Question about 2001 Chrysler Town & Country

2 Answers

How to locate o2 sensor in chrysler town and town 1994

I have Chrysler 1994 town and country, When I start engine RPM goes high and low and motor cuts off, When parking at stop light it really forcing to take off even i break it hard. After driving few miles it doesn't jerk.

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    Visited the website for 3 consecutive days.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

In exhaust pipe before and/after catalyst converter. But o2 sensor is not going to fix your problem. Reason you are getting a lean code out of computer is because you have a vacuum leak. Chrysler was cheap and since computer doesn't have mass air flow sensor, it doesn't know why the idle air control valve can't open to desired position before engine rpm raises to high. Caused by vacuum leak. Which computer shows up as running lean or not enough fuel, when in reality its getting to much air and correct amount of fuel

Posted on Jun 18, 2014

  • one_life_728
    one_life_728 Jun 18, 2014

    since no maf sensor computer uses rpm to calculate amount of air entering engine.

  • one_life_728
    one_life_728 Jun 18, 2014

    called speed density logic, just ones and Ereos in computer


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 2,101 Answers

That is your idle air control valve . it is located on the throttle body next to the throttle position sensor

Posted on Dec 02, 2012


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 155 Answers

SOURCE: van brakes squeal/whistle even when stopped

Sounds to me like a dry, loose or worn serpentine belt. With the motor idling, lightly spray the serpentine belt as it's spinning with WD-40 or other oil based lubricant (Don't spray near the alternator). If this doesn't work, turn the mortor off and check the tension and for cracks or worn spots. The brakes will not squeal when you are completely still.

Posted on Jun 11, 2009

  • 1348 Answers

SOURCE: 1997 chrysler town & country was cutting out,died,now wont start

you need to put a scanner on it and see what code comes up.
my guess would be the crank sensor which is very common .

Posted on Feb 12, 2010

  • 170 Answers

SOURCE: My passenger door won't shut on my 2002 Town


Posted on Jun 28, 2010

Testimonial: "This is awesome! Thanks very, very much. I'm thrilled. The answer worked quickly and easily."

  • 79 Answers

SOURCE: 97 chrysler town & country

Well first it should only restart in park or nuetral, any check engine light on? May be fuel pump if not. Listen for pump running in fuel tank. Should run at key on for a few seconds. If check engine light on, it should be scanned for codes, possible crank sensor

Posted on Aug 10, 2010

  • 3640 Answers

SOURCE: picture of bank1 sensor1 o2 sensor location on

I do not have a diagram but, bank 1 is the bank where #1 cylinder is at. other side would be bank #2. so bank #1 o2 sensor is just before convertor.

Posted on Aug 29, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Picture of where the first o2 censor on the 1996

if your asking where is sensor 1 bank 1 its in the exhaust pipe coming off the firewall side(rear) of the engine, sensor 1 bank 2 is in the exhaust pipe coming off the rad side(front) of the engine. they are the first sensor that you come to.

Sep 19, 2014 | 1996 Chrysler Town & Country

1 Answer

How do you locate the upstream o2 sensors on a 1996 chrysler town & country with a 3.8 liter engine?

upstream means above or before the catalytic converter, check this link for Chrysler and Dodge 3.8 locations, the have a diagram for you too look at

Sep 01, 2011 | 1996 Chrysler Town & Country

1 Answer

How many oxygen sensors are there on chrysler town and country with 3.8 engine? thanks

There are 4 O2 sensors on your car. The upstream and downstream sensors are different. Is there a problem we can help you with?

Nov 22, 2010 | 2002 Chrysler Town & Country

1 Answer

What does code p0032 mean in a 2004 chrysler town and country mini van

Heater control circuit high, bank 1 sensor 1. Sounds like your O2 sensor in bank 1 in front of your convertor is bad.

Sep 08, 2010 | 2004 Chrysler Town & Country

1 Answer

Picture of bank1 sensor1 o2 sensor location on 2001 chrysler town & country

I do not have a diagram but, bank 1 is the bank where #1 cylinder is at. other side would be bank #2. so bank #1 o2 sensor is just before convertor.

Aug 29, 2010 | 2001 Chrysler Town & Country

4 Answers

Oxygen sensor for 2000 Chrysler T&C

yes, as long as the O2 sensor screw tightly and the clip (plug in match) dont recomend any cutting or rigging the wire it self. all O2 sensors has built with the same concept.

Oct 21, 2009 | 1996 Chrysler Town & Country

1 Answer

Where is the oxegen sensor located on a 2000 chrysler town and country 3.8 liter. does the oxegen sensor have a fuse

the oxygen sensor is located in the exhuast pipe,there could be more than one sensor, maybe 4 sensors on a 6 cylinder car and 2 sensors on a 4 cylinder car,so youre gonna have to know which one is bad,if the check engine light is on it will tell you which position sensor is bad like bank 1 sensor 2 something like that,also there is NO fuse for the o2 sensors

Oct 19, 2009 | 2000 Chrysler Town & Country

4 Answers

Don't know where the altornator sensor goes

if alt isnt charging it is usually a ground wire to ecm but i would have the alternator tested before throwing in an ecm

Aug 24, 2009 | 2000 Chrysler Town & Country

1 Answer

Chrysler 1996 town n country van lxi edition

the o2 sensors are near the exhaust manifolds one on either side. You must have over looked them

Jul 05, 2009 | 1996 Chrysler Town & Country

1 Answer

Test code TC-153A on a 1997 Chrysler Town and Country LXi

Dont be worried at all. The battery temp sensor isnt very important, most cars dont even have them. The only thing is you will have that light on. Good luck!!

May 15, 2008 | 1987 Chrysler LeBaron Town & Country

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides