Question about 2007 Mazda MPV

Open Question

2007 mazda 5 2.0 diesel sport timing belt

When are timing belts due

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76691 Answers

SOURCE: Timing Belt 2002 Mazda 626

re-install belt, lining up the timing marks, crank to TDC #1 cylinder, cma pulleys have marks on them, line them up to the index marks as well. If you have a drive wheel in the air, you can pop the car into 5th gear (make sure it's chocked!) and rotate the wheel to turn the engine for alignment, etc. You can put a wrench/socket on the cam bolt to align it as well.

Posted on Aug 08, 2008

Ad
  • 1 Answer

SOURCE: mazda 6 timing marks

You are all fuckin thick. ask a question on here and get answers like this ********

Posted on Nov 06, 2008

  • 19 Answers

SOURCE: mazda 6 ts 2.0 diesel

Bro, you can check this by removing the front upper cover of your engine. If you see a chain, then it's chain driven but if you see a rubber belt that has gear like teeth on its inner surface then, it's a belt.
Bro I really don't kow how much it costs, kindly check the website of your car manufacturer and go to costumer support.

Posted on Nov 06, 2008

  • 1 Answer

SOURCE: How much should I reasonably

replacement of timing belt $350-$500. aftermarket shops will try to sell you a package containg a belt, water pump, and tensioner pulley. the dealer will just replace the belt, they might recommend to replace the water pump if there are alot of miles on the car, they will also inspect the pulley for wear.

Posted on Jan 09, 2009

steve_baldam
  • 52 Answers

SOURCE: timing belt broke on mazda 5

Think you have to put a flat bar across the back of the cam shafts same as the old ZETEC ford motors. Failing that are the vernier pullies marked with eithr O T or do they have a - or a . that line up with a position on the end of the cylinder head.

Posted on May 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does my 1.9 diesel Suzuki grand vitara have a timing belt or timing chain


nice to know year, and country, ? this is USA forum
1999 to 2017 , why make this so hard?
1.9 DDS or not DDS?
5ways to know that.
1:look on the suzuki site, and pretend to buy that part,'
2: buy the book there, the service manual.
3: buy part in any online store, look for said part.
4: google that engine,but....
5: tap tap tap front cover, metal? chains or gears, plastic= belt

but no year stated making the below impossible
"Pre 2001 turbo diesel models were fitted with Mazda Diesel engine, with later models fitted with a turbo diesel engine (4 cyl. 1.9L 129 hp (96 kW) manufactured by Renault)"
TRAFIC?
or MEGANE?2010 up
the renault is SOHC engine,;head , early had belt.
the 2010 up is sold by GATES,
best i can do, with only displacement of engine.



2010-umgzikckord4pbcxjbxc4rwc-2-0.jpg

2008-umgzikckord4pbcxjbxc4rwc-2-2.jpg

Feb 09, 2017 | Suzuki Grand Vitara Cars & Trucks

1 Answer

Why does my mazda 6 squeaks in hot weather


The usual reason is the belt that drives the A/C compressor is loose. Sometimes the issue is a tensioner pulley bearing is worn out. May also be the belt that drives the alternator. When the extra load of the compressor or the current to drive the A/C fans engages, the belt will slip and squeak. Adjust or replace the belt(s).

Oct 25, 2014 | 2007 Mazda 6 Sport

1 Answer

How do I bypass the ac compressor with a new serpentine belt? the ac isn't necessary so we are removing the compressor and are wondering what belt to put on after, so it's not really bypassing, just s


Can't you just unplug the ac unit and keep the same belt? that would save you from having to change the original belt. which will make it a lot easier then trying to re-invent the wheel.

Sep 09, 2014 | 2007 Mazda 6 Sport

1 Answer

Timing belt same clicking noise 2007 mazda cx7


vvt actuator and you are driven by timing chain not belt common problem in cx-7

Feb 11, 2011 | 2007 Mazda CX-7 Grand Touring

1 Answer

Timing belt replacement; when?


usually 60 -90k miles . should be in your owners manul, start looking at 60k service and go up from there.

Sep 26, 2009 | 2007 Mazda MX-5 Miata Touring Convertible

1 Answer

Timing Belt replacement- two recomendations by mazda manual


they are good for well over 100k. If your engine is freewheeling (that is - if belt does break, no valve will hit the psiton), I would just keep driving it until it breaks or never does.
I am driving my 93 Villager until it breaks. over 150k right now, freewheeling engine.

As for cost, about $400 is my guess.

Ask your dealer service dept if it's freewheeling. check your owner manual too.

May 27, 2009 | 2002 Mazda Protege

2 Answers

Ford R2 diesel timing belt installation


i am curious... what year is this van... and what diesel engine does it have. i am a professional diesel mechanic that specializes on ford engines and i never herd of an R2 engine. it has got to be a 6.2l, 7.3l or 6.0l engine... at any rate none of these engines have a timing belt... unless you have some kind of import model that i am not familiar with. if that is the case them i will try to find out all the info i can.

Oct 26, 2008 | Ford E-Series Cars & Trucks

1 Answer

Serpentine belt diagram for a 5.9 diesel with air and 9 pulleys


5.9L DIESEL
196759.jpg The 5.9L diesel engine accessory drive system (with a/c) consists of :
  1. Generator Pulley (1)
  2. Water Pump Pulley (2)
  3. Idler Pulley (3)
  4. Power Steering Pump Pulley (4)
  5. Radiator Fan Pulley (5)
  6. Crankshaft Pulley (6)
  7. Automatic Tensioner (7)
  8. A/C Compressor Pump Pulley (8)
CAUTION: When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating in wrong direction. Refer to or for correct engine belt routing. The correct belt with correct length must be used.
1. Position drive belt over all pulleys except water pump pulley. 2. Attach a 1/2 inch ratchet to tensioner.


196757.jpg The 5.9L diesel engine accessory drive system (without a/c) consists of :
  1. Generator Pulley (1)
  2. Water Pump Pulley (2)
  3. Idler Pulley (3)
  4. Power Steering Pump Pulley (4)
  5. Radiator Fan Pulley (5)
  6. Crankshaft Pulley (6)
  7. Automatic Tensioner (7)
3. Rotate ratchet and belt tensioner clockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove ratchet. Be sure belt is properly seated on all pulleys.

Sep 13, 2008 | 2008 Dodge Ram 3500

Not finding what you are looking for?
2007 Mazda MPV Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...