Question about 1998 Honda CR-V

Open Question

How to replace side marker lamp bulb on a 1998 Honda crv

Trying to replace bulb for side marker lamp on 1998 Honda crv. How to access back of lamp.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 77 Answers

SOURCE: '04 honda crv bulb change

Its a 5 Watt light bulb. Just pull it out and take it to the store with you. Just remove the license plate to get to it.

Posted on May 21, 2009

Ad
philschneide
  • 448 Answers

SOURCE: replace fog light bulb for 2006 Honda Odyssey

Touring Model
Use a wrench to remove the mounting bolt from the underbody through the hole in the splash shield.
Remove the fog light assembly from the bumper by pulling its inner edge first, then the whole assembly out of the bumper.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
Remove the bulb from the fog light assembly by turning it one quarter turn counterclockwise.
Push the electrical connector onto the new bulb.
Turn on the fog lights to test the new bulb.
Reinstall the fog light assembly into the bumper. Tighten the mounting bolt.
Insert the new bulb into the assembly and turn it one-quarter turn clockwise to lock it in place.
Hope this helps you.

Posted on Nov 22, 2009

Sebin
  • 712 Answers

SOURCE: 1998 honda crv abs light stays on

HAVE A MECHANIC SCAN YOUR ABS SYSTEM THROUGH THE ECM. IT IS MOST LIKELY A FAULTY WHEEL SPEED SENSOR OR MAY BE THE ABS HYDRAULIC MODULATOR ITSELF.

Posted on Feb 05, 2010

  • 3 Answers

SOURCE: How to change the whole headlight assembly on a 05 Honda CRV

You have to remove the front bumper and grill etc

There are 5 bolts holding the headlight assembly in place. 2 at the top and 3 underneath.

Remove the plastic cross piece by prising out the clips and then the grille clips too then unbolt the bolts eithr side under the wheel arch. The bumper is still fastened using cips. Pull the bumper forward to unclip.

Posted on Feb 19, 2010

SOURCE: WHERE IS HONDA CRV TAIL LAMP FUSE

hi,
i have provided the picture showing the location of tail lamp fuse for Honda. I have marked it too for your reference. Please rate my solution as helpful.Have a nice day!7c6a615.jpg

Posted on Mar 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the tail light fuse on a 2010 crv


Fuse#23 in the under dash fuse box is for the tail lights, controls license plate lamps and side marker lamps as well.
f
if you meant brake lamps it's fuse 12 in the under hood fuse block.

Mar 13, 2014 | 2010 Honda CR-V

1 Answer

Marker lights wont go on


on 1998 and earlier models, the side marker light housing is located next to the headlight housing. Remove the screws and pull out the housing to access the bulbholder on the back of the housing. On 1999 and later models, the park and turn signal bulbs are located in the bottom of headlight housing. Twist the bulbholders out to replace the park or turn signal bulbs. Installation is the reverse of the removal directions.

Apr 04, 2013 | 1995 Jeep Grand Cherokee

1 Answer

How do you release the headlight retaining clip on 1998 crv


Click HERE to view video of a 2000 CRV bulbe replacement , it is the same.

Feb 22, 2012 | 1998 Honda CR-V

1 Answer

I Need to replace the turn signal side marker lamp on a 1995 honda civic 4 door.


You have to look under the car and find the lamp connector. Turn it, and remove it from the hole it is in. Replace the bulb and reinsert the assembly back into the hole you removed it from. Don't forget to turn it until it locks in place. Hope this helps you out.

Aug 25, 2011 | 1995 Honda Civic

1 Answer

I have a honda crv 2011, the rear marker lights were out. To troubleshoot the issue, I pulled all of the fuses one by one in the fuse box under the hood and under the dash and found a broken fuse. Replaced...


You will probably need a scanner or code reader to erase the fault you introduced by removing the fuses.

Next time use a test lamp to check your fuses.

Sep 28, 2017 | Honda CR-V Cars & Trucks

2 Answers

My rear marker/ running lights are out and i need to know how to get to them


Signal and Marker Lights Removal & Installation To Remove:
  1. Remove or disconnect the following:
    • Screw from the side marker lamp.
    • Side marker lamp from the front and/or rear bumper fascia.
    • Bulb/socket from the side marker lamp.
    • Bulb from the socket.
To Install:
  1. Install or connect the following:
    • Bulb to the socket.
    • Bulb/socket to the side marker lamp.
    • Side marker lamp to the front and/or rear bumper fascia.
    • Screw to the side marker lamp. Tighten to 2 N.m (18 lb in ).
prev.gif next.gif

Jan 08, 2011 | 2002 Pontiac Sunfire

1 Answer

Honda CR-V 1999: how to access front park lamp to change


Don't call me Surely (little joke there) but indeed, the fender/mud guard have to be dealt with. Here's the procedure:
1. If you are changing the bulb on the driver's side, start the engine, turn the steering wheel all the way to the right, and turn off the engine. If you are changing the bulb on the passenger's side, turn the steering wheel to the left.
2. Use a flat-tip screwdriver to remove the fastener from the inner fender.
3. Pull the inner fender cover back.
4. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise.
5. To remove the turn signal/side marker bulb, push it in slightly and turn it counterclockwise. To remove the parking light bulb, pull it straight out of its socket.
6. Install the new bulb in the socket.
7. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place.
8. Test the lights to make sure the new bulb is working.
9. Put the inner fender cover in place. Install the fastener and push on the center until it locks (the center is flush with the head).
Hope this helps you deal with it.

Dec 06, 2009 | 1998 Honda CR-V

1 Answer

Iv a honda crv 1999 model but cant work out hoy to change the front side lights


The side marker and corner turn signal lamps are incorporated into the headlamp assemblies.
Raise the hood and look behind the lamp asseblies for the mounting screws. They are very difficult to reach and one is behind the fender liner which you can release in part from inside the wheel well. Be patient and thorough.
I like to replace all the lamps in the assembly when I have it out.

Jul 07, 2009 | 1999 Honda CR-V

2 Answers

How to change the whole headlight assembly on a 05 Honda CRV


You have to remove the front bumper and grill etc

There are 5 bolts holding the headlight assembly in place. 2 at the top and 3 underneath.

Remove the plastic cross piece by prising out the clips and then the grille clips too then unbolt the bolts eithr side under the wheel arch. The bumper is still fastened using cips. Pull the bumper forward to unclip.

Dec 23, 2008 | 2005 Honda CR-V

1 Answer

How to replace Marker lamp in 1999 Toyota Corolla


Open the hood. Observe the area above the right headlamp, close to the fender. You will see a phillips screw that holds a plastic tab. Remove the phillips screw. After removing the screw, pull the marker lamp assembly towards you. It may be real tight, if it has never been removed before. You need to pull the light assembly out of 2 retention sockets behind the marker lamp. Rotate the bulb socket to get to the bulb, replace the bulb, & slide it back in.Easy job.

Oct 21, 2008 | 1998 Toyota Corolla

Not finding what you are looking for?
1998 Honda CR-V Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...