Question about Hyundai Cars & Trucks

Open Question

How To Remove The B Pillar Interior Panel On A santafe 2009

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

oldfishead
  • 155 Answers

SOURCE: remove and replace passenger door mirror on 2009

  1. Remove the front door trim panel handle bezel cover.
  1. Remove the front door trim panel handle bezel screws.
  1. Remove the front door trim panel lower screws.
NOTICE: To avoid damaging the front door trim panel, do not pull the bottom of the panel outward.
  1. Remove the front door trim panel by lifting upward on the armrest to disengage the panel clips.
  1. Disconnect the electrical connectors.
  1. Disconnect the lock rod cable from the front door trim panel.
  1. Disconnect the door handle conduit and cable from the front door trim panel.
  1. To install, reverse the removal procedure.

be patient during these procedures to not damage the trim panel...they cost $150>275 ec........GL hope this helps

Posted on Jul 06, 2009

  • 149 Answers

SOURCE: remove 2004 Dodge Grand Caravan D-pillar panel

To remove the panel completely. You must remove all screws & the seatbealt bolts for the 2nd & 3rd seats

Posted on Jan 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing quarter glass on left side on 2005 pontiac gto


Remove the door opening weather-strip. Refer to Door Opening Weatherstrip Replacement in Doors.
Remove side sill trim plate. Refer to Door Sill Plate Replacement in Interior Trim.
Remove the lower quarter panel trim. Refer to Rear Quarter Trim Panel Replacement in Interior Trim.
Remove the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement in Interior Trim.
Remove the quarter upper trim panel. Refer to Rear Quarter Upper Trim Panel Replacement in Interior Trim.
Remove the center pillar outer applique. Refer to Center Pillar Applique Replacement in Exterior Trim.
Remove the roof drip molding. Refer to Body Side Roof Drip Molding Replacement in Exterior Trim.

Important: It is necessary to use new nuts when reinstalling the quarter window.
Remove the nine quarter window nuts (1), securing the quarter window assembly (2) to the body opening.
Caution: When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.
Important: When removing the quarter window from the body opening make sure that the attaching pins are clear of the outer body.
Remove the quarter window (2) from the body opening.

Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
Remove the rear seat back. Refer to Rear Seat Back Replacement in Seats.
Remove the door sill plate. Refer to Door Sill Plate Replacement .

Remove the 3 quarter trim panel retaining screws (1).
Starting at the lower edge of the trim panel and moving alternately clockwise and counterclockwise, pull outward on the trim panel to disengage the eight rear quarter trim panel attaching clips (2).
Remove the quarter trim panel from the vehicle.
Remove the 4 radio speaker grille speed clips (1), securing the speaker grille.
Remove the speaker grille (2).
Remove the rear quarter trim panel insulator (1), from the back of the quarter trim assembly (2).
Remove 7 rear quarter trim panel armrest retaining clips (1).
Remove 7 rear quarter trim panel armrest retaining nuts (2).
Gently pry the quarter trim panel armrest insert assembly (3), away from the rear quarter trim panel and remove.

You mite look for a video on youtube !

Dec 23, 2016 | Pontiac Cars & Trucks

1 Answer

My 1999 Jeep Grand Cherokee Limited sun roof does not want to open.


If your motor is audible and your fuses and connectors are okay, you may have to take a close look at the plastic gear parts up in the roof. The nylon parts do wear out since they are in the roof and more exposed to different temperatures. If any of that mechanism fails then your sunroof will stop working even if the motor is still good. It is a bit of a PITA to get to it since you will have to remove the headliner to get at the mechanism and then identify the worn part and replace it CAUTION: The sunroof system is timed from the factory so that the motor shuts off automatically when the sunroof window reaches a certain position. Extreme care must be taken when removing the motor, timing may be thrown off causing possible damage to the sunroof system. Anytime the motor is removed from the sunroof assembly the sunroof glass panel must be in the FULLY CLOSED POSITION or the unit will be out of timing. The drive motor cannot be reset to the park position after being removed.
CAUTION: The sunroof motor should only be powered through the vehicle battery and sunroof wire harness. Applying power to the sunroof motor leads will cause failure of the control module.
Move glass panel to the fully closed position.
Move glass panel to the fully closed position.
Remove the A-pillar trim. (Refer to 23 - BODY/INTERIOR/A-PILLAR TRIM - REMOVAL)
Remove the B-pillar upper trim. (Refer to 23 - BODY/INTERIOR/B-PILLAR UPPER TRIM - REMOVAL)
Remove the C-pillar trim. (Refer to 23 - BODY/INTERIOR/C-PILLAR TRIM - REMOVAL)
Remove the D-pillar trim. (Refer to 23 - BODY/INTERIOR/D-PILLAR TRIM - REMOVAL)
Remove the sunvisors. (Refer to 23 - BODY/INTERIOR/SUN VISOR - REMOVAL)
Remove the overhead console. (Refer to 8 - ELECTRICAL/OVERHEAD CONSOLE - REMOVAL)
Disconnect the control switch wire connector.
Remove headliner as necessary to gain access to sunroof drive motor. Refer to Headliner Removal and Installation for proper procedures.
Disconnect the drive motor wire harness connectors (Sunroof Drive Motor and Express Module).
Remove drive motor fasteners and remove motor from the sunroof housing

Sep 29, 2016 | 1999 Jeep Grand Cherokee Limited

1 Answer

Where are drains located on a 2003 chevrolet impala sunroof?


They go down inside front A pillar an inside rear D pillar . To get at them you need to take trim off an the headliner down .
Sunroof Housing Rear Drain Hose Replacement (Impala)
Remove the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim. Remove the rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement in Interior Trim. Disconnect the rear sunroof drain hose from the sunroof module rear spigot. Remove the tape from the rear sunroof drain hose tube.
Disconnect the rear sunroof drain hose from the rear sunroof drain hose tube. Remove the rear sunroof drain hose tube from the upper retainer clip. Remove the rear sunroof drain hose from the rear pillar
The front is simalier .

Dec 22, 2015 | 2003 Chevrolet Impala

2 Answers

Where do I add washer fluid for rear window wiper on a 2000 blazer


Open the hatch and look for the fill cap along the sides .

Oct 23, 2015 | Cars & Trucks

1 Answer

2006 Tahoe. Where is the auxiliary blower motor located?


It is located behind the right rear quarter panel , In the back right of the interior !
Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side in Interior Trim.
Removal Procedure
  1. Remove the rear seat. Refer to Rear Number 2 Seat Replacement or Rear Number 2 50-50 Seat Replacement in Seats.
  2. Remove the Third Pillar trim panel. Refer to Third Pillar Trim Replacement .
  3. Remove the garnish molding. Refer to Body Rear Corner Garnish Molding Replacement .
  4. Remove the door sill plate. Refer to Liftgate Door Sill Plate Replacement .
  5. Remove the quarter panel trim screws.
A lot involved in this but not to difficult !
  1. Remove the rear door sill trim plate. Refer to Front Side Door Sill Plate Replacement or to Rear Side Door Sill Plate Replacement .
  2. Remove the lower rear seat belt cover and bolt.
  3. Remove the trim panel from the vehicle.
Remove the sill plate. Firmly pull the sill plate up and out from the retainers.
Remove the sill plate from the vehicle. Start from the front of the door sill. Use a flat-bladed tool in order to pry the door sill plate.
Rear Side Door Sill Trim Plate Replacement
Use a flat-bladed tool in order to pry the door sill plate. Remove the sill plate from the vehicle.
Body Rear Corner Garnish Molding Replacement
Remove the rear upper garnish molding. Refer to Rear Upper Garnish Molding Replacement .
Pull down on the upper corners of the garnish molding in order to disengage the retaining clips. Pull in order to disengage the remaining retaining clips. Remove the rear corner garnish molding from the vehicle. Inspect the rear corner garnish molding for broken or missing retaining clips. Replace the retaining clips as needed.
Good Luck ! Fun job !!!!!

Jun 07, 2015 | 2006 Chevrolet Tahoe

1 Answer

How to remove sunroof that does not retract


grinding along the track could mean that one of the cables are worn out. Not sure if it is a replacement part, but you can find out at a Mercedes Parts dealer.
to remove the sunroof, you will need to remove all the pillar panels in the interior (A, B and C pillars), after that you need to remove the roof panel in the interior. once you have done that you will have access to the sunroof.

Aug 12, 2014 | 2005 Mercedes-Benz CLK 320

1 Answer

How do i remove left sail panel on 1999 ford mustang


Remove the upper interior panel pieces; unscrew the coat hook, remove seatbelt from door jam pillar, remove plastic cover (snaps into place). After this you will see the nuts needed to remove the sail panels

May 27, 2012 | Ford Mustang Cars & Trucks

1 Answer

Where is the interior trim code located on a 2009 sonata?


There are a few labels & a plate on the driver's door "B" pillar (below the door latch bolt). The black plate will give you two different paint codes. One for Interior and another for Exterior.

Mar 23, 2011 | 2009 Hyundai Sonata

1 Answer

Remove 2004 Dodge Grand Caravan D-pillar panel


To remove the panel completely. You must remove all screws & the seatbealt bolts for the 2nd & 3rd seats

Oct 13, 2009 | 2004 Dodge Grand Caravan

1 Answer

Headliner removal


this is not an easy repair w/o damaging the headliner. There is nothing up there except maybe a roof brace. Check the luggae rack again by trying to move all the peices. One must be loose.
there are 27 steps!
If equipped, remove the overhead console.
  1. Remove the screw and disconnect the electrical connectors
  2. If equipped, remove the electronic compass sensor.
  3. If equipped, disconnect the auto dimming interior mirror connector.
  4. Remove the interior/map reading lamp. For additional information, refer to Section 417-02 .
    • Upon installation, make sure the notch in the headliner aligns with the tab on the interior/map reading lamp bracket.
  5. Disconnect the roof opening panel electrical connector and the wire connector pin-type retainer.
  6. Remove the gimp around the roof opening panel.
    1. Remove the sun visors. For additional information, refer to Sun Visor in this section.
    1. Position aside the door opening weatherstrips
  7. NOTE: Installing the LH side sun visor clip will support front of headliner while working on headliner.
    Install the LH side sun visor retainer clip.
    • Loosely install the screw.
  • Disconnect the electrical connector and the wiring pin-type retainers on the A-pillar.
    1. Release the upper B-pillar trim panel clips and position aside the upper B-pillar trim panel.
    Release the C-pillar trim panel clips and position aside the C-pillar trim panel
    1. Remove the rear upper headliner trim panel.
    2. Remove the D-pillar trim panel.
    Vehicles with rear climate control
    1. Remove the rear auxiliary A/C controls.
      • Disconnect the electrical connectors
    2. Position aside the LH rear quarter trim panel.
    3. Disconnect the electrical connectors.
    4. Remove the pin-type retainers and the upper air duct.
      • Push down on the air duct, tilt the top outward and pull upward to remove the air duct
    5. Remove the lower air duct.
    6. Disconnect the electrical connector located at the C-pillar.
      • Release the wiring harness pin-type retainers.
    7. : To prevent damage to the coat hanger retainer, use a 3/16-inch flat-blade screwdriver for this step. Remove the third row coat hooks.
      • Open the access cover.
      • Insert a screwdriver into the coat hook slot and turn the screwdriver 90 degrees so that it engages in the plastic component slot. This will spread the steal attachment clip wings to allow the plastic component to disengage. The steal clip will stay engaged in the sheet metal.
    8. Remove the rear headliner pin-type retainer.
    9. NOTE: An assistance is required to help support the center of the headliner for the remaining steps.
      1. s2n~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: To prevent damage to the coat hanger retainer, use a 3/16-inch flat-blade screwdriver for this step.
        Remove the second row coat hooks.
        • Open the access cover.
        • Insert a screwdriver into the coat hook slot and turn the screwdriver 90 degrees so that it engages in the plastic component slot. This will spread the steal attachment clip wings to allow the plastic component to disengage. The steal clip will stay engaged in the sheet metal.
      2. Remove the LH side sun visor retainer clip.
        • Open the access cover and remove the screw.
      3. NOTE: Rear seats must be folded down and front seats reclined back for this step.
        Tilt the RH side of the headliner upward and remove the headliner from the rear of the vehicle.
    good luck

    Dec 14, 2008 | 2002 Ford Explorer

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    86 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8140 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...