Question about 2006 Toyota Hilux 3.0
Bumper has dent from hitting a tree
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there are two bolts to the center and two around the corner on at the edge up high and one at the bottom of the bumper/ Please rate my response thank you very much
Posted on Feb 01, 2009
you can heat the bumper heat gun ( you can rent one i think?)
this will soft the bumper so you push it out easily on the car
1. inside your trunk remove small back clips in trim panel
2. remove tail lamp four 8mm nut perside unplug wires
3. remove black clips under tail lamps ( flat head screwdriver to pull center of the clip up slowly then remove the hole clip)
4. three if the some clips are bottom if the bumper
5. three or four 10mm nuts in side the quarter panel on the right and left side
6.four s shape clips are top bumper that will pull loose
7. with some help slide bumper by pulling it off it
8. when you reinstall the bumper you may need to tape the strophe reinforcement in place
Posted on Feb 24, 2009
SOURCE: Toyota Sienna bumper dent
These vans have a styrofoam bumper wrapped in semi-rigid plastic. When you dented the bumper you probably dented the styrofoam as well, so depending on how deep the dent is you may not be able to bring it back to normal.
The surest way to fix the dent would be to remove the bumper by unbolting it, then taking out the styrofoam and pushing out the dent.
Posted on Aug 11, 2009
Go to this site. http://www.yarisworld.com/forums/showthread.php?t=33767
Further down you will see a diagram of the bumper removal.
remove the two bolts under the hatch, the four plugs along the bottom edge, and the plate light. Don't forget the red circle clip or bolt on the diagram. Then you just pull it off.
Posted on Dec 01, 2011
Tips for a great answer:
May 03, 2015 | 1993 Ford Mustang
Dec 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars
Jul 01, 2009 | 2000 Toyota Corolla
Jun 01, 2009 | 2007 Saturn Outlook
Apr 03, 2009 | 2006 Toyota Sienna
Sep 30, 2008 | 2006 Kia Sportage
77 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: