Question about Cadillac Escalade
Bad speed sensor in one of the wheelbearing gunna have to replace the wheelbearing with the bad sensor
Posted on Dec 02, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi. this is a very important alert. the stability system on this suv is very sophisticated. there are many sensors that work together with other modules and control units to keep this SUV from rolling over during an abrupt action, due to an extreme situation.This light is warning you of a appending fault that is occurring in one or more of the sensors on board. the best solution is to take your suv to the dealership for a brisk cpu scan. This way, you can find put which sensor it is that is malfunctioning and fix it.
Please rate and god bless:)
Posted on Apr 02, 2009
SOURCE: service stability system
one of the four load stability sensors (one at each wheel suspention arm) has gone awry. Computer diagnostics (Advanced scan tool) will tell you which one. Suggest replace both on front or both on rear (whichever the case)
Posted on Jul 04, 2008
SOURCE: abs light/traction control light
You can check out what the trouble code is by pushing and holding the information button and the up arrow (right side of instrument cluster above the radio) until all the instrument clusters light. Press the information button (last) to enter test mode. I've had an error C1234, meaning Left rear wheel sensor fault. I found the problem to be a corroded connector under the chasis just under the rear left door about 2 feet in. I had to by-pass (replace 1 wire due to corrosion at the connector.
Posted on Sep 15, 2009
The problem is the wheel bearings that have the ABS sensor attached. Check the computer for the code as there is also an up date for the wiring sytem with a jumper for $60 fix that possible could solve the problem.
Posted on Nov 20, 2009
you have to fix the problem with ur brakes- first check the wiring ,connectors and connection clips to the abs sensors and modulator if looks ok than have truck scanned some auto stores such as auto zone / advanced auto do it for free the code will give u a start point towards fixing ur problem--visual inspection of brakes doesnt always show problem
Posted on Nov 26, 2009
Tips for a great answer:
Feb 24, 2016 | Cars & Trucks
Feb 02, 2014 | 2004 Cadillac Escalade
Whenever this warning light or any
other stays on in the dash it is indicating that the systems control
module (or the system sensor in the case of lights like low oil
pressure, door open indicators etc.) has detected a fault, it then
disables the system (this applies to ABS,TCS, TCM, SRS, TPMS, MIL,
CEL and BCM faults and others) as long as the light is on. You must
now have the dealer hook up a special electronic diagnostic tool and
"scan" the system for the fault code that is stored for the
Legend of Abbreviations. ABS Anti-lock brake system. TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module. TPMS Tire Pressure Monitor System, MIL Malfunction Indicator Lamp, CEL Check Engine Light.
Dec 21, 2012 | 2003 Cadillac Escalade
Mar 17, 2011 | Chevrolet Aveo Cars & Trucks
Oct 02, 2010 | 2002 Cadillac Escalade Ext
Aug 20, 2009 | 2002 Cadillac Escalade
Mar 03, 2009 | 2003 Ford Explorer
243 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: