Question about 2004 Dodge Durango

Open Question

P2308 ignition coil c secondary circuit - 2004 Dodge Durango

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 Grand caravan 3.3 with 236.000 miles it came up with a code P2308 ignition coil C secondary circuit ? No spark to cylinder 6 & 3 ?


No cylinders fire at same time. 6 & 3 must be from same coil-ignition coil C-that is the one with the problem. And the secondary circuit- that is the spark firing portion of the coil. Coils have a primary winding circuit and a secondary wire winding circuit. The secondary comes out of coil as the tower, or the spark plug wire tower -the business end of the coil leading to the plug.

You could have a bad new coil (happens occasionally) or the connection to that coil may be the problem-the connection where the coil snaps onto the coil pack assembly. Try swapping that coil (coil C) with another one there and see if problem follows the coil. See? Keep your plug wires the same, just swap coils with another and see if the new position for suspect coil causes other cylinders to misfire. If a different coil in that "C" position causes same code, then it is not the coil itself, but probably the base assembly that the coil connects to.

These ignition systems use what is called a waste spark, or exhaust waste spark system. The coil will send spark to 6 & 3 simultaneously, but since one is always on the exhaust stroke while the other is on the compression (firing) stroke, the exhaust spark is very weak, and all the energy from coil is directed to the compression stroke cylinder. It sounds crazy but it works great.

Since you say it runs bad just as before, that indicates the coil is not the problem, but something wrong with the base of the coil pack . This is where the wiring is directed to the coils.

Oct 13, 2017 | 2005 Dodge Grand Caravan

1 Answer

2004 caravan 3.3 OBD code P2308 ignition coil "C" secondary circuit ? No spark to cylinder 6 & 3 ? plugs & wires good & new coil pack ??


This code could also mean the transistor inside the engine computer is fried . New PCM/ECM needed .

P2308 Dodge Description The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. When the ignition coil driver is switched on, current rapidly builds up to a maximum value, determined by the coil inductance and resistance. When the current is switched off, the magnetic field collapses which induces a secondary high voltage surge and the spark plug is fired. This high voltage surge creates a flyback voltage which the PCM uses as a feedback during the ignition diagnostics. The PCM continuously monitors the ignition system for concerns. The P2308 code sets when the PCM detects a short to voltage in the circuit.

Videos on youtube for testing Computer drivers . Chrysler Pacifica misfire codes p2308 p0303 Doesn't matter this a chrysler . Dodge , Chrysler and Jeep , samething

Jan 30, 2017 | Cars & Trucks

1 Answer

Dtc Code P2314


2002 Dodge Intrepid Ignition Coil Circuit Codes: Electrical ...

www.2carpros.com/.../dodge-intrepid-2002-dodge-intrepid-ignition-coil...
Aug 13, 2008 - 2002 Dodge Intrepid 6 cyl Front Wheel Drive Automatic 130000 miles. Getting the following codes. P0353 P2302 P2305 P2308 P2311 P2314

What are 2002 Dodge Intrepid trouble codes PO442 and ...

www.answers.com > ... > American Cars > Dodge > Dodge Intrepid
What does the Error Code P0846 on 2002 Dodge Intrepid mean? .... Trouble code P2314 means: Ignition coil E, secondary circuit - malfunction Trouble code .

Oct 29, 2015 | 2002 Dodge Intrepid

1 Answer

How to trouble shoot code p0360


P0360 - Ignition Coil '10' Primary/Secondary Circuit Malfunction

Ignition Coil Primary/Secondary harness is open or shorted
- Ignition Coil Primary/Secondary circuit poor electrical connection
- Faulty Ignition Coil Primary/Secondary
- Faulty Engine Control Module (ECM

Read more: http://engine-codes.com/p0360.html#ixzz21fHBlyUw

Jul 25, 2012 | Chevrolet Silverado 2500HD Cars & Trucks

1 Answer

I have no spark in cylinders 2,4,6 on my 2002 Ford escape and three codes 354,355,356 Which means the same . After checkin those Three coils I found out , there is no negative Any advise?


P0354 - Ignition Coil D Primary/Secondary Circuit Malfunction.

Description of DTC:
The ignition signal from the Powertrain Control Module (PCM) or Electronic Control Module(ECM) is sent to and amplified by the power transistor. The power transistor turns ON and OFF the ignition coil primary circuit. This ON/OFF operation induces the proper high voltage in the coil secondary circuit.

Symptoms:
- Lack/Loss of Power
- The engine may be harder to start
- Engine hesitation
- Check Engine Light On
- No spark

Possible Causes:
- Open or short in the ignition coil circuit
- Ignition coil circuit shorted to ground
- Ignition coil connector
- Damaged ignition coil
- Damaged PCM or ECM

Possible Solutions:
- If damage, repair ignition coil circuit
- Replace ignition coil
- Replace PCM or ECM



P0355 - Ignition Coil E Primary/Secondary Circuit Malfunction.

P0356 - Ignition Coil F Primary/Secondary Circuit Malfunction.

Jan 18, 2011 | 2002 Ford Escape

1 Answer

Miss fires and stots off when I give it gas as codes 1391 ,0351, 0352, 0353,


P1391 - Not a valid obd code.
B1391 - Oil Level Switch Circuit Failure
C1391 - Not a valid obd code.
U1391 - Not a valid obd code.
Its possible you may have misread this code. If it is B1391 that would be the only code with 1391 for your vehicle.

P0351 - Ignition Coil A Primary / Secondary Circuit Malfunction. The ignition signal from the Powertrain Control Module or Electronic Control Module is sent to and amplified by the power transistor. The power transistor turns ON and OFF the ignition coil primary circuit. This ON/OFF operation induces the proper high voltage in the coil secondary circuit.

Possible Causes:
- Open or short in the ignition coil circuit
- Ignition coil circuit shorted to ground
- Ignition coil connector
- Damaged ignition coil
- Damaged PCM

P0352 - Ignition Coil B Primary / Secondary Circuit Malfunction.
Same repair info as P0351.

P0353 - Ignition Coil C Primary / Secondary Circuit Malfunction.
Same repair info as P0351



Solutions:
- If damage, repair ignition coil circuit
- Replaced ignition coil
- Replaced
PCM or ECM

Jan 16, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

I need to know what Dodge code P2311 & P2323 means.


P2311 Ignition Coil "D" Secondary Circuit
Internal fault with ignition coil #4 Could also be the PCM coil driver circuit

P2323 means "IGNITION COIL 8 SECONDARY CIRCUIT - INSUFFICIENT IONIZATION". What that means is "If the PCM detects that the secondary ignition burn time is incorrect, to short, or not present, an error is detected". Attached is the complete write up on possible causes and diagnostic tests. Hope this helps.

Mar 26, 2010 | 2005 Dodge Ram 1500

1 Answer

2004 Dodge Grand Caravan engine light on, missfire


That is a code for the secondary (spark) circuit on cylinder number 3. It is usually caused by a bad connection between the coil and the plug (take the coil off the plug and check for moisture in the boot). If not, it might be a bad coil...

Sep 17, 2009 | 2004 Dodge Grand Caravan

Not finding what you are looking for?
2004 Dodge Durango Logo

Related Topics:

1,064 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...