Question about Hyundai XG300

Open Question

Ho do you fix p1632 hyundai xg300 code - XG300 Hyundai Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: Code P1632

These cars had a tendency to "lose" the password for the theft deterrent system. Your body control module doesnt understand your key, therefore tells your pcm to discountinue fuel supply. To reprogram the system, start the engine and let it stall. Leave the key in the run position. The theft light should flash for 10 minutes. When the light stops flashing, Turn the ignition off for 10 seconds. Turn the ignition back to the run position. This procedure tells the BCM that on the next ignition cycle, to accept the new password. Now, it should start. If not, it may require the clearing of the code, and possibly the reprogramming of the PCM, which needs to be done with a dealer scan tool or equivilant.

Posted on May 20, 2009

ghost4548
  • 776 Answers

SOURCE: replacing 2001 Hyundai XG300 headlight, how difficult?

1bd6158.jpg Here's a photo - remove cap, disconnect connector to bulb, move bulb retainer out of the way & extract bulb - installation of new bulb is in reverse order.
If you want to replace the entire ASSEMBLY, there are three (3) 10mm bolts holding the assy. Remove them, then slide assy forward to access connectors - disconnect them.



06bdfd0.jpg

Posted on Jun 20, 2009

  • 1071 Answers

SOURCE: 2001 Hyundai XG300 with an engine light (p0715/P1159)

clean up all ground wires but you may need both of those items

Posted on Jul 21, 2009

  • 71 Answers

SOURCE: Can someone help me with these Codes I got from a

Visit http://www.obd-codes.com/trouble_codes/ and
http://hyundai.wikia.com/wiki/OBD-II_Error_Codes
for the codes you have.

So the 171 and 174 indicate lean fuel/air, the 1191 and 1193 indicate the car is in limp home mode. And 1632 is a traction control issue.

The lean mixture might be as simple as a plugged fuel filter, or as complex as trouble with the injectors, the throttle position sensor, fuel pressure regulator, or fuel pump. How long since you replaced the fuel filter? If it has been close to or beyond the recommended interval this is a cheap ($20 for the part) and fairly easy thing to try.

The lean fuel/air could be the cause of the limp home mode.

The 1632 code is a traction control system malfunction. Could be an intermittent issue or occurred because the engine is operating erratically. With this code the car should still run fine, but the TCS won't work properly.

Posted on Jan 05, 2010

emissionwiz
  • 75817 Answers

SOURCE: how to locate the antenna in hyundai xg300 2001

it is embedded in the rear glass

Posted on May 17, 2010

Testimonial: "thank you so much"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 xg300 code p1632 how can I fix this? help pls


If this is the theft deterrent system, try turning key to on and wait ten minutes, turn off, then try to start.

Feb 20, 2016 | Cars & Trucks

1 Answer

How do you disable tcs/ abs dash lights on a Hyundai xg300. short of replacing a sensor there is nothing wrong with the car. Just need a quick inspection fix.


cant by pass problem with abs brake see lights flashing there is a problem with abs brake system need fixing could have brake failure.

Sep 18, 2013 | 2001 Hyundai XG300

2 Answers

I have a 2001 Hyundai XG 300 and yesterday it decided not to start up.It sounds like its trying but it doesnt.This is all the work i have recently had done to it.I have had new EGR valve,Timing Belt and...


have your car computer checked, 1-3 codes is normal but more than that is usually the computer freaking out. check if it's wet and dry it if needed than re-install.

Jan 13, 2011 | 2001 Hyundai XG300

1 Answer

2001 hyundai xg300. Driving on hiway, car makes a bang sound, rpms go up, check engine light comes on, P1159


Have someone rescan the computer wiyh a good scan tool, p1159 is not a good code for a 2001 xg300,

Sep 02, 2010 | 2001 Hyundai XG300

1 Answer

Can someone help me with these Codes I got from a diagnostic? I have a Hyundai XG300. P1191 P0171 P0174 P1632 P1193 I know this is a lot to ask but there has to be a good mechanic out there to help me I...


Visit http://www.obd-codes.com/trouble_codes/ and
http://hyundai.wikia.com/wiki/OBD-II_Error_Codes
for the codes you have.

So the 171 and 174 indicate lean fuel/air, the 1191 and 1193 indicate the car is in limp home mode. And 1632 is a traction control issue.

The lean mixture might be as simple as a plugged fuel filter, or as complex as trouble with the injectors, the throttle position sensor, fuel pressure regulator, or fuel pump. How long since you replaced the fuel filter? If it has been close to or beyond the recommended interval this is a cheap ($20 for the part) and fairly easy thing to try.

The lean fuel/air could be the cause of the limp home mode.

The 1632 code is a traction control system malfunction. Could be an intermittent issue or occurred because the engine is operating erratically. With this code the car should still run fine, but the TCS won't work properly.

Jan 05, 2010 | 2001 Hyundai XG300

1 Answer

What do i do when the tcs and abs lights come in my hyundai xg300


get it diagnosed, could be a simple sensor issue to an expensive computer issue. codes will be stored to help in diagnosing

Nov 17, 2009 | 2001 Hyundai XG300

1 Answer

2001 Hyundai XG300 with an engine light (p0715/P1159)


clean up all ground wires but you may need both of those items

Jul 21, 2009 | 2001 Hyundai XG300

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

590 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...