Question about Dodge Durango
Harmonic balancer torque specs
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Head Torque sequence
Step 1: torque to 50 Ft/Lbs
Step 2: torque to 105 Ft/Lbs
recheck final torque in sequence.
Torque intake manifold: Step 1: 12 inch/Lbs, (hand tight) Step 2: 72 inch/Lbs, (6) Ft/Lbs Step 3: 12 Ft/Lbs
torque intake plenum: Step 1: 24 inch/lb (hand tight) Step 2: 48 inch/lb (4) Ft/Lbs Step 3: 84 inch/lb (7) Ft/Lbs (To torque bolts, start in center using crisscross pattern)
Posted on Apr 07, 2009
There is a nut in the center of the balancer... loosening may require an "impact" or a sharp blow with a hammer to begin to loosen the nut. Once loose, you can use a harmonic balancer puller (rentable at a local rental yard) Since its a very tight fit you'll need the puller to persuade it loose from the crankshaft.... watch your knuckles...
Posted on Oct 14, 2009
go to autozone.com and set up a free account. You will then have access to vehicle repair guides and can get all the info and diagrams you need. Hope this helps!
Posted on Jan 02, 2010
This is a specialty tool and you can probably borrow or rent one from Advance Auto parts or Auto Zone.They are also not to expensive to buy but since you will probably never use it again I would just rent one. The tool has a bolt through the center that pushes into your crankshaft and bolts on the outside of the puller that bolt into the bolts that hold on your lower pulley. After you attach the puller when you tighten the center bolt it will pull the balancer off. The tool is called of course a hramonic balancer puller. Hope this helped you out, Roger
Posted on Feb 08, 2010
Tips for a great answer:
Jan 11, 2017 | 2002 Dodge Intrepid
Oct 18, 2016 | 1994 Buick Roadmaster
Mar 21, 2014 | Honda Odyssey Cars & Trucks
Feb 19, 2012 | 2001 Dodge Durango
Aug 30, 2010 | 2004 Dodge Ram 1500
Jan 02, 2010 | 2001 Dodge Durango
Sep 11, 2009 | 2001 Dodge Ram 2500 Truck
Apr 07, 2009 | 1999 Dodge Durango
Jul 16, 2008 | 1991 Buick Century
Nov 18, 2017 | Dodge Cars & Trucks
Nov 17, 2017 | Dodge Intrepid Cars & Trucks
156 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: