Question about 2007 Hyundai Tucson SE
The drivers side door lock actuator won't allow the door to unlock. Is there access to the actuator? How about a diagram of the actuator?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
two points 1 replace batterys in fob .2 place key in drivers door and turn this acts as a reset might take a couple of turns.hope this helps you.adrian
Posted on Feb 18, 2009
SOURCE: electric door lock mafunction
Door lock/unlock actuator (motor) has gone bad in the passenger side. Get the actuator from a Hyundai Parts dealer (or junk yard if you trust them) and replace it yourself OR take it to a Hyundai Service Center and they'll do it for you.
Posted on May 31, 2009
You are correct in your assumption about a relay... there are two relays. One is for 'LOCKING' the other is for 'UN-LOCKING.' They are both labeled as "LOCK" relays (1 & 2). You can verify if a relay is bad by swapping one with the other. If the problem moves to 'unlocking' the doors, but will NOW LOCK - the relay is bad. If not, further troubleshooting is necessary.
Posted on Jun 07, 2009
Tips for a great answer:
The passenger door switch (PDS)
The body control module (BCM)
The driver information center (DIC)
The rear door lock/unlock relay (LBEC)
The door lock actuators in each of the doors The rear passenger doors are controlled by the BCM through the rear door lock/unlock relay which is incorporated onto the printed circuit board in the LH BEC. The BCM controls the unlock relay by providing ground to energize the coil and controls the lock relay by providing battery voltage to energize the relay coil. The energized the relay and allows voltage to be applied to either the door lock motor lock or unlock circuits. Since the other side of the door lock actuator is connected to the normally closed contacts of the opposing relay to ground, the doors lock or unlock.
Do you know what the BCM is , body control module ! If you do not know about this stuff I strongly suggest you to it to a ASE certified repair facility ! Save yourself some money an aggravation !
Apr 17, 2015 | 2007 GMC Sierra 1500
Mar 10, 2013 | Cars & Trucks
Aug 28, 2012 | 2000 Mercury Sable
Jun 16, 2012 | Cars & Trucks
Mar 10, 2017 | 2007 Toyota Camry
Feb 24, 2012 | 2003 Hyundai Santa Fe
Aug 18, 2011 | 2000 Ford Windstar
Jul 21, 2011 | Mitsubishi Colt Cars & Trucks
Jun 27, 2011 | 2000 Pontiac Montana
Sep 18, 2008 | 2003 Honda Pilot
291 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: