Question about Honda Accord
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There likely is a spec for oil pan but unless you are a finatic, you really don't need to know what it is. Simple rule: Don't crank down ******* any fastener. If corners near crank ends have larger fasteners, you can tighten them a bit more than on siderails. Before tightening anything, install all bolts finger tight, to ensure that they are not cross threaded. To avoid warping pan, tighten from the center of the pan, working towards both ends, alternating from side to side as you go. When you are finished, go over it again, using the same amount of force on each bolt. As I said, end bolts can if larger in diameter, be tightened more but be careful not to tighten so much that you will either split or push the gasket out the sides.. Anywhere two gasket ends **** together, I recommend using a sensor -safe dab of silicone. An oil pan is not under any mechanical stress or pressure. I have used this method for many years and NEVER had one leak. If you really need #s, small fasteners get about 12-15in lbs, larger ones about 20.
Posted on Dec 31, 2008
the main bearings bolts is to 1st step 30Nm or 22lbs ft and the last step is 75Nm or 54lbs ft in this tighten secuence. 9 3 1 5 7 on the top bolts and........ ........ ........ ... 8 6 2 4 10 botton bolts and the connecting rod 45Nm or 34 lbs ft i hope be help you
Posted on Nov 09, 2009
Tips for a great answer:
May 21, 2016 | Jeep Cars & Trucks
Mar 10, 2013 | Cars & Trucks
Mar 20, 2010 | 2000 Honda Accord
Mar 09, 2010 | 2001 Pontiac Bonneville
Nov 09, 2009 | 1996 Honda Accord
Oct 08, 2009 | 1993 Honda Accord
Aug 18, 2009 | 1991 Honda Accord
May 17, 2009 | 1997 Ford Ranger SuperCab
Aug 15, 2017 | Honda Cars & Trucks
509 people viewed this question
Usually answered in minutes!