Question about 1981 Chevrolet Corvette

Open Question

I need a vacuum diagram for a 1981 chevy rochester e2se series carburetor i dont no what vacuum hoses go where on the carburetor

I'm trying to put all the vacume lines in my 1981 straight 6 engine with a rochester e2se series carburetor I need a diagram to put them back on

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
cgtotty
  • 1 Answer

SOURCE: chevy s10 broken vacuum line

The plastic line in the wiring harness goes to the heater controls; and believe it or not , the other end goes to the vacuum tank - but its in the FENDER !!!!! behind the ABS, kinda under the drivers side hood hinge - great place to put one ain't it ? No wonder GM is going broke !! Good Luck

Posted on Dec 25, 2008

Ad
  • 5 Answers

SOURCE: i need a 1987 chevy S10 vacuum hose routing diagram

Go to Autozone.com, become member, will give you repair manual,location of parts,diagrams.

Posted on Apr 09, 2009

  • 1 Answer

SOURCE: need vacuum hose diagram for 1988 chevy s10 v6

If you dont want to spend the money on the book go to your local libary you can check out chilton book or make a photo copy of the diagrams you need from the book.

Posted on May 05, 2009

  • 1201 Answers

SOURCE: where does the vacuum advance line go on an old rochestor carb

Get a tee fitting for the size of the vaccum line and connect the advanced line into an existing line from the carb. Worked for me on one of my old cars.

Posted on May 31, 2009

  • 6 Answers

SOURCE: vacuum hose diagram for a 2001 Chevy Blazer

look on google i can fing everything there if you want email me with your emailaddres i will try to find it for you

Posted on Feb 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do the hoses connect to on 4 bbl rochester carburetor, it has no hoses attached, on my 79 350 motor


1979 chevy C1500
the vacuum setup varies,
by (california, Federal (USA) and export models)
where are you, or if in USA the under hood sticker shows if calif.or not.

if in usa, use the FSM (buy one used) or use alldata.com
on USA cars , (not sure starting year, this one is old) the vacuum
map is on the underside of the hood. (not not painted over,etc)

Jul 01, 2014 | 1978 Chevrolet C1500

1 Answer

57 chevy pickup, 6 cyl.. Rochester one barreled carburetor rebuild instr. Thank you


Instructions and an exploded, numbered diagram will be included with a carburetor rebuild kit. You take it apart by the numbered diagram, clean everything with carb cleaner, make sure all passages are clear and not blocked, then put it back together by the numbered diagram in exact reverse of disassembly. Make all adjustments as you go along as the instructions dictate (like float level). When done, a new base gasket, torque down the mounting nuts, and make final adjustments.

Aug 28, 2013 | Cars & Trucks

1 Answer

Need a diagram for vaccum advance for a GMC truck 1981 350 engine 2bbl carb


The vacuum signal for the advance needs to come from a ported vacuum source on the carburetor, and not from manifold vacuum. Ported vacuum means little or no vacuum at idle, because the throttle plates at idle shut off the ported vacuum hole. Look for a vacuum tube coming from near the base of the carburetor.
I have no resource to find a diagram. You may need to check a repair manual that your local library might have. Or purchase a Haynes or Chilton manual for around $25. Or join a forum for older Chevy/GMC trucks; somebody there could help you, I'm sure. Good luck.

Jul 08, 2012 | GMC C1500 Cars & Trucks

1 Answer

Do you know where i can find a 'vacuum diagram' for a turbo 350 transmission (1980 chevy blazer...stalls when you put it in gear)


There is usually only one vacuum connection on a turbo 350. It connects to the modulator valve on the side of the transmission. This valve uses engine vacuum to determine transmission shift points. The other end usually connects to a direct engine vacuum source. A "direct source" is a hose connection on the throttle body that has a vacuum signal available at idle. If it doesn't, then it's considered a "ported source".I have had some experience with the chevy blazer/gmc jimmy series, both the early large body models and the small body versions. The stalling when put into gear complaint is most likely caused by a bad intake gasket which is common on the older versions with the small block V8 motors. The newer versions with the vortek motors also had allot of trouble with throttle body gaskets. If these problems have not already been addressed, then there's a good chance that it will take care of the problem. Other possible sources of vacuum leaks are the pcv hose that is hard and brittle. Check the hose out carefully, especially the side that normally faces the engine. Check the throttle body bolts (carburetor bolts) for tightness. I hope that this information is helpful to you. Thank you for using Fixya.com.

Jun 07, 2011 | 1985 Chevrolet S-10 Blazer

1 Answer

How to install 1988 chevy monte carlo rochester 4 barrel carburetor


You'll need to disconnect the fuel line at the front of the carburator. Disconnect the vacuum line at the back of the carburator going to the brake booster. Label and remove the vacuum hoses. Unplug the mixture control solenoid connector, the TPS connector and the connector to the automatic choke. Unbolt the 4 13mm bolts holding the carburator to the intake and remove the carburator.

Apr 23, 2010 | 1988 Chevrolet Monte Carlo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...