Question about 1999 Chevrolet Silverado 1500

1 Answer

Where is the connector for an electric brake controler on an07 silverado new body style located

Posted by on

  • work4it1 May 11, 2010

    It should be donw on the left side kick pannel i take it you have the harness that plugs into the truck and if i remembe rright its either gray or brown look for the same color under the dash when you would plug it in

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Its located on the (center ) fuse panel you need the pigtail from chevy it plugs into a place in there and go to the controller

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

93 Chevy Cheyenne gas tank into 83 Silvera


no it will not work as these are 2 different style bodies.the 83 has the tanks on the outside of the frame and no fuel pump in tank.the 93 tank is located inside the frame rails and has a electric pump in the tank.

Mar 06, 2014 | 1983 Chevrolet Silverado

1 Answer

Where is the idle air control valve


Here is a web site to show you a picture of what you are looking for: http://www.theautopartsshop.com/auto+car-usa+parts/ford+focus+idle-air-control-valve.html

Here is how to fix it:

  • Unplug the electrical connector on the IAC valve located on the back of the throttle body near the firewall. No tools are needed to unplug the connector. Squeeze the release tab on the plug and pull to remove it.

  • Unbolt the two 8-mm attaching bolts attaching the IAC valve to the throttle body using an 8-mm socket and socket wrench from the socket set. Remove the IAC valve and gasket from the engine compartment.
  • Position the new valve and gasket in place on the throttle body, and bolt it to the throttle body using the 8-mm bolts and the socket and socket wrench. Avoid over-tightening as the throttle body is easily stripped out by over-tightening the fine-thread 8-mm bolts. Plug the electrical connector into the new valve, and push it on until it snaps into place.
  • Turn the ignition key to the run position but do not start it at this time. Unplug the electrical connector once again, and turn the key off.

  • Start the engine, and adjust the minimum air rate by turning the adjusting screw located on the throttle cable side of the throttle body until the idle speed is 650 rpm plus/minus 50 rpm. Turn the engine off, and plug the electrical connector back in--pushing until it clicks into place.

  • Feb 04, 2011 | 2000 Ford Focus

    3 Answers

    I am trying to loacate the plug for conecting a brake controller to and dont know what it looks like or were it may be located. thanks


    On the new body style F-150, they moved it just a bit ( vs the 97-03 MY and the 2004 Heritage / Lightning models ).<br /><br />It is behind the dash, should be a gray colored connector.<br /><img src="/uploads/images/3052C94.JPG" /><br />

    Aug 16, 2010 | 2004 Ford F150

    2 Answers

    My cruise control doesnt work on my 2004 f150


    Is the switch on the end of the brake master cylinder good? There has been a recall for these I think. Check all fuses? Make sure brake lights operate normally.

    Nov 02, 2009 | 2004 Ford F150

    1 Answer

    Air flow to defrost


    your heater,defrost control modular needs to be tested for funtionallity

    Oct 06, 2009 | 2001 Chevrolet Silverado

    1 Answer

    I do not have power on the aux. terminal in the trailer plug on a 2008 dodge ram. Any ideas?


    You have got 7 pin trailer connector that was included in the optional trailer tow package. This trailer tow package also includes an electric trailer brake wiring provision that terminates at a connector located on top of the large body harness connection under the instrument panel to the left of the break pedal, as well as an electric trailer brake pigtail harness and an instruction card that are stored in the glove box when the vehicle is shipped from the factory. You will need to add an electric brake controller of your choice that will plug-in to the harness and that will also give you power on your auxiliary circuit.

    Oct 04, 2009 | 2008 Dodge Ram Pickup 2500

    2 Answers

    Vehicle engine seems to stall at low revs or approaching a stop, been doing that last few days. Now brakes do not seem to have any power assistance. Any thoughts, think this is now not fuel related and...


    check for a vacuum leak... the brake booster could be bad and need replacing.
    check the vacuum hose that runs from the brake booster to the manifold. Sometimes they crack, leak, or get partially disconnected...the gromet on the booster itself as well.
    Good luck...i hope this helps.

    Jul 19, 2009 | 1996 Jeep Grand Cherokee

    1 Answer

    Head light assy


    new body style or old?
    old body you will see a pin on top of lamp assembly slide pin out and light will come out.
    new body remove two 10mm bolts and lamp will come out

    Oct 21, 2008 | 2007 Chevrolet Silverado 1500 2WD

    Not finding what you are looking for?
    1999 Chevrolet Silverado 1500 Logo

    137 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    63456 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21981 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...