Question about 2006 Chevrolet Impala
Coolant leaking from the front left and right crossover flange gaskets.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Thermostat on 2002 Chevy Impala
the best thing to get is the Haynes manual for your car at advanced auto or autozone or somewhere like that and the book will tell you how to take everything apart and put it back. i think the manual is about $16.00
Posted on Jul 30, 2008
$400 is a very good price for it, very long process. Took my mechanic 6 hours on my 99 Malibu, have to remove the head. $700 for my malibu
Posted on Dec 02, 2008
I HAVE A 2006 CHEVY TRAILBLAZER AND NOTICED THIS WEEK IN THE EXTREME COLD AFTER I HAVE LET THE TRUCK WARM UP IN THE MORNINGS THERE ARE SMAL PUDDLES OF ANTIFREEZE THAT IS LEAKING IN FRONT. AFTER I DRIVE IT I HAVE NOT NOTICED THAT IT IS STILL LEAKING AND THE TEMP IS NOT GOING UP WHILE I DRIVE THE TRUCK. WHAT COULD POSSIBLY BE WRONG?
Posted on Jan 06, 2010
Tips for a great answer:
Unscrew the bolt that holds the negative connection to the Impala's
battery. Set this bolt aside for later use.
Remove the engine cover to access the intake manifold and manifold
gasket. Disconnect the throttle body inlet duct from the engine.
Twist off the radiator cap to allow draining of the coolant to flow more
smoothly. Place an empty container beneath the radiator's drain plug, and
remove this plug. Allow all of the engine coolant to drain into the empty
container. Replace the drain plug once you are finished.
Tag all of the electrical wiring and hoses before removing so that
reconnection is precise to factory settings. Remove these parts, individually,
from the intake manifold.
Loosen the bolts that hold the intake manifold to the Impala's engine
block. Lift the intake manifold from the block once all bolts have been
Use the flat-head screwdriver to pry the old intake manifold gasket from
the engine block. Discard this part once you have removed it.
Clean the engine block thoroughly with the engine degreaser and linen
cloth. If necessary, use a gasket scraper to remove excess buildup and grime.
Place the old intake manifold on top of the newly-installed manifold
gasket until it aligns with all of the holes of the cylinder flanges and
Attach all of the bolts with your hand to the manifold. Once all bolts
have been positioned, use a torque wrench and apply 15 foot-pounds of pressure
to the bolts to secure the manifold into place.
Reconnect all of the necessary hoses and electrical wiring to the
intake. Pour the engine coolant back into the radiator.
Reattach the engine cover on top of the intake manifold and engine
block. Start the Impala's engine and check for any leaks around the new intake
Jul 08, 2012 | 1996 Chevrolet Impala SS
Dec 07, 2010 | 2006 Pontiac G6
May 22, 2010 | 2006 Chevrolet Impala
Dec 16, 2009 | 2000 Volkswagen Beetle
Sep 02, 2009 | 2001 Audi TT
Aug 25, 2009 | 2005 Dodge Stratus
Dec 25, 2008 | 2006 Chevrolet Impala
Oct 18, 2008 | 1998 Ford Mustang
Oct 10, 2008 | 2000 Ford F150 Flareside SuperCab
142 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: