Question about 2003 Cadillac CTS

Open Question

What tools do i need to replace starter on 2003 cadillac cts?

Need to replace starter very difficult to get bolt off! what size torque do i need to remove this

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
dealt_soul
  • 296 Answers

SOURCE: 2003 cadillac cts coolant temperature sensor

I cant find a pic of the loctation.

It is under the intake in the back in the coolant bridge it is not bad to change if you are not affaid to take the intakes off but to get to it you have to take the intake off

Posted on Jan 19, 2009

Ad
  • 1 Answer

SOURCE: 2003 Cadillac CTS 6-CD changer, clicking noise cd's stuck inside.

I had the same problem. You have to take it to the dealer and they have a trade-in program. I forget what the price was, it will cost you around $400 and the unit they will put in is refurbished. But I have not had any problems with the refurbished unit. They have known about the problems with the CD player but it still costs the consumer money.

Posted on Apr 05, 2009

  • 1 Answer

SOURCE: CD Mechanical Error on 2003 Cadillac CTS

take the radio apart and take them out one by one, i just fixed my yesterday

Posted on Sep 18, 2009

  • 117 Answers

SOURCE: Replace 2005 Cadillac CTS water pump

drain the coolant.remove belt by rotating belt tensioner cllockwise. water pump pulley will require a holding tool to keep it from turning while removing bolts. access to air ratchet can sometimes eliminate the need to hold but be careful cause thats a good way to skin some knuckles. also make installation more difficult to obtain proper torque. after pulley is off just a few water pupm mounting bolts remain. clean and dry gasket surface very well before reinstalling.

Posted on Nov 07, 2009

Testimonial: "Very quick with a response, and good info!"

  • 12166 Answers

SOURCE: 2003 cadillac cts v6 3.2 liter. white smoke

u have a leak in the heater core the oily smell and mist is anti freeze sounds like a small leak because usually u would have a wet floor if it was large -two choices check and repair as necessary the core or can use an additive with a stop leak they usually work well on small leaks

Posted on Dec 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cts03 3.2 What's the best way to get to starter?


Jack the vehicle up an crawl underneath on the passenger side ! Don't forget to disconnect the negative battery cable .
Removal Procedure
  1. Remove the starter heat shield. Refer to Starter Shield Replacement .
  2. Remove the right side engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .
Engine Mount Bracket Replacement - Right Side
Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the right catalytic converter. Refer to Catalytic Converter Replacement - Right Side in Engine Exhaust.
  3. Remove the starter motor heat shield. Refer to Starter Shield Replacement in Engine Electrical.
  4. Install a screw jack with a block of wood under the oil pan for support.
    showgif.do?image=816388
  5. tif.gif
  6. Remove the right engine mount upper retaining nut.
A lot of work !!!!!! Taking to a qualified repair shop mite be worth it .
Labor $174 - $222

Sep 19, 2016 | Cadillac CTS Cars & Trucks

2 Answers

What is the torque on the bolt to replace camshaft sensor on 2003 cadillac cts?


there\'s \'nippidy-nip\' tight(platic cover bolts) , there\'s tight( coil bolt), there\'s tight tight( brake caliper bolt), there\'s Eff Tee tight(tight - suspension bolts), and there\'s might be beyond. Yours is just \'tight\'.

If you use a 1/4 socket set just give it 2-3 pound of torque at the end of the handle.

Jun 11, 2014 | 2003 Cadillac CTS

1 Answer

Don't know where camshafts r place


why dont you look in the service manual . hopefully for the sake of your engine heads you have a service manual because if you didnt torque the head bolts it the proper sequence and to the correct torque specs then you have trashed the brand new head gaskets and more than likely have warped the heads .

Dec 12, 2013 | 2003 Cadillac CTS

1 Answer

How to take out a torque converter flywheel out of a 2003 cadillac cts


You must remove the transmission first, a job best left to a professional as it requires allot of special equipment.

Aug 21, 2012 | 2003 Cadillac CTS

2 Answers

Locating fuel filter on 2007 cadillac cts


How to change a fuel filter on a 2003 Cadillac CTS - YouTube

? 11:01
https://www.youtube.com/watch?v=SRI7SPzVzvk
Jun 2, 2014 - Uploaded by 2LateIWon
How to change a fuel filter on a 2003 Cadillac CTS. ... Lately... my 2007 cadillac CTS (just hit 100,000 miles) tends to shake for may a second if ...

Jan 05, 2012 | 2007 Cadillac CTS 3.6L

1 Answer

How difficult and how long do it take to change the thermostat on the cooling system on a 2004 Cadillac CTS


NOT A HARD JOB.DRAIN OUT SOME OF YOUR COOLANT UNTIL BELOW THERMOSTAT.REMOVE RADIATOR SUPPORT COVER THEN REMOVE THE AIR FILTER HOUSING.THEN LOOSEN REMOVE HOSE CLAMP TO THERMOSTAT HOUSING.THEN REMOVE THERMOSTAT HOUSING AND THERMOSTAT.THEN INSTALL NEW THERMOSTAT WITH NEW O RING ON THERMOSTAT. LUBRICATE NEW O RING.BESURE INSTALL NEW THERMOSTAT WITH THE SPRING END ON THE INSIDE OF THE HOUSING.TORQUE THERMOSTAT HOUSING BOLTS TO 89 INCH POUNDS.

Mar 01, 2011 | 2004 Cadillac CTS

2 Answers

2003 cts power seat does not travel forward or back


i have a caddilac cts and my passenger seat does not work anyone has an idea on what it can be?

Nov 20, 2009 | 2003 Cadillac CTS

2 Answers

Replace 2005 Cadillac CTS water pump


drain the coolant.remove belt by rotating belt tensioner cllockwise. water pump pulley will require a holding tool to keep it from turning while removing bolts. access to air ratchet can sometimes eliminate the need to hold but be careful cause thats a good way to skin some knuckles. also make installation more difficult to obtain proper torque. after pulley is off just a few water pupm mounting bolts remain. clean and dry gasket surface very well before reinstalling.

Nov 07, 2009 | 2005 Cadillac CTS

2 Answers

CTS rear back side window - how to replace


Tire Size P225/55R-16

**** / Florida

Sep 03, 2008 | 2003 Cadillac CTS

Not finding what you are looking for?
2003 Cadillac CTS Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...