Question about Toyota Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
To program a remote... note that you must not delay more than 10 seconds between any of the operations.
Driver's door open, all other doors closed, key removed from the ignition switch.
Insert key into ignitions switch, then remove it.
Press LOCK then UNLOCK on the vehicle door lock control switch at 1 second intervals 5 times.
close and re-open drivers door.
Press LOCK and UNLOCK on the vehicle door lock control switch at 1 second intervals 5 times
Insert Key into ignition switch.
Switch ignition ON and OFF once to program a remote transmitter code while retaining the original codes or twice to program a remote transmitter code while erasing the original codes. three times to check how many remote transmitters are currently registered, or 5 times to erase all registered codes.
Remove Key from ignition switch.
System should now lock and unlock vehicle. Once, twice or five times depending which mode has been selected. It will lock and unlock one to four times slowly, to indicate the number of remote transmitters registered if you chose option 3.
Press and hold remote transmitter LOCK and UNLOCK buttons at the same time.
Press LOCK remote button for 1 second: System should now lock and unlock vehicle once to confirm, twice to indicate registration has failed.
NOTE: to exit programming mode, close drivers door or insert key in the ignition.
NOTE: a maximum of 4 remote transmitters can be programmed
Posted on Oct 13, 2008
Hi, my name is adam, and i think this trick that i'm about to tell you in you case may work. Have you ever tried to WD-40 the locks before winter or at least once a year? I think that may be the solution to your problem. Thank you and have a nice day!
Posted on Jan 09, 2009
Check this site out
you need the passenger side door lock assembly kit.
There is one posted for sale in the US on this site. just scroll down for the following information and link
Used 1998 Toyota Avalon passenger door lock assembly 1998 Toyota Avalon
passenger door lock assembly
this is the part that surrounds the lock driver side. Car color is green cary, North Carolina 27513
The solenoid or actuator arm for the door lock assembly is probably not working to full spec.
Hope this helps.
Posted on Apr 22, 2009
you have to loosen the mounting bolts on the fuse panel and on the bottom side the fuse is held in by 2 8 millimeter bolts.
Posted on Nov 17, 2009
Testimonial: "Very helpful and exactly right. Saved my neighbor a towing charge to the dealer. His car is back up and running. Thank you!!! "
Tips for a great answer:
Sep 10, 2016 | 1995 Toyota Avalon
May 30, 2014 | 1995 Toyota Avalon
May 18, 2014 | 1995 Toyota Avalon
Sep 28, 2012 | 1995 Toyota Avalon
Jun 29, 2012 | Toyota Cars & Trucks
Aug 25, 2010 | Toyota Avalon Cars & Trucks
Oct 16, 2009 | 1995 Toyota Avalon
Jun 23, 2009 | 2000 Toyota Avalon
Apr 22, 2009 | 1998 Toyota Avalon
Oct 13, 2008 | 1995 Toyota Avalon
43 people viewed this question
Usually answered in minutes!