Question about 2000 Ford Windstar

Open Question

2003 pontiac montana upper & lower intake torque specs]

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
chuck943
  • 783 Answers

SOURCE: Ford 460 Intake Manifold Torque spec

22 to 35 ft lbs

Posted on May 22, 2009

Ad
alicantecoli
  • 22156 Answers

SOURCE: WHAT ARE THE TORQUE SPECS

as tight as you pull them with decent spanner will suffice ,but if you want to be technical then it depends on the size of the shank of the joint ,so it be anything from 40nm to 80 nm ,i just pull them up with a ring spanner to two yanks and a grunt on teh final yank ,never had one come loose yet

Posted on Nov 30, 2010

alicantecoli
  • 22156 Answers

SOURCE: ford 4.2 intake manifold torque specs &

two passes ,start in middle and just nip each bolt working outwards left to right ,then a then a pull with the 3/8th drive rachet till they feel right ,about 15lbs but i never use a torque wrench ,too lazy to go to the stores and book it out with all the paperwork and wait in the queue

Posted on Dec 12, 2010

  • 1252 Answers

SOURCE: What is the intake plenum

michael_cass_35.jpg Here you go!!

Posted on Jun 10, 2011

dttech
  • 4803 Answers

SOURCE: Upper Intake Plenum Gasket R+R Torque Sequence

I cannot post a picture here because that is copyrighted material. However, the torque sequence is always "start in the center and work your way out to both ends...pretty simple.

The torque specifications are different depending on which engine your Escape is equipped with.

Posted on Apr 24, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Bonnieville Torque Specs for upper & lower heads


Call a Pontiac dealer and ask for service department, they will give you the specs.

Jul 09, 2016 | 2002 Pontiac Bonneville

1 Answer

03 Dodge Intrepid intake manifold torque specs top & bottom is for 3.5 V6


Lower Intake:
  1. Use a skin coat of RTV silicone on both sides of the water passage ports (outer most holes) and put the new lower intake gaskets into place
  2. Hand tighten the 13mm head intake bolts and Torque the bolts , starting from the center and working your way out in a circular pattern
  3. Torque these bolts in a few small increments until they have reached 250 inch pounds of torque.
  4. Upper Intake Plenum:
  5. When installing the intake air plenum , be sure to catch the four center bolts and the two side bolts (stiffener brackets) before tightening , The center bolts should be torqued to 250 inch pounds .The fuel rail bolts should be torqued to 100 inch pounds

Jun 24, 2016 | 2003 Dodge Intrepid

1 Answer

98 ford windstar intake manifold torque specs


Intake torque specs ' FordForumsOnline.com

www.fordforumsonline.com > Ford Tech Forums > Engine & Drivetrain

May 7, 2010 - 2 posts - ‎2 authors
ISO torque specs for the intake & plenum for a 98 Windstar...3.8 with the ... Our community is here to help you with any questions you have related to your Ford. ... Lower Intake Manifold to Cylinder Head Bolt 8-12 - (71-106).

Torque Specifications - AutoZone

www.autozone.com/.../Ford-Windstar.../Specifications/Torque-...

AutoZoneAutoZone Repair Guide for your 2004 Ford Truck Ranger 2WD 2.3L MFI DOHC 4cyl Engine Mechanical Specifications Torque Specifications. ... Ford Windstar 1999-2003 ... Bolts, Main Bearing Bolts, Rod Brearing Bolts, Crankshaft Damper Bolts, Flywheel Bolts, Manifold. Intake, Exhaust ... Vehicle: 2008 Ford F150, 98 Civic.

Dec 21, 2015 | 1998 Ford Windstar

1 Answer

WHAT IS THE TORQUE SPECS FOR INTAKE GASKETS


The torque specs are
-for intake manifold-to-cylinder head bolts/nuts
1996 and later-----132 in-lbs
-for intake manifold, upper to lower bolts
1995 and later-----89 in-lbs
-for cylinder head bolts
2001 and later----step 1--37
step 2--Turn an additional 120 degrees
I hope that this helps you out.

Jun 17, 2014 | 2003 Pontiac Grand Am

1 Answer

Need torgue specs & sequence for upper & lower


Lower: Torque to 28 N·m (250 in. lbs.)

Upper: Torque to 12 N·m (105 in. lbs.)

Sequences below:

mf_grimm_1.jpg

mf_grimm_2.jpg

Good luck.

Jul 23, 2011 | 2004 Dodge Intrepid

1 Answer

Hello I looking for intake manofold torque for my pontiac montana 2000


remember new head bolts also, torque to yeild bolts. i would recommend to get a service manual for torque specs and procidures for removal of heads. also head gaskets are leaking for a reason have heads checked for straightness and for cracks at local machine shop, keep all pushrods and rockers numbered for reassembly, pushpods are different and will cause major engine damage if mixed up.

Dec 14, 2010 | 2000 Pontiac Montana

2 Answers

Need torque specs for 2000 chevy malibu 3.1 cyl heads & intake


(step 1 ) the torque specs for the heads are---1998 through 2001 are 37 foot lbs. ( step 2) rotate an additional 90-degrees (1/4 turn). intake manifold bolts ( lower ) step 1-- 62 in-lbs, step 2--115 in-lbs. intake manifold bolts/studs ( upper ) 18 ft-lbs. this is for the 3.1 v-6, have a good day!

Aug 14, 2010 | 2000 Chevrolet Malibu

1 Answer

Looking for torque specs and sequence of both intake manifold and plastic plenum on 98 pontiac bonneville 3.8 non turbo


Lower intake bolts 11 ft. lbs start in the center of the intake and work your way out cross from side to side.Tighten the upper intake bolts with the same procedure with 89 inch pds.Be sure to apply threadlocker to the lower intake bolt threads.

Feb 07, 2010 | 1998 Pontiac Bonneville

Not finding what you are looking for?
2000 Ford Windstar Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...