Question about 2004 Mercedes-Benz CLK-Class

1 Answer

Need help removing right rear panel on my car because the window would not go up at all!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 378 Answers

Find all the screws or bolts in the panel some can be hind plastic pieces that come off and when you got all the out grab the door handle in the inside and hold the door and pull very hard like you are shuting it if you dont have a panel tool than use that

Posted on Dec 02, 2012

  • Deon Davis
    Deon Davis Dec 02, 2012

    its the right rear panel on a convertible

  • michael kitchen
    michael kitchen Dec 02, 2012

    well take the screws out and rip it off not hard

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

I need instructions on install/uninstall right rear power window on a 2002 Buick Lesabre.


First you need to remove the inner door panel, it will be held on by screws and clips.

Jul 21, 2008 | Buick LeSabre Cars & Trucks

1 Answer

HOW TO REPLACE RIGHT REAR DOOR WINDOW ON 98TAURUS


Once you get the door panel off you can easily see how to remove the window which is riveted to the window regulator..Here are instructions for determining the rear door in a Taurus.
    • Pluck the window switch and lock switch from the rear door panel with the trim tool. Pull the wiring plugs out of each switch manually before setting the switches aside.
    • 2Remove the rear door panel retaining screws with either the Phillips screwdriver or socket set, depending on the year, make and model of your vehicle. If the panel will not lift off the rear door at this time, you may need to pry the door panel trim pins out of the door with the trim tool before removing the panel by hand. (This too will depend on the year, make and model of your vehicle.)
    • 3Raise the rear door window glass by hand and secure it with packing tape in the fully upright position to prevent unintended glass movement. Manually pull the wiring plug out of the rear window motor.
    • 4Remove the rear window motor retaining bolts with the socket set. Pull the old rear window motor out of the door through the door access hole. Position the new rear window motor in the door and bolt it in place with the socket set.
    • 5Reinstall the rear door panel on the rear door by reversing the door panel removal steps. Make sure to remove the tape from the window when done before you attempt to open the window.

Oct 04, 2012 | 1998 Ford Taurus

1 Answer

How do you remove left rear door panel? need to replace power window motor


Most GMs are pretty much the same. Remove the inset around the door handle - there may be one screw and then it should slide out.
The panel itself is held in with plastic retainers - probably 3-4 along the bottom edge and then 1-2 on the sides. These need to be pryed loose. If you can't get them with your fingers, use some other non-sharp object to help.
Once the panel is loose, keep it close to the door and slide it up - releasing the edge right next to the window glass. You may have to work it back and forth a bit.
When you put it back, getting the edge by the window on right is key to holding the panel on correctly. Many people don't get this seated right and the panels always are loose.

Oct 10, 2009 | 2002 Oldsmobile Alero

1 Answer

Right rear window is off the tracks. How do I remove the panel?


if the window is off track the regulator is probably bad. to remove the door panel should be a couple of screws by the inside pull handle and possibly one by the door handle itself also check the bottom of the door for any then just pull it off and lift up to clear latches and remove plastic film to get to inside of the door

Aug 30, 2009 | 2001 Oldsmobile Aurora

1 Answer

How do you remove the right rear panel that covers the rear A/C?


fold 2nd row seat fwd, remove rear 3rd seat if equipt.,remove carpet,access screws etc. remove window trims as required,remove panel.....GL...

Jul 04, 2009 | 2004 Ford Expedition

1 Answer

1995 toyota celica


With the year of the car, the electric motors for the windows are weakening. the rubber seals on the windows have so much hold on the window, that a weak motor will not have enough power and thus will need to be replaced. You can remove the door panels, by removing all the screws, take flathead screwdriver and lighly pry around panel, pull up and remove panel. Then remove inside plastic and you will have access to the window motors.

Apr 30, 2009 | Toyota Celica Cars & Trucks

1 Answer

Rear Window- Drivers side- won't work


Removal and Installation
  1. Remove the rear door trim panel. For additional information, refer to Section 501-05 .
  1. Remove the watershield.
  1. Remove the interior weatherstrip.
  1. Remove the exterior-weatherstrip.
  1. Remove the nut and the rear window stabilizer.
  1. syh~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Prior to removing the rivet center pins, place suitable support between the door outer panel and the glass to stabilize the glass.
    NOTE: Lower the window to access the rivets.
    Remove the two rivets retaining the rear door window glass to the rear door window glass run and bracket.
9eaea6b.gif
  1. Remove the rear door window glass.
  1. To install, reverse the removal procedure.

Apr 09, 2009 | 2000 Ford Taurus

1 Answer

Can't figure how to remove right rear door panel on 2001 Pontiac


These are bad about those Cable operated window devices .. If it is bad get on ebay and get one ordered its your best bet.. Just take a flat screwdriver and go around the bottom of the door panel and pop it loose and up the sides .. there might be a hidden screw or two in the middle around the handles.. good luck ..

Jan 25, 2009 | 2001 Pontiac Grand Am SE

1 Answer

Remove right rear door panel 2003 Buick LaSabre


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Nov 02, 2008 | 2003 Buick LeSabre

Not finding what you are looking for?
2004 Mercedes-Benz CLK-Class Logo

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...