Question about Dodge Durango

Open Question

Torque specs on harmonic balancer for 2001 4.7 dodge durango

Torque specs on harmonic balancer

Posted by Anonymous on


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 83 Answers

SOURCE: How To Remove the harmonic balancer on a 2001 ram

Here is a link to a 2001 Dodge Ram Factory Service Manual with diagrams and step by step procedures.

Posted on Sep 27, 2009

  • 1305 Answers

SOURCE: How to remove the harmonic balancer on a 1995 Dodge Intrepid 3.5

There is a nut in the center of the balancer... loosening may require an "impact" or a sharp blow with a hammer to begin to loosen the nut. Once loose, you can use a harmonic balancer puller (rentable at a local rental yard) Since its a very tight fit you'll need the puller to persuade it loose from the crankshaft.... watch your knuckles...

Posted on Oct 14, 2009

  • 33 Answers

SOURCE: what are the torque specs for main and rod bearing

go to and set up a free account. You will then have access to vehicle repair guides and can get all the info and diagrams you need. Hope this helps!

Posted on Jan 02, 2010

Ford Guroo
  • 71 Answers

SOURCE: how to take harmonic balancer off of a dodge

This is a specialty tool and you can probably borrow or rent one from Advance Auto parts or Auto Zone.They are also not to expensive to buy but since you will probably never use it again I would just rent one. The tool has a bolt through the center that pushes into your crankshaft and bolts on the outside of the puller that bolt into the bolts that hold on your lower pulley. After you attach the puller when you tighten the center bolt it will pull the balancer off. The tool is called of course a hramonic balancer puller. Hope this helped you out, Roger

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


This is for a 5.7 Ram
the torque should be 150-180 ft lbs. anywhere in this range is good.

Register at this website to get all the torque specs.

Aha, I took me 30 minutes, but here you go. The secret was the change of search query wording to;
2002 2.7 DODGE INTREPID TORQUE SPECS crankshaft damper

(198) Install damper center bolt. Tighten center bolt
while holding the damper with Special Tool 8191 to
170 N•m (125 ft. lbs.) (Fig. 76).


Jan 11, 2017 | 2002 Dodge Intrepid

1 Answer

Torque specs for the harmonic balancer on a 1994 buick roadmaster

Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Oct 18, 2016 | 1994 Buick Roadmaster

1 Answer

Harmonic balancer bolt is torqued to specs,but there is still play in the pulley.

23880111-k0la5llha3vhnr1ljv3tx424-5-1.jpgYour pulley has a woodruff key like the one in the photo. In order to have zero play, you need to replace the key and the harmonic balancer

Mar 21, 2014 | Honda Odyssey Cars & Trucks

2 Answers

Torque spec for 1RZ harmonic balancer

how can i set a toyota 1rz engine on timing

Jul 19, 2012 | Cars & Trucks

1 Answer

How do you remove timing cover on a 2001 dodge durango 5.9

this thing, has a lot things to do. a certified technicians only can do the job. but if you wanna do it alone, here are some instruction(s) after removing the parts to have acces on it.
1. Remove the crankshaft pulley using the appropriate socket.
2. Remove the harmonic balancer using the harmonic balancer puller.
3. Loosen the oil pan bolts.
4. Remove the front two oil pan bolts--one on each side of the crankshaft--these two bolts help hold the timing cover in place.
4. Remove the timing cover bolts using the appropriate socket.
5.Pull the cover off the block.
6.Remove the seal from the timing cover using a seal puller(if it is your problem).
7. Clean the gasket mounting surfaces on the engine and timing cover with the scraper.
8. Smear a thin layer of silicone on the timing cover's gasket mounting surface.
9. Fit the gasket on the timing cover.
10. Install the timing cover and tighten the bolts to it's specified torque.
11. Reinstall the two oil pan bolts and tighten them to it's specified torque.
12. Reinstall the accessories in reverse order of removal.

Feb 19, 2012 | 2001 Dodge Durango

1 Answer

What are the torque specs for main and rod bearing cap bolts on an 01 dodge durango 4.7

go to and set up a free account. You will then have access to vehicle repair guides and can get all the info and diagrams you need. Hope this helps!

Jan 02, 2010 | 2001 Dodge Durango

1 Answer

Need to the torque specs for a 1999 Dodge Durango

Head Torque sequence Step 1: torque to 50 Ft/Lbs Step 2: torque to 105 Ft/Lbs recheck final torque in sequence.

Torque intake manifold: Step 1: 12 inch/Lbs, (hand tight) Step 2: 72 inch/Lbs, (6) Ft/Lbs Step 3: 12 Ft/Lbs
torque intake plenum: Step 1: 24 inch/lb (hand tight) Step 2: 48 inch/lb (4) Ft/Lbs Step 3: 84 inch/lb (7) Ft/Lbs (To torque bolts, start in center using crisscross pattern)

Apr 07, 2009 | 1999 Dodge Durango

1 Answer

Harmonic balancer

Check out this link:,1602402/initialAction,repairGuide/shopping/repairGuide.htm?pageId=0900c152800cc1e1. This is for a 6 cylinder in your year. This gives you the specs for all of the bolts associated with the crankshaft damper. Good Luck!

Jul 16, 2008 | 1991 Buick Century

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides