Question about 1999 Toyota Sienna

Open Question

My tire is stuck after removing the lock nut, how do l remove the tire?

Posted by Anonymous on


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: removing a locking wheel nut from my toyota car

you need to get the wheel lugnut wrench out of the trunk or under the hood and take off the wheel cover nuts (the plastic ones you can turn by hand) Then you should have access to your wheel locks...

Posted on May 19, 2008

  • 43 Answers

SOURCE: Unable to remove the tires.

If you have all the lug nuts off the wheel will come off it is problaby rusted to the hub.  Do not take the large bolt out.  You need to loosly screw 2 of the lugs back on but not all the way.  Now kick the tire w/ the heel of your shoe to break it free.  or if you have a plastic weighted hammer hit on the backside of the tire to break it free.  It will come loose

Posted on May 29, 2009

  • 1249 Answers

SOURCE: How to change tire on 2006 Toyota Solara? All 5

How many miles...and how cold is it? Many times in bad weather and with mileage, the wheel hub sticks to the rotor...Be sure your jack stands are supported...but you may need to kick, or hit the inside of the tire you are trying to remove...enough of a jolt should loosen the stuck condition...Be sure to lubricate and clean off the inside of the wheel at the contact circle...Hope this helps.

Posted on Feb 08, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How to remove rear wheel

Hi, I hope I can help with this.
You should only have to remove the lug nuts and the wheel and tire will be removed. If you removed the center wheel nut then it sounds like you are trying to remove the brake rotor. To remove the wheel the 5 or 6 lug nuts need to be removed. To remove the rear spare tire there is a plastic cover to remove which then has a key hole (locks for security). You will need to unlock this as well.

Jul 28, 2016 | Cars & Trucks

1 Answer

How do I remove the flat tire

Hi Frank:
- Block the diagonally opposite tire.
- Set the parking brake
- Put the transmission in Park or Low gear.
- Set the jack under the frame or body lift point.
- Jack up until tight against lift point
- Remove trim cover if present
- Use wheel nut wrench to loosen nuts. Do not remove nuts.
- Jack up until wheel off ground.
- Remove wheel nuts.
- Wheel should now be able to be removed. Sometimes they will need a kick to loosen them. If still stuck, reply as a COMMENT to this e-mail and I'll give you some other hints.
If you want to remove the tire from the rim, click on this youtube link.

Jan 21, 2016 | Cars & Trucks

1 Answer

I have removed all the lug nuts but still cant remove tire

If the tire is stuck,
1. Reinstall all lug nuts
2. Loosen all lug nuts 1 turn from tight
3. Set car on ground
4. Push car till wheel wiggles (back and forth)
5. Jack back up
6. Continue with removal

Jun 04, 2011 | Buick LeSabre Cars & Trucks

2 Answers

I have a 2003 chrysler concorde and im trying to remove the driver side front tire but after removing the 5 lugnuts it will not budge am i missing something?

usually tires are hard to remove specially if it has not been removed recently or been checked recently.try hammering it down with a rubber mallet.just make sure it wont bounce back to you.

Dec 14, 2010 | 2004 Chrysler Concorde

1 Answer

I have a stuck lug nut through the rim into the rear hub due too someone starting the nut with an air gun and cross threading the nut during a tire rotation. How can I get the tire off.

try heating up the bolt with a mapp gas torch and using an air gun to remove it otherwise you may have to take it to your local tire shop and spend roughly $30 on having it removed. to install (once the old one is out) just push it in by hand put your new lug nut on and crank down on it till it reaches the end good luck!

May 10, 2010 | 2005 Volvo XC90

2 Answers

How do you remove wheel lock nuts without a key or bursting them on a 1994 mazda 626 diesel?

Gorilla lock makes special tools to remove these and are available online, or I would suggest just driving to a reputable tire shop in your area and have them remove the 4 lug locks ... I'm sure that they keep these tools handy and would only charge a nominal fee to remove your locks for you.

Dec 05, 2009 | 1994 Mazda 626

1 Answer

How do you change a tire on a honda crv? I need to get the tire off the back door and change the driver side front tire. Where does the jack go?

The owners manual shows where to put the jack. I no manual sometimes there are illustrations where the jack is stored in its compartment. First loosen the lug nuts before you jack up the vehicle, prevents the tire from turning. After jacking up the vehicle finish removing the lug nuts then remove the tire. The spare tire on the door may have a locking lug nut which requires a key to unlock before removing the lug nuts. Key us usually on the ignition key ring. Remove the lug nuts and put tire on the drivers side. Tighten up the nuts on the wheel and after the car is let down from the jack, finish tightening the lug nuts.

Oct 24, 2009 | 2004 Honda CR-V

2 Answers

Tire stuck/lug nuts removed

use 3lb sledge on inner edge of rim be careful not to damage rim rubber mallet won't provide enough shock to loosen rust. ps leave one lug nut on so tire won't fly off.

Nov 16, 2008 | 2005 Dodge Neon

1 Answer


Usually if i cant ORDER a new KEY...;)
Ill try to find a wrench TOP and "AIRGUN" it or VELD a nut on it if theres room!
Orig.BMW has order numbers stamped in the holecenter...real easy!

Sep 27, 2008 | 1996 Volkswagen Cabrio

Not finding what you are looking for?
1999 Toyota Sienna Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides