Question about 1992 Isuzu Pickup

Open Question

I need a diagram, for clutch pedal assembly on a 92 isuzu pup

This is a free job my husband is doing and I don't want to buy a Chilton Idiots guide...just need the diagram for the clutch assembly.

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 409 Answers

SOURCE: clutch assembly

Just put it back the same way you took it off. If you buy the right clutch kit (Sachs I think) it should come with a disc alignment tool. Remember to tighten the pressure plate bolts evenly all the way around the plate. And don't forget the pilot bushing or bearing.

Posted on Jan 12, 2009

  • 478 Answers

SOURCE: 2.6 isuzu

go to the auto store and get some engine restore its not a permenant fix but that and 40 wieght oil will get you a couple of thuosand mile.

Posted on Mar 14, 2009

  • 159 Answers

SOURCE: I have a 90' Isuzu pickup 4x4. The clutch pedal

you have either air in the line or a bad slave cylinder

Posted on Jun 05, 2009

  • 270 Answers

SOURCE: Do you have a detailed vacuum diagram for a 94'

I don't know how this copy and paste will turn out but here goes.

Posted on Apr 23, 2010

  • 130 Answers

SOURCE: clutch went out on my

basically this all it it a long flat head screw driver that youll be able to use in a typicall way. heres the link check it out. hope this helps you. i done it with a long scredriver

Posted on Aug 01, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 93 Isuzu pup go in gear but don't move the clutch was slipn and now nothing is it the clutch and is it hard to install one

Sounds as if clutch has died. Replacement requires removal of either the trans or the engine and resurfacing of the flywheel, so some special tools are needed and a good torque wrench. Buy a shop manual for complete procedure.

Jul 23, 2015 | Isuzu Cars & Trucks

1 Answer

Picture diagram or written detailed instructions on how to replace heater core in a 92 ford taurus?

I have done this in an '86 Sable which is very similar. It is a very long process (an 8-10 hour job as listed by Ford Service).

Basically, you are going to have to drain the coolant, evacuate the air conditioning system of refrigerant, disconnect the battery, disable the airbag system (if applicable), remove the panel under the steering wheel, drop the steering column, remove the dashboard, cut the A/C plenum and remove the A/C evaporator, remove the heater core.

This is a very big job for a do-it-yourselfer, but it has been done. I highly recommend buying a Chilton manual or borrowing from a library. Some libraries have the Chilton manuals available for viewing online.

Good luck from Detroit, MI

P.S.: When I did all that on my Sable, it turned out that the heater core wasn't leaking... the hose clamps were loose and a hose was shooting coolant through the firewall into the heater plenum! D'oh!

Oct 25, 2011 | 1992 Ford Taurus

1 Answer

Need the diagram for clutch assemby, mainly clutch pedal spring set up for 1993 isuzu rodeo

There's not much to it really, just a mounting bracket, a pedal arm and a simple twist-spring.


Sep 25, 2011 | Isuzu Rodeo Cars & Trucks

1 Answer

My clutch pedal in my 1996 ford f150 goes to the floor and doesn't come back up. I flush the hydraulic line and refilled it. What could be wrong?

The problem is the clutch master, it needs a new assembly.
Replace the clutch master assembly and piston inside don't retract anymore, rubber caps are already worn out. The cheapest way is buying a new set of clutch master kit( internal parts only ).
Bleed the system afterwards.

Hope that helps you out!

Aug 07, 2011 | Ford F-150 Cars & Trucks

1 Answer

I need a diagram of the rear brake assembly. (He wants pictures how to assemble the springs) We have found that the Chilton website charges. (don't blame 'em they have to sell books.)

if you haven`t started do one side first then the other.if you have it apart then you could go to the library and get a book for the car that will show you what you don`t say what car and year this is as some are different than others even in the same manufacture make.

Jul 05, 2011 | Ford Taurus Cars & Trucks

1 Answer

Own a 2003 Mustang Cobra, need to know where to look to be able to adjust the clutch assembly, thanks!

If it's a stock set up you adjust the clutch by lifting the clutch pedal up.
The instructions are in your owners manual or if you don't have it go to this Ford website to view or download it for free.

Sep 17, 2010 | 2003 Ford Mustang

Not finding what you are looking for?
1992 Isuzu Pickup Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14378 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides