Question about 2001 Hyundai XG300

Open Question

Tcs light on -code p1632 -tcs system malfunction code-how to repair

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 184 Answers

SOURCE: reset the abs and traction contols system on my '05 hyandia elant

HAVE YOU TRIED DRIVING VEHICLE FOR A SHORT DISTANCE MOST CARS ARE LIKE THIS.

Posted on Dec 20, 2008

Ad
hotrodtod38
  • 141 Answers

SOURCE: abs AND tcs lights are on.

YOU MAY NEED TO TAKE IT TO THE DEALER FOR AREPROGRAMING OF THE ABS SYSTEM

Posted on Feb 13, 2009

co7196
  • 3433 Answers

SOURCE: TCS and ABS light comes on about 1 mile down the road.

Wheel speed sensor out of adjustment

Posted on Jul 07, 2009

  • 148 Answers

SOURCE: 2003 Hyundai Santa Fe ABS light is on along with TCS light

you may have damaged the ABS sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the ABS sensor on the spindle

Posted on Jul 15, 2009

SOURCE: I have a 05' Hyundai Santa Fe.The ABS light & TCS light.

dear friend-it sounds like one of the sensors(wheel)is faulty or one pne of the turnwheels came loose.

Posted on Jul 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my traction control


Is your trac light lit ? If so it has a problem an till it is fixed , you can't reset it. Need to have it checked for DTC'S - diagnostic trouble codes .
If the ABS control module detects a malfunction, it will disable TCS and will command the BCM to turn the TRAC LED Off. The driver can also disable TCS, if desired, by depressing the TRAC switch. When the driver depresses the TRAC switch, the ABS control module will disable TCS and will command the BCM to turn the TRAC LED Off.
DTC C0276 TCM Traction Control Not Allowed
DTC C0275 or C0276
The TCM sends a serial data message to the electronic brake control module (EBCM) indicating that torque reduction is temporarily not allowed.
DTC C0550
DTC C0896
The electronic brake control module (EBCM) is required to operate within a specified range of voltage to function properly. During antilock brake system (ABS) and traction control system (TCS) operation, there are current requirements that will cause the voltage to drop. Because of this, voltage is monitored out of ABS/TCS control to indicate a good charging system condition, and also during ABS/TCS control when voltage may drop significantly. The EBCM also monitors for high voltage conditions which could damage the EBCM.

Oct 16, 2015 | 2004 Saturn VUE

1 Answer

I just purchased a 2005 hyundai xg350L. The tcs light is on and won't shut off. That is the only one illuminated. Could this be a fuse or something much worse.


Hi Christine,

The TCS (traction control system) will stay lit only if there was a malfunction of that system. TCS helps your tires maintain traction on slippery wet or icy roads. The malfunction is usually due to damaged or malfunctioning wheel speed sensors due to corrosion or damage of the sensor wire harness during suspension repairs or brake pad replacement. You can still drive the car, but the traction control system will not help you if your vehicle's tire slips or spins faster than the other.

Jan 09, 2015 | Hyundai Cars & Trucks

1 Answer

Light abs traction control stays 1998 buick park avenue


PRE-DIAGNOSTIC INSPECTIONBefore diagnosing ABS/TCS, perform a comprehensive visual inspection of system as follows.Check ABS/TCS wiring harness connectors for looseness. Check harness routing; pay particular attention to wheel speed sensor wiring harness routing. Check fuses No. 1D, 5B and 6B in instrument panel fuse block. Check fuses No. 1 and 2 in underhood fuse block. Check brake fluid level in master cylinder reservoir. Check brake fluid level in Pressure Modulator Valve (PMV) assembly reservoir. Ensure parking brake is fully released. Ensure parking brake switch is functioning properly. Always perform ABS/TCS system functional check before using DIAGNOSTIC CODE CHARTSThe EBCM/EBTCM has self-diagnostic capability, which can detect system failures. Fault codes stored by EBCM/EBTCM can be displayed using Tech 1 scan tester. There are no provisions for flash code diagnostics.Begin ABS/TCS diagnosis with PRE-DIAGNOSTIC INSPECTION procedure. If failures are found during pre-diagnostic inspection, perform necessary repairs, and proceed with ABS/TCS FUNCTIONAL CHECK. See Fig. 5 .If no failures are found during pre-diagnostic inspection, go to ABS/TCS FUNCTIONAL CHECK. See Fig. 5 . The ABS/TCS FUNCTIONAL CHECK will either indicate ABS/TCS is functioning properly or direct technician to various diagnostic procedures such as diagnostic charts, symptom diagnosis or BRAKE warning light diagnosis.CHART D - TRACTION OFF WARNING LIGHT ON CONTINUOUSLY & NO DTC SET (BUICK WITH UH8 OR U2A INSTRUMENT CLUSTER)Circuit DescriptionWhen ignition switch is first turned to RUN position, EBTCM goes through a self-test, which lasts 2-4 seconds. During self-test, EBTCM commands TRACTION OFF indicator warning light on. Powertrain Control Module (PCM) can also command EBTCM to set a Code 75 which will illuminate TRACTION OFF indicator.Traction control switch is located either on instrument panel center trim plate or driver's front door trim panel. Switch allows driver to select traction control mode (on/off). When traction control system is turned off, TRACTION OFF warning light comes on.EBTCM monitors transaxle temperature through

Jul 12, 2014 | 1998 Buick Park Avenue

1 Answer

Jeep 2006 Malfunction Indicator Light & ESP/TCS Indicator Light


go have the vehicle scanned for trouble codes most auto stores offer this service for free the codes will help in assisting repair

Jul 31, 2017 | Jeep Cars & Trucks

1 Answer

TCS light and Brake light stay on.


The main reason the TCS light is on is because there is a problem with the main brake system. The traction control system uses the hydraulic brakes to help keep the car on the road in a skid or other event.
If the main brake system is faulty, the TCS can't do its job.
The hydraulic brake system may be working fine in your case, but the TCS does not know that.
I wonder if that low fluid switch can be bought separately ??

Jul 26, 2012 | 2003 Honda Accord

4 Answers

Tcs light came on with my 2000 honda odyssey,what does that mean?


TCS = Traction Control System

The TCS light is on because the check engine light is on this is common repair the check engine light failure abd the tcs will go back to normal.

You need to check the code to see if it is a trans code and then if it falls under the bulletin limits Honda will replace the trans under warranty. Even if you are out of warranty Honda will sometimes do a partial warranty. Here's a copy of the Bulletin.

There are several things that will turn the check engine light and tcs light on .if you get the code I can tell you exactly what the problem is . on your year i see transmission problems as well as egr problems. if you go to any large auto parts store they will check the code for free or a very small fee.

Hope helps (remember to rate this answer).


Mar 17, 2011 | 2001 Honda Odyssey

1 Answer

The TCS light came on and the car started jerking especially at stops. The light would go off for a while after restarting the car but the same problems would happen and the light would eventually come...


The TCS stands for Traction Control System, I believe. The TCS is controlled by inputs from the wheel speed sensors. If you have a bad sensor, then a new hub may be required to repair it.

The check engine light may be a sepawrate problem. Have the codes scanned for both the Anti lock braking sytem, TCS, and the check engine light.

Sometimes it will require a separate scanner for the TCS/ABS vs. the Check Engine light.

Good luck on this diagnosis and repair.

Jan 29, 2011 | 1996 Acura TL Series

3 Answers

Problem with TCS on Mazda 2000 Millenia S


i dont see any such code 1118, BUT, 1526/1540 is classic. 1526 is the vent solenoid circuit, and 1540 is the abv. these solenoids live on the back of the motor, right next to the egr valve. there is a row of 4, you are concerned with 2 and 4, going from right to left. i would first replace both, since they tend to go out around the same time. they control the abv, which controls boost. if this valve/circuit is not operating correctly, the pcm puts the car in "limp home" mode; will not rev over 3k, and tcs off/tcs lites come on. if you want to, ohm the solenoids when hot. normal is about 26, above 30 or 0, and they are bad. but from your description, i know they are bad.

Apr 17, 2009 | 2000 Mazda Millenia

2 Answers

TCS/SLIP & Check Engine Light Warning


TCS is Traction Control System,and all TCS's are controlled though the Anti Lock Braking (ABS) system.Here's how it works:Each wheel,or in some cases,only the drive wheels have a speed sensor mounted near the hub or axle,and sends a speed signal to the PCM (Powertrain Control Module).The PCM monitors wheel speed continuously,and if it sees a speed out of the ordinary,say for example the right rear tire is spinning and traveling at a much higher speed than the left rear,the PCM will pulse the brakes through the ABS system on the right rear to slow down the right rear so that the left and right wheel speeds match up,this is how the traction control works.So,if you have a TCS problem,the PCM will see this and set a Dignostic Trouble Code (DTC).You need to pull the DTC's out of the system with a scan tool,diagnose and repair the DTC's.It could likely be something as simple as a malfunctioning wheel speed sensor,but you won't know until the codes are pulled out,as this will point in the general direction.Good luck.

Aug 09, 2008 | 2003 Nissan 350Z

Not finding what you are looking for?
2001 Hyundai XG300 Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...