Question about Cars & Trucks

Open Question

Chevrolet monte carlo z34 gives a P0134 code - Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 77 Answers

SOURCE: 1996 chevrolet monte carlo

Just because you cant feel in doesn't mean it isn't slipping. The computer monitors input rotation speed and output rotation speed of the transmission. If the output isn't within a certain range the computer stores this code. The only reason for this is transmission slipping and will require a rebuild.

Posted on Apr 28, 2009

Ad
  • 314 Answers

SOURCE: Symptoms of a Bad Crank sensor in 96 Monte Carlo Z34?

it does sound like a bad crank sensor

Posted on Jul 10, 2009

  • 1 Answer

SOURCE: 1998 Chevrolet Monte Carlo brake lights do not

I had to replace the turn signal switch in my 1998 z34.Now everything works fine.

Posted on Sep 19, 2009

falspet
  • 438 Answers

SOURCE: replacing rear struts, should sway bar need

check the bushings for ware if there tight and no cracks your good to go.

Posted on Jan 29, 2010

edwardafzal
  • 112 Answers

SOURCE: where is shift solenoid located

The transaxle shift solenoids are located in the transaxle.

Hope this helps, it it does please leave feedback and vote Thank You and Good Luck

Posted on Jan 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO REMOVE 4T60E TRANSMISSION FROM A 96 Z34 MONTE CARLO?


You don't have to pull it to replace the TCC. Remove the pan and you can access the TCC solenoid. 40b12bb6-08f8-4f1c-b959-9bfe6f7b08fb.gif

Aug 06, 2014 | 1996 Chevrolet Monte Carlo

1 Answer

Code P1870 for a 1996 Chevrolet Monte Carlo Z34 3.4 litre


Very common Transmission code - solution # 1 check to be sure Fluid is full . If not trans code sent plus will turn on check engine light or service engine soon . # 2 be sure condition of fluid is Good / Not worn out . Fluid must be Red / Reddish in color Cold and When hot- warm still have red / even lighter than when cold .# 3 if a higher than 50,000 mile car used in heavy rush hour traffic during hot weather then change fluid to give it fresh oil / Trans will fight heat better and save you a $$ 2000 repair bill . # 4 most important of all you can save a Trans by adding Lucas Trans treatment it is $ 20 some places but well worth $$ to extend life of vehicle if one in need of saving $$ .This can even be added to existing fluid if color is still reddish .

Jul 06, 2012 | 1996 Chevrolet Monte Carlo

2 Answers

Where is the low side a/c port on a 1999 Monte Carlo Z34?


Check under the air filter case, under the hood on drivers side.

Sep 01, 2010 | 1999 Chevrolet Monte Carlo

1 Answer

Where a crank senor on a 1995 monte carlo Z34 and show me where it at


2431c67.gifThis is for a 94 pontiac, but if it's the 3.8 in your Monte, then it should be the same.

Dec 21, 2009 | 1995 Chevrolet Monte Carlo

2 Answers

1998 Chevrolet Monte Carlo brake lights do not


check blubs if the center light works should be working side brake lights

Sep 07, 2009 | 1998 Chevrolet Monte Carlo

1 Answer

My 1997 monte carlo z34 3.4 engin is holding high rpms


I had a similar problem on a 3.4 Lumina Z34. It was a leaking intake gasket. Be careful with the plastic vaccumn lines as they will get brittle.

Aug 01, 2009 | 1997 Chevrolet Monte Carlo

1 Answer

Car hesitates, loses power and sometimes shuts off.


Air cleaner condition is important when changing maf

May 19, 2009 | 1999 Chevrolet Monte Carlo

1 Answer

Heater cord


Yes, just attach the two heater hoses together that go into the dash to heater core.

Jun 09, 2008 | 1995 Chevrolet Monte Carlo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...