Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Power door locks dont work
hello on the door locks not working could be a couple problems open the driver side door and were the door hinges are there is a small tube with wires in there that runs from the door into the side of the kick panel inside of the car these wires are your windowns locks and more now were the door open you will have to cut tube with a razr knife so you can see if any of the wires are broken now if there is no wires broken now the power door lock actuators inside the front right-and left door could be bad or the door look swiches this is not unlikey you can check this by removing the door panel you will see a rod or cable going from the door lock down the bottom of the door
now on the key not working that sounds like the door lock rods there that hooks to the lock on the inside of the door is off or one of the plastic clips that hold the rods has broken if it is not locking or unlocking your doors it is not unlikey for both sides to be broken you will have to remove the door panels to check
Posted on Mar 02, 2009
I just had the same problem with my 2001 escape from relacing the radio and wires accidently crossed. I switched both fuses like you said, and got no where...until....I noticed there is a 10 fuse hidden on the far right side of the panel, closest to the brake pedal. The fuse actually runs vertical unlike any of the other fuses which run horizontal, so it is kind of hidden..try that fuse, it should solve your problem, if not then I don't know sorry..
Posted on Jun 23, 2009
put the key in the ignition and tap the key farther into the cylinder and turn. should work. seems like a chrysler problem! a handy tow truck driver showed me this solution last night. you can have the cylinder replaced if this keeps happening or just keep a handy-dandy whacking object in your center console for just such an occassion!
Posted on Nov 23, 2009
Tips for a great answer:
Dec 21, 2015 | Cars & Trucks
Sep 21, 2014 | 2004 Kia Sedona
Jan 14, 2014 | Cars & Trucks
Nov 16, 2013 | 2008 Kia Optima
Jun 01, 2013 | 2006 Kia Optima
Jun 17, 2012 | 2007 Kia Optima
Mar 11, 2012 | 2005 Kia Optima
Aug 23, 2011 | Chevrolet Suburban 2500 Cars & Trucks
Dec 01, 2008 | 2002 Kia Optima
105 people viewed this question
Usually answered in minutes!