the air filter and the gas cap. The light went out. Then my truck slowly exhilerated in drive. It's automatic. It...


All these code's are to your transmission, your mech needs to do more then pull code's, he needs to look at date on sensor to transmission before opening.

P0740 - Torque converter clutch solenoid circuit

P0758 - Shift solenoid (B) electrical

P0785 - Shift timing solenoid

P0761 - Shift solenoid (C) performance or stuck off

I would try Trans - X first pores right in to trans.

Jan 15, 2010 | 2006 Chevrolet Avalanche

1 Answer

Lexus 2006 IS250 awd is having problem with the


it has electric power steering, take it to the dealer and ask if the service campaign has been done on the power steering rack. if not then it will be free and they will wash your car for you, fill up your gas tank and replace the steering rack and align the car. if it has been done then maybe they didnt reset the steering gear ecu.

Oct 07, 2009 | 2006 Lexus Is 250

1 Answer

Changing the filter on the 2006 Lexus IS250


oil filter wrench
Toyota part #09228-06501 or Oil Filter "F" Cap Wrench (from AutoZone)

Mar 14, 2009 | 2006 Lexus Is 250

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

602 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...