Question about Cars & Trucks

Open Question

What r the connections to on the jerrold impulse dpv7212/v5/b

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Car just died while driving, Had it checked and they said it's an ignition module, Bought a new one,still no start, i tried like 3 different modules, still, cranks but no start.Help.

check signals coming into the module.make sure spark impulses are present also must have 15ign positive+and ground body negative.-

Jun 14, 2018 | Cars & Trucks

1 Answer


code p 0341 refers to camshaft position sensor (CMP) sensor A bank 1--range /performance problem=== causes --insecure sensor/ rotor --- air gap--- wiring ---CMP sensor
you will have 2 camshaft position sensors ( one for each cam shaft but they should be the same unit
the sensor receives an impulse from the rotor on the cam shaft and that impulse has to be within the set parameters in the ECM
the air gap is critical to that impulse

Sep 10, 2016 | Cars & Trucks

1 Answer

Tachometer stopped working after replacing distributor pick up.

tachos get their impulse signal from the distributor , ignition module
check the wires that you connected / didn't connect after the distributor pick up replacement

Aug 13, 2016 | Cars & Trucks

1 Answer

How to change language on parrot v5 25c

Greetings, I read your question and I think Reliable-Store can help you in this. Here's the site link. Best Manuals

Jul 20, 2016 | 2011 Mazda BT-50 L-Cab

2 Answers

How much freon 2008 chevy aveo?

this should do it
2008 Chevrolet Aveo L4-1.6L
Heating and Air Conditioning Specifications, Capacities: Refrigerant System Capacities (V5 System)

Jun 11, 2015 | 2008 Chevrolet Aveo

1 Answer

Looking for surgentine belt diagram 4 a 1995 Isuzu Impluse

Search online "serpentine belt" '95 Isuzu 4 cal Impulse.

Jun 22, 2014 | 1992 Isuzu Impulse

1 Answer

Speedometer gives false reading after car warms up

Check that the body ground is clean and tight. I'm talking of the connection to your instrument panel. This connection be loose or corroded can make for improper impulses and incorrect readings. Lower impulses at lower speeds may be correct because it doesn't need the power as much for slower impulses. Only makes sense.

Aug 29, 2017 | 1998 Volkswagen Beetle

1 Answer

2003 volkswagon passat v5, looking for diagram fro the serpintine belt?

The serpentine belt routing diagram for 2003 VW Passat V5 2.3 liter

CS = Crankshaft
F = Fan pulley
Gen = Alternator
G = Guide pulley

T = Tensioner pulley
AC = Air Conditioning
PAS = Power Assisted Steering

Dec 01, 2010 | 2003 Volkswagen Passat

1 Answer

Where do i find the chassis munber on the Audi A4 estate 2005?? VMT!! and what do i do about the wrong VIN on the V5 vs the car window VIN. (B on V5 should be 8 as per car?!?!)

open the bonnet/hood and the chassis no is under the windscreen drain channel in front of the wiper panel.
also on a 4" square paper sticker under the carpet in the trunk/boot.and inside service book cover.
if its just 8/B do not worry,if the string is totally wrong then check engine no/chassis and inform swansea.
(worse case is a ringer)
email me with full chassis no from car and v5(both)

Jun 11, 2010 | 2005 Audi A4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

14512 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides